BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Comfortable helmet for work and interventions at height and difficult to reach locations. Is fitted with extra-sturdy chin strap closure so the helmet remains in place during a fall. This helmet has no obstructive sun visor, which would obstruct sight while climbing on constructions and manoeuvring through small spaces. Made of indestructible, durable,lightweight polycarbonate. High energy absorbing capacity upon impactduring a fall, both on the top and side of the shell. Equipped with attachment points for helmet mounted light as well as face and hearing protection. Lifetime: 10 years. Universal size, range 53 to 63 cm.Weight: 465 g. Available in: yellow.
Super-light (300 g) safety helmet made of strong ABS. With 6-pointtextile suspension (52-64cm), a handy ratchet and highly absorbenthydro-flock sweatband. This version has extended neck protection withoutventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Available in: white, yellow, blue, red, green, orange.
IDRA 2 ABS safety helmet with integrated flip-up face shield (330x200mm/ 2.2 mm thick) made of polycarbonate, specially approved for short- circuit arc welding (marking 8) and protection from molten metal particles (marking 9). This high-quality shield also has an N approval, which stands for anti-fogging. Impact resistance of 120 m/s (marking B). With 4-point textile suspension (49-63 mm) with ratchet and leather sweatband. The helmet is especially good for work in switch boxes and where there is a risk of ejected particles, from grinders for example.
Safety helmet with integrated face shield (class 1) made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (51-63 cm) and highly absorbent hydro-flock sweatband. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Can be fitted with flip-up safety glasses (to order separately: 1000242).
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-63 cm) and highly absorbent hydro-flock sw eatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Colours: white, yellow, blue, red, green, orange.
Safety helmet made of ABS, fitted with a 4-point textile suspension with wheel adjustment (54-62cm) and synthetic sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.
Polyamide safety helmet with integrated flip-up face shield (310 x 170 mm / 1.7 mm thick) made of polycarbonate, specially approved for short-circuit arc welding (marking 8) and protection from molten metal particles (marking 9). This high-quality shield also has an N approval, which stands for anti-fogging. Impact resistance of 120 m/s (marking B). With 4-point textile suspension (53-63 mm) w ith ratchet and leather sweatband. The helmet is especially good for work in switch boxes and where there is a risk of ejected parti cles, from grinders for example.
Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and suspension with wheel adjustment. Helmet with slot for P3E or P3K adapter. Tested: molten splash metal (MM) and low temperature (-30°C).
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-1-63 cm) and highly absorbent hydro-flock sweatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. Supplied with mesh visor (S59) and Baltic earmuffs. Colour: orange.
Terylene suspension for Concept helmet with slip adjustment.
Waipoua Forestry combination with ABS helmet, earmuff and vizor. A flexible and comfortable solution for face and heariong protection in forestry. Convenient for: forestry. In accordance with: EN 397/EN 352-3/EN 1731
Crowd control helmet made of flame-resistant aramid fabric with special selfextinguishing lacquer with Nomex lining and 3-points chinstrap. Has a clear PC visor with anti-fog (inside) and anti-scratch (outside) and PU-Kevlar neck protection. Ideal in combination with HM50 mask. Weight: 1500g.
3M™ PELTOR™ G500 Forestry combination with Optime I earmuff and vizor 5C. A flexible and comfortable solution for face and heariong protection in forestry. Sizes: 54-62cm. Convenient for: forestry. In accordance with: EN 397/EN 166/EN 1731.
Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with full peak, leather sweatband and a G2D suspension with slip adjustment (54-62cm). Vented helmet with slot for P3E adapter. Tested: lateral deformation (LD), molten splash metal (MM) and low temperature (-30°C).
Super-light (300 g) ventilated safety helmet made of strong ABS. With 6- pointtextile suspension (52-63 cm), a handy ratchet and highly absorbenthydro-flock sweatband. This version has extended neck protection withoutventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Available in: white, yellow, blue, red, green, orange.
Safety helmet with micro peak and integrated arc visor (class 2), made of strong ABS for improved low temperature (-40°) and side impact protection. The transparent, gray face shield provides improved optical properties. With a very high VLT (Visible Light Transmission) value of 82%, colors are much more distinguishable. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
Safety helmet with micro peak and integrated arc visor (class 2), made of strong ABS for improved low temperature (-40°) and side impact protection. The transparent, gray face shield provides improved optical properties. With a very high VLT (Visible Light Transmission) value of <(><<)>50%. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection. ATPV: 36cal/cm². Colours: white, yellow, red and blue.
configuratie op aanvraag/configuration sur demande
Super-light safety helmet for working at height, with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-63 cm) and sweatband. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is required. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. industry, contractors and installation companies. Colours: white, grey, blue, light blue, green, yellow, yellow HiViz, orange, orange HiViz, red, black.
