BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Arc flash protection for the toughest conditions, will not drip, melt or ignite. Made from durable and comfortable materials. Seamless knitted liner of glass fibre, para-aramid, meta-aramid, nylon and spandex with a smooth finish mixed coating of nitrile, chloroprene. With plastisol prints on the back of the hand for extra protection. Sizes: 6-12.
Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Thumb and forefinger reinforced, double stitched, precurved fingers, the palm has a striking red color. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Completely winter lined. Touchscreen function on the forefinger. Sizes: 7-11. Conform: EN388:2016 3.X.4.2.D.P, EN407: X.1.X.X.X.X, EN511: 1.2.1
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Nitrile coating on the palm with sand grain finish for extra grip. Fleece lining for extra warmth in cold temperatures. Reinforced thumb hole to reinforce high-wear areas. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.F.P
Specially developed for operating firearms, ultra-thin and slim wit, feels like a second skin. The synthetic suede in the palm protects the user against contact heat of 100°C for 10 seconds.
A general purpose safety glove made of 13gge HPPE fibers with black PU coating on the palm. Guarantees all-day comfort. Suitable for fine work with limited cutting risk. Sizes: 6-11. Complies with: EN388:2016 4.X.4.2.B
Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity <(>&<)> tactility versus double gloving. Excellent dry <(>&<)> wet grip enhance dexterity and reduce hand fatigue. Cuff can be folded to act as a gutter to prevent chemicals running down the arm.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
Electrically insulating glove with mechanically strong resistance. Protects against risks of Arc Flash. Outside in black, inside in red, outside has a non-slip coating. working voltage of 17.000 volts, test voltage of 20.000 volts. Length 360 mm, Sizes: 7-12. In accordance with EN60903 class 2 cat RC. ASTM F2675: 55 cal/cm²; IEC 61482-1-2 Box tested: APC-2
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 27 cm.
Warm, insulating gloves with RIPEL™ technology provide fully water-proof gloves. Leading dexterity among liquid-proof cold weather gloves. PVC-foam coating stays flexible down to -25°C, food approved.
Tropic glove in synthetic leather with cotton back and velcro closure. Sizes: 7-11.
Heat-resistant glove, Cotton, Nitrile-dots, Dots. Withstands contact heat up to 250°C, Extra long, for allround work. EN 388:2003 1.2.3.2 EN407 0.2.X.X.X.X
Providing incredible EN388: 2016 level F cut resistance (ANSI 105:2016 A8), the glove is light and dexterous able to be worn for long periods of wear. An extended cuff provides added protection to the wrist area and all gloves in the food range can be industrially laundered to the ISO 15797:2018 standard. EN388: 2016 level F cut resistance (ANSI 105:2016 A8); EN388: 2016 4 × 4 X F; New yarn structure delivers improved grip and mechanical performance; Permanent antimicrobial component; Free from glass fibre to prevent product contamination; Tested to EN ISO 15797 industrial wash test to withstand x50 washes at up to 85°c and drying up to 70°c with no effect on cut resistance; Colour coded to prevent cross-contamination; Designed for knife hand use; Ambidextrous.
Arc flash protection for the toughest conditions, will not drip, melt or ignite. Made from durable and comfortable materials. Half lined para-aramid 180g, goat leather, with para-aramid threads, precurved fingers. Sizes: 7-12.
Waterproof goatskin work glove designed for tough, wet outdoor environments exposed to heat. The glove has reinforced knuckles and i nner hand. Fully lined with paraaramide, which also provides cut protection level B. Double stitched, heat-resistant seams. Equipped with an extended goatskin cuff for additional protection up the arm. Certified for welding and in accordance with ATPV level 4 CAL 47. Sizes: 7-12.
Durable un-lined glove in synthetic leather with great dexterity and a good grip. The pre-shaped fit makes the glove comfortable and flexible, an elastic at wrist and a half-length cuff to ensure that the glove stays firmly in place. Sizes: 6-13.
