Disposable coverall in polypropylene SMS with hood and two-way zip with zip flap. Model for general purpose applications. Three-thread overlocked seams and elastic hood, waist, ankles and wrists. Available in white and blue. Type 5-6.

Coverall, 65 gr/m² , microporous film laminate, lightweight, hood, elastic waist wrists and ankles, 3 thread over loch stitch.

Coverall, Tyvek®, breathable, antistatic, limited chemical resistant to water-based products, does not pill, stitched seams at outside, new improved hood with elastic, elastic at wrists (new design) and ankles, zip closure under flap.

Coverall in PE, laminated, yellow, chemical overall, for limited use.Protects against harmful chemical spatters and sprays. Model wi thstitched and taped seams, two times zipper under flap, with hood andelastic at the wrists and ankles, reinforcement at the knees. Suitablefor: chemical and petrochemical industries, pharmaceutical industry, waste collection and processing, tank cleaning, emergency response services, all activities involving risk of contamination with less aggressive chemicals. Sizes: S - XXXL.

Coverall, polymer coating, stitched sealed seams, zipper under double adhesive cover, elastic at wrists and ankles, elastic in the waist, fixed hood (also with elastic), thumb loops. Recommended for treatment of chemicals, 100% particle tight, resistant to splashes of hazardous liquids (up to 2 bar). Available in: yellow.

Coverall, double polymer coated, extra layer of chemical resistant film, 100% particle tight, resistant to splashes of hazardous liquids (up to 5 bar), fixed hood with elastic, stitched and sealed seams, elastic at wrists and ankles and waist, zip with double flap and adhesive, thumb loops. Available in: orange, gray.

Coverall, 50gr./m² polyester viscose rayon mix, firming nylon film on the inside, non-woven, flame retardant, limited use, to wear above heat- insulating clothing, 3-thread overlock seams, offers protection against hazardous dust and dirt. Available in: Blue.

Coverall, non-woven, limited use, flame retardant, chemical resistant coating, antistatic, hood with elastic, double zip closure withdouble flap, elastic at wrists and ankles. Available in: grey, orange.

Coverall, 63gr./m², microporous fim laminated, good moisture vapour transmission, three-piece hood, antistatic, elastic at hood, elastic at wrists, elastic at ankles, elastic at waist, zip closure under flap, 3- threads overlock and taped, breathable back in Safegard blue. Available in: white.

Coverall with hood. Stitched and over-taped seams. Thumb loops. Elastication at wrists, ankles and face. Elasticated waist (glued-in). Tyvek® zipper. Self-adhesive zipper and chin flap. White with bright orange tapes. Antistatic (inside). Additional taping of cuffs, ankles, hood and zipper flap required to achieve Type 3 liquid tightness

Coverall, laminated, for limited chemical use, composed of various composite layers, including the highly protective EVOH layer. Protects against hazardous chemicals in spray and liquid form. Grey version has stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, reinforcement on the knees.

Coverall, laminated, white, chemical overall for limited use, with a Saranex 23P barrier film. Protects against hazardous chemical spattersand sprays. Model with stitched and taped seams, two times zipper underflap, with hood and elastic at the wrists and ankles, reinforcement onthe knees.

Coverall, Tyvek, breathable, resistant to water-based chemicals, back side made of breathable material, antistatic, does not pill, elastichood, elastic at ankles and wrists, Tyvek zip closure with flap.Available in: white.

The SC1 in bleu laminate is a single use Type 3 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter. One piece construction, with chemically protective laminated gloves Kemblok welded to the suit material and integral socks in the same blue laminated material. Hood with neoprene rubber face seal. Sizes S - XXL: SCertified to EN14605:2005

Coverall, 2-piece hood, external yellow stitched in seams, elasticated waist, cuffs, ankles and hood, nylon zipper. Category III, Type 5/6

Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside).

Disposable coverall in lightweight, breathable, anti-static SMS material. Comfortable coverall with hood, elasticated around the face, wrists, waist and ankles. Stitched seams. Protection against hazardous dirt and dust and liquid aerosol. Can be used for work in hot environments. Available sizes: S-3XL. Available colours: White. Conforms to: EN13034, EN13982, EN1149 and EN1073-2.

Coverall, 65 gsm microporous film laminate, with 55 gsm SMMS polypropylene back panel, covered over by the microporous film laminate. with Hood, elastic waist wrists and ankles, Taped seams. White with orange panel on the back.

Coverall in PE, laminated, yellow, chemical overall, for limited use.Protects against harmful chemical spatters and sprays. Model with stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, Safegard Panel on backside.