Intervention helmet with special self-extinguishing paint, with Nomex interior and 3-point chinstrap. Adjustable thanks to the rotary knob, 5 different sizes are available. With Pinlock anti-fog double visor.
Safety helmet with micro peak and integrated arc visor, made of strong ABS for improved low temperature (-40°) and side impact protection. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
Helmet liner in flame retardant material. Fits between the helmet shell and the interior, for warmth without compromising on comfort. With zipper connection to the frost neck cape.
Kit for helmet with Contour screen in grey high transparency tint, Contour carrier and chin-guard. Uses nano-particles to protect against mechanical, heat, and radiation risks in the event of arc due to electrical errors.
Trafic Rescue Helmet; It can be esuipped with with hearing protection and clear visor. It can also be fitted with high performance XP-lamp and SCBA mask for rescue in toxic and dusty environments.
Well designed fireman's helmet made of thermo-hardened phenol textile, coated with photoluminescent paint and finished with reflective strips. Easily replaceable PU suspension, height adjustable, with a 4-point fastening strap with wheel ratchet. Pyros offers exceptional shock absorption and is resistant to extreme temperatures. The polycarbonate shield is scratch resistant and forms a hermetic seal at the top to protect against spattering. Shield tested in accordance with EN14458. This high-quality helmet can be worn in combination with corrective glasses, standard compressed air masks with a spider strap, and a communication system. Can be optionally equipped with a neck flap (see figure/ref.: 05550001). Total weight: 1150 g.
Safety helmet with integrated face shield (class 2) made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap, neck and earflap protectio and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet made of ABS, fitted with a 4-point textile suspension with slip adjustment (54-62cm) and synthetic sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.
Protection around the neck in flame retardant fabric with zipper closure at the top for easy connection to the Fleece helmet liner.
Safety helmet with integrated face shield (class 1) made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Super-light safety helmet for working at height, with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) with MIPS and sweatband. The Nexus Extreme Mips combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is required. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Safety helmet with integrated face shield (class 1) made of ABS with grey reflective sticker. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated face shield (class 1) made of ABS with arc flash earflap. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated face shield (class 1) made of ABS with arc flash earflap and grey reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Crowd control helmet made of glass fiber with fire retardant gel coat layer, shock inner lining in PU, 3mm thick pc visoer with anti-mist treatment, neck guard is coverd with flame retardant textile and is attached with press buttons on the inside of the outher shell. The helmet has 7 ventilation holes through the outer shell. The inner liner can be removed whitin seconds and does not absorb any liquids. The chin strap is constructed to be easy to adjust, close and open all with duty gloves on. The chin cup is big enough to make sure that the helmet stays in position during fights.
Super-light safety helmet for working at height, with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (53-63 cm) with MIPS and sweatband. The Nexus Extreme Mips combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is required. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Clear, 4mm PC visor for P100N helmet with anti-scratch (outside) and anti-fog (inside) coating. Medium version (54-61cm).
Transparent chin/mouth guard for P100N helmet. Small version (46-53cm).
Transparent chin/mouth guard for P100N helmet. Large version (62-67cm).
Transparent chin/mouth guard for P100N helmet. Medium version (54-61cm).
Safety helmet with integrated face shield (class 1) made of ABS with red reflective sticker. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated face shield (Class 1) made of ABS with arc flash earflap and red reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Super-light safety helmetwith short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) with MIPS and sweatband. The Nexus Extreme Mips combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Additional 4-point chinstrap harness. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Clear, 4mm PC visor for P100N helmet with anti-scratch (outside) and anti-fog (inside) coating. Small version (46-53cm).
Clear, 4mm PC visor for P100N helmet with anti-scratch (outside) and anti-fog (inside) coating. Large version (62-67cm).
The FCT helmet is designed to give maximum protection for the training. However, the head is never a target area in close combat training. The maximum opening on the cage is 15 mm in the front of the cage. There is a double locking with velcros on the back of the helmet. On the ear area there are two holes. Outside material: nylon with PU outer surface; plastics: 1,5mm HDPE.