Synthetic combat glove, with kevlar protection elements on the knuckles and ventilation on the top of the finger. Water resistant, Touch screen on the palm and all fingers. Chrome free. Suitable for public order and police services. Sizes: 7-12. Complies with: EN388:2016 3.1.3.2.X.P, EN407 X.1.X.X.X.X
Fully lined, comfortable glove from the Arctic series. Made for the cold and harsh conditions. A quality glove with a waterproof membrane, adjustable Velcro strap at the wrist and a pull tab at the cuff with an opening for the carabiner. Soft goat leather for superior comfort, touchscreen function and reinforcements in the palm. Size 7-12. Complies with: EN388:2016 3.1.2.2.X, EN511: 3.2.1, EN407: X.2.X.X.X.X
Anti-riot gloves for use in a law enforcement environment during demonstrations, events, etc. Perfect blend between dexterity and pr otection. 360° heat resistant and flame retardant kevlar lining and cut resitant. Sizes: 6-14.
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Content size XL: 170 pieces.
Navy blue disposable nitrile glove. Powder-free and latex-free. Ambidextrous, with roughened fingertips. Designed for use in laborat ories and research environments. Version with long cuff.
This glove combines 3 important elements needed for handling ropes: dexterity, high abrasion resistance, and good grip.
Top quality welding glove made of black analyne leather on palm and back and lined cuff of 15cm in super split leather for even better heat resistance. This glove is super comfortable and has a good dexterity. The palm is extra reinforced, which increases the durability of the glove. With kevlar seams.Glove can be used for MIG/MAG and electrode welding. Available color: black/gold Available sizes: 10, 11
Strong hook and loop fasteners with universal systemfor molle or belt. Perfect for plate carriers, backpacks and all belt systems. Easy to open and close with additional tab, multi-purpose system for gloves, ropes ,...
Synthetic leather glove, Winter-lined, 0,7 mm, Microthan®+, Diamond grip pattern, Polyester, Fleece, Cat. II, Black, grey, yellow, Chrome free, Water repellent, Elasticated 180°, for allround work . EN 388:2003, 2222 EN 511:2006, 120
Synthetic leather glove, Winter-lined, 0,7 mm, Microthan®+, Diamond grip pattern, Polyester, Fleece, Cat. II, Black, grey, yellow, Wrist support, Chrome free, Velcro®, for allround work . EN 388:2003, 2322 EN 511:2006, 21X
Dexterous cut resistant glove with highest cut level F, suitable for precision work. Ultra light thanks to 18 gg knitted with CRF® Omni cut resistant technology. Palm dipped with super soft nitrile foam that provides excellent grip on dry surfaces. Reinforced thumb crotch for improved longevity. Breathable materials for all day comfort. Wide range of sizes means a perfectly fitting glove for everyone. Skin friendly with Derma-test and Oeko-Tex certificate. CAT II . In line with : EN 407:2004 X1XXXX - EN 388:2016 4X43F - EN 420:2003+A1:2009
Probably the thinnest cut F glove on the market, made with the new advanced CRF®Omni technology, nylon and elastane. 18 gg knitted glove and PU-dipped, superior for any work with very sharp and small objects. Reinforcement between the thumb and index finger and touchscreen functionality. The new CRF® Omni technology does not contain any steel or glass fiber that can irritate the skin. The gloves stay soft and comfortable throughout the work task. CAT II . In line with : EN ISO 21420:2020 - EN 388:2016+A1:2018 3X43F
Unlined ultra-chemical-resistant glove offering comfort and dexterity.
Soft and versatile glove with cut protection (level C/ANSI cut A3), made from recycled polyester and bio-based Dyneema® fibers - an innovation that limits dependence on fossil raw materials. Good for the environment! 13 gg knitting technique with touchscreen function - use your smartphone with gloves on. Less water consumption due to the new nitrile foam coating. Sizes: 6-11. Conforms to: EN 388:2016: 4.X.4.2.C and EN 407:2020: X.1.X.X.X.X.
Very soft, durable assembly glove made from recycled polyester. One pair is equal to a 0.5l PET bottle. The glove is 15 gg knit, contains spandex and has a new nitrile foam coating that uses less water in production. Touchscreen function - operate your smartphone with gloves on.. In line with : EN 388:2016+A1:2018 4121X - EN 407:2020:X1XXXX
Very thin and flexible cut protection glove for fine assembly work with small, sharp objects. The cut protection is made from the world's first bio-based cut-resistant fiber - Dyneema®. This innovation reduces dependence on fossil raw materials and reduces your company's carbon footprint. Good for the environment! The glove is very light, 18 gg and has a PU coating for better grip. Conforms to: EN388:2016+A1:2018: 2X41B
Electric glove in natural rubber latex. Operating voltage of 26.500 volts, test voltage of 30.000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 360 mm. IEC 61482-1-2 Box tested: APC-2
Electrically insulating glove with mechanically strong resistance. Protects against risks of Arc Flash. Outside in black, inside in red, outside has a non-slip coating. working voltage of 7.500 volts, test voltage of 10.000 volts. Length 360 mm, Sizes: 7-12. In accordance with EN60903 class 1 cat RC. ASTM F2675: 45 cal/cm²; IEC 61482-1-2 Box tested: APC-2
Cow grain leather glove with cotton back, semi-lined. Sizes: 8-11.