DuPont ™ Tyvek® 600 Plus. Hooded suit available in white, sizes XS to 7X (also available in green). Robust and light (<(><<)>250 g per garment). Self-adhesive flap on the chin for optimal fit around the mask. Elastics around the face, wrists and ankles and elastic waistband. Elasticated thumb guard prevents the sleeve from rising. Tyvek® garments are made from high-density, high-density polyethylene, providing the ideal balance of protection, durability and comfort. Tyvek® is permeable to air and water vapor, while repelling aerosols and aqueous liquids. It provides an excellent barrier against fibers and fine particles (up to 1 micron), has extremely low particulate release and is antistatic. No silicone additions Tyvek® 600 Plus apparel applications include maintenance and dismantling of the nuclear industry, the pharmaceutical industry or research and biosafety laboratories, as well as medical applications and exposure to biological hazards. Certified selon Regulation (EU) 2016/425 Chemical Protective Clothing, Category III, Type 4-B, 5-B and 6-B EN 14126 (barrier against infectious agents) Antistatic treatment (EN 1149-5) - both sides Robust and protective seams (sewn and covered) Tyvek® Flap Closure for added protection Elasticated around the face, wrists and ankles for optimal fit and to reduce contamination and fluffing

Splash suit made of blue laminate. Suit with attachedc hemically resistant Kemblok gloves. The pant legs have integral socksandstraight legsthat can bepulled over boots. The zipper is located on the back of the suit. The suit is designed to be worn over the compressed air equipment. Available in: blue. Sizes: S - XXL.

Lightweight overall with hood, made of SMMS polypropylene, intended for limited use in dry conditions. Combines protection against dirt and non- hazardous substances with high comfort and breathability. Features nylon zipper with flap, external seams and elastic at wrists and ankles.

Lightweight and flexible chemical suit designed specifically for protection against Ebola and other viruses. Combines Type 3 <(>&<)> 4 design with the infectious agent protection of a barrier film and stitched and taped, fully sealed seams.

Chemical overall made of PVC C2. These overalls have an attached hood with elastic and an extra high collar. The sleeves have an inner sleeve with elastic and an outer sleeve with Velcro. The pant legs have Velcro closures. The overall features a white area on the chest for application of numbering. The zipper has an extra high V-flap inside and an outer flap with Velcro. Available in: green. Sizes: S - XXXL.

Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Suitable for work in ATEX environments only in combination with Hazmax ESD boots. Sizes: S - XXL.

Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside). Includes dissipative socks. Available sizes: S-3XL. Available coloours: Gray.

DuPont™ ProShield® 20 SFR. Limited flame spread coverall (index 1) with hood. Stitched external orange seams. Elasticated wrists, ankles, face and waist. Colours: Xhite Sizes: M-3XL. Compliant with: EN 1073-2:2002, EN ISO 13982-1:2004 +A1:2010, EN 13034:2005 + A1:2009, EN 1149-5:2008 and EN ISO 14116:2015.

Chemsol Plus boilersuit with hood and elasticated wrists.

High visibility disposable coverall in TYVEK® (type 5/6). Coverall with collar, reflective striping on the shoulders, chest, arms and legs. Elasticated waist, ancles and cuffs, zip closure. Available sizes: S- 3XL. Available colour: hi-vis orange.

Overall in grey Tychem F material with fixed socks and attached neoprene gloves. Provided with Butyl facial seal to support mask. Zipper on back at shoulder height overlaid flap. Conforms to EN14605 Type 3-4, EN 1073-2 and EN 14126:2003.

Disposable overpressure suit for connection to compressed air net. Equipped with large visor for a wide field of vision. Panic strip ensures that it can be removed extremely quickly. Equipped with CEJN series 341 coupling. Suit made of blue lamination with fixed gloves Kemblok.

Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Sizes: S - XXL.

High barrier Type 3 <(>&<)> 4 chemical suit combined with FR properties. Can be worn over Thermal Protective (EN11612) Garments without compromising thermal protection as a standard chemical suit would. Quality: PVC film / EVOH film/ woodpulp/polyester nonwoven fabric. 232g/m². Available sizes: S-XXXL. Available colours: Dark blue.

Neoprene rubber chemical overalls. The integrated hood is attached by an elastic strap. The diagonal zipper has a double flap with Velcro, and the sleeves have a double elastic closure. The pants' legs also have a double elastic closure and elastic straps under the sole of the foot. Available in: yellow. Sizes: M - XL.

Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed kemblok gloves. The suit is designed to be worn over the compressed air equipment. With pass-through and CEJN couplings to be able to connect to external air source. Available in: yellow. Sizes: S - XXL.

Overall, polypropylene with a microporous film, limited use, microporous film gives for extra protection in damp conditions such as light splashes of few hazardous liquids.

Ventilated coverall with stitched and over taped seams. Fully enclosed over hood with clear front and crown see through visor. Front closure with double flap hook and loop, single zipper closing to center, horizontal opening. Three exhaust valves; two at hips one in hood back. Air distribution plenum made of Tychem® 6000 fabric. Emergency Egress. Attached non-dissipative under gloves and integrated dissipative socks. Conform: EN 1073-1, EN 1149-5, EN 14126, EN 14594, CAT 3 *Made to order. Available sizes: S-3Xl Available color: grey

Gas tight suit Viton / butyl / viton, the most resistant material for reusable suits. Suit with replaceable boots. The breathing app aratus is worn inside the suit. Equipped with a connection for automatic switch valve. With replaceable gloves. The Hazmat suit come s in a suitcase. Available in red. Sizes: specify.

Gas suit in butyl The suit has fixed boots size 46 and gloves. The pressurized air device is worn outside. The suit comes with a 3S full face mask and a long gas-tight zipper that goes over the head. Suitable for LA96 PF lung governed demand valve and adapter for LA96 ASen AUTOMAXX. Harness mask on the inside. Perfect seal due to integrated mask. Sizes: Universal.

Gas tight splash suit made of chemprotex 300. Suit with attached chemically resistant butyl gloves. The pant legs have integral socks and straight legs that can be pulled over boots. The gas tight zipper is located on the back of the suit. The suit is designed to be worn over the compressed air equipment. Sizes: S - XXL. Can be used in Atex zones 1 and 2. Conform: EN14605 Type 3. Accessory: anti-mist klar pilot for visor 1002608.

Coverall with hood, elastic face opening and chin flap for a tight fit around the breathing mask, stitched and taped seams, double adhesive zip, double zip and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle-tight fabric, excellent barrier against a wide range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Anti-static treatment (inside). Includes non-dissipative gloves. Available sizes: S-3XL. Available colors: gray. In accordance with: EN 1073-2: 2002, EN14605: 2005 + A1: 2009 (Type 3/4), EN ISO 13982-1: 2004 + A1: 2010 (Type 5), EN 13034: 2005 + A1: 2009 ( type 6), EN14126: 2003 and EN 1149-5: 2008.

DuPont™ Tyvek® 400 Dual TG. Overall with hood. Tyvek® on the front and large breathable SMS on the back. Stitched seams also taped on the upper body: armpits and wrists where Tyvek® liner gloves are attached. Attached Tyvek® socks. Elastic hood. Elastic waist (stitched in). Tyvek® zipper and flap. Chin flap with adhesive tape. NOT individually wrapped, 25 pieces in one box. Conforms to: EN 1073-2, EN 1149-5, Type 5/6 Available sizes: S - 3XL Available color: white *MADE TO ORDER*

Dupont Tyvek® 500 HP (Harness Protection) TY178S HP coverall with four D-ring sleeves attached to the garment.

Coverall, laminated, for limited chemical use, composed of variouscomposite layers, including the highly protective EVOH layer. Protects against hazardous chemicals in spray and liquid form. Grey version hasstitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, reinforcement on the knees, attached boots with boot overflaps, double cuffs, double zip closure and storm flap front fastening.

Gas tight suit Viton laminated, the most resistant material for reusable suits.Suit with replaceable boots. The breathing apparatus is worn inside thesuit. Equipped with a connection for automatic switch valve. With replaceable gloves. The Hazmat suit comes in a suitcase. Available in red. Sizes: specify.

Lightweight gas suit in highly chemical-resistant Interceptor material consisting of 10 layers. Gas-tight, semi-disposable suit: if not contaminated and after pressure test, the suit is reusable. Pressure gauge is worn on the inside. With boot socks, cuffs with glove adapters fitted with Silvershield inner gloves and neoprene outer gloves. Can be kept for 10 years without using with recommendation to perform an annual pressure test. Sizes: S-3XL. Type1aET

Disposable overpressure suit for connection to compressed air network. Equipped with large visor for a wide field of vision. Substantial filter allows filtering of inhaled air if compressed air supply is cut. Panic strip allows you to get undressed very quickly.

Coverall with hood, elastic face opening and chin flap for a tight fit around the breathing mask, stitched and taped seams, double adhesive zip, double zip and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle-tight fabric, excellent barrier against a wide range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Anti-static treatment (inside). Includes non-dissipative gloves and dissipative socks. Available sizes: S-3XL. Available colors: gray. In accordance with: EN 1073-2: 2002, EN14605: 2005 + A1: 2009 (Type 3/4), EN ISO 13982-1: 2004 + A1: 2010 (Type 5), EN 13034: 2005 + A1: 2009 ( type 6), EN14126: 2003 and EN 1149-5: 2008.