Seemles knitted nylon-spandex gloves (18 gauge) with insulating double layer nitrile foam on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Seemles knitted nylon-spandex gloves (18 gauge) with 3/4 insulating double layer nitrile foam on the palm. Heat resistant up to 100°C contact heat. Sizes: 7-11.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The 3/4 nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex Certified.
Seamless insulate lined glove with water repellent natural rubber latex on the full glove, with a dual rubber latex coating with rough finishes surface on the palm. The dual coating provides high abrasion resistance and longer usage. Designed to protect at temperatures down to -30°C for short or intermittent contact and to contact temperature up to 250°C for 15 seconds. Anatomical hand shape design and high visibility orange color. Sizes: 7(M)-10(XXL).
Medium duty impact glove with slip-on cuff and double-layer palm made of cut-resistant synthetic leather. TPR impact protection with ANSI / ISEA 138 score 2. Reinforcement around the index finger to protect abrasion-sensitive areas. Highly visible for extra safety. Sizes: 6-13. Conforms to: EN388: 2016 3.X.4.3.E.P
Chemical resistant PVC glove with impact and cut protection. TPR impact protection on top of the hand and full length of fingers. PVC coating for waterproof and chemical resistance. Inside liner provides all round 360 degree cut resistance. Durable textured palm coating for enhanced grip. Sizes: 8,10 and 12.
Tactial cut protection glove for universal interventions, with excellent dexterity on the 'trigger' finger, touch screen function, padding on the palm, and silicone dots for an excellent grip. With extra choc protection on the back of the hand. Sizes: 6-11.
Glove with impact and cut protection that keeps hands warm and dry. TPR impact protection on top of the hand and over the entire length of the fingers. 70gr Thinsulate™ insulation for extra warmth, the patented waterproof barrier keeps hands dry. Features PVC patches on the palm for extra grip, and an extra layer on the palm provides extra cut resistance. The extended cuff with gaiter closure keeps the dirt out and has reflective bands for extra visibility. The tips of the index, middle finger and thumb are suitable for use with touch screens. Sizes: 8-12. Complies with : EN388:2016 3.X4.4.F.P, EN511:1.2.1
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
A warm and durable mitten glove in the Freez range, well suited for cold environment work and freezer. The Guide GTX - Armor reinforcements in palm, fingertips, thumb and indexfinger makes the glove really durable. The elastic at wrist and the lined part towards the knitted cuff prevents cold air from entering the glove. The extra lining on back of hand gives this glove an exellent cold protection. Touchscreen at fingertips back of hand. Size 7-12.
Made of graphene fibers, without stainless steel or fiberglass, with unique heat regulation. Odor neutralization and bacteriostatic properties make the arm protector smell fresh and kill harmful bacteria.
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass
Fine knitted cut-resistant glove 18 gauge made of kyorene fibers with bacteriostatic, heat-regulating and odor-neutralizing properties with a black nitrile foam coating, impact protection on the back of the hand and extra reinforcement between thumb and index finger. Without stainless steel or fiberglass. Compatible with touchscreens.
Butyl rubber glove against very aggressive chemicals. Improved ergonomics and increased flexibility through a unique butyl formula that feels soft and maximizes flexibility and dexterity. A reinforced grip due to a raised diamond pattern. Length 35 cm, thickness 0.35 mm. According to EN 374-1:3016 TYPE A - ABCIKMPST and 374-5:2016
Versatile tactical winter glove designed to enable weapon operation and precise frisking. Slim all-round fit and exceptional dexterity. Windproof and water-repellent durable softshell fabric with fleece liner, TPR reinforcements, touchscreen compatible.
Very abrasion-resistant glove with innovative ErgoShield protection: TPR impact protection on the back of the hand, tight fit. Semi-fingerless design ensures perfect control during weapon operation and touch screen devices.
Cut-resistant glove in special graphene fibers with HCT® micro foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers.
