BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
A supple glove with cut, puncture and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and the fingertips from needles and sharp objects. Knitted of HDPE cut-resistant fibre, which gives the whole glove cut protection level 5 according to EN 388. Liquid-proof all the way down over the knuckles, making them suitable for e.g. cleaning and wet/oily work. Extremely durable dipping. In conformity with: EN388:2016 4.X.4.3.F
Thermal insulating glove with PVC dots on palm. Glove made of Thermalite fibres.
Ultra thin insulating gloves for electricians made of 100% natural rubber latex. Length 280mm. Arc Flash classe: APC1. REACH compliant.
This glove, made with the very latest Dyneema® Diamond Technology 2.0, provides unparalleled comfort combined with high cut resistance and high fingertip sensitivity, and this for tough work. This without using glass fiber! The patented foam nitrile coating provides a solid "oil grip" and is extremely durable so that it can be worn longer in abrasive applications. The glove also offers short-term protection against contact heat up to 100 ° C. The cooling effect of the fiber provides the necessary comfort during the entire working day! Intrinsically one of the most cut resistant fibers available at the moment !! Available sizes: 7-12. Conforms to EN388: 2016: 4.X.4.3.D and EN407: X1XXXX
Strong nitrile gloves with standard grip and extra inner layer for optimal chemical protection. Excellent comfort. Anti-slip lining for better grip on oiled or greased objects, good abrasion resistance. Hypo- allergenic.
AlphaTec® Butyl (former Chemtek) gloves offer superior protection against aldehydes, ketones and esters as well as cencentrated mineral acids. The gloves are surprisingly flexible and provide excellent dexterity, they offer easy donning and good grip. The absence of latex proteins means there is no risk of latex allergies.
Welding gloves made of grey cowgrain leather with 15 cm protective cuff and cowsplit leather backing. Safe seam reinforcement around the fingers. Sizes: 10.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 1: operating voltage 7,500V, test voltage 10,000V, special properties R (acids, oil, ozone) and C (low temperatures). Length 41 cm. Supplied with 1 pair of over-gloves.
High quality cow grain leather glove (beige) with pistol reinforcement on the palm in cow split leather. If you need a solid glove with very good grip, this is the ideal solution! The glove is fully lined with a very comfortable cotton lining and has an extra long rubberized cuff of 10 cm for better protection of the forearm. The glove reaches outstanding mechanical results and is available in a lot of sizes. Sizes available: 8-12. The gloves are designed to use in the construction sector, transport and distribution. Conform: EN388: 4.2.4.4
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing.Sizes: 8-11. Thickness: 1mm, Lenght: 280mm Certified for resis tance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C) Class 00 Yellow offers arc flash protection Class 1 in accordance with the EN 61482-1-2²
Very thin and light glove, 15 gauge. The INTERCEPT™ yarn provides high cut protection while providing dexterity and comfort. The nitrile palm coating design improves grip, extends glove life in abrasive conditions and allows the hand to breathe. The glove is silicone free which prevents the transfer of silicone contaminants to metal parts prior to painting. The Oeko-Tex certification guarantees that the glove does not contain any harmful substances such as DMF and other chemicals.Fiber glass free, latex free, antisttic, food approved and machine washable at40°C. Sizes: 5-12.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 27 cm.
For maintenance and repair of electrical installations. In siliconised calf leather (palm). 100% Kevlar® tricot interlock (back). Protection against thermal and mechanical hazards. Tested with 7kA / 0.5 s ARC test
The Kingsplit is a new RP glove made of heavy cowsplit leather, with split leather palm reinforcement. The gloves are lined and have a rubber reinforced cuff (10cm), elastic in the back and protection at the knuckles.
Goat leather welding glove, unlined. Good finger sensitivity. Split leather cuff with Kevlar seams. Length 31 cm. Sizes: 7-11.
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff. Attractive, highly visible look with yellow and b lue stripes. Available in: yellow/blue.
Seamless liner of cotton/polyester, roughened green latex coating on palm and fingertips.
Glove made of green grain leather and aramid thread for protection from cut wounds. With 2-hand protection against chain saws.
All-round white glove for catering operations. Mechanically strong, heat resistant and impervious for ovens, dishwashers, autoclaves, cooking activities. Nitrile glove of 45 cm with a cut resistant insert and brushed finish on the fingers. Sizes: 7 (outer size:9), 9 (outerr size: 11) and 10 (outer size 12).
Gloves in soft jersey lining with natural rubber coating. Comfortable, smooth latex for excellent grip on wet and smooth items. Also insulates against cold.
Sturdy gloves in 100% nitrile with rolled edging. Fully powder free. Antistatic and silicone free. Food approved. Length 40 cm, thickness 0.12 mm. Sizes: 5.5 - 6 / 6.5 - 7 / 7.5 - 8 / 8.5 - 9 / 9.5 - 10 / 10.5 - 11.
Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Fully coated PVC/NBR, water, and oil resistant, with chemical protection. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Sizes: 7-12. Conform: EN388:2016 4.X.3.1.C.P, EN407: X.2.X.X.X.X, EN ISO 374-1:2016 Type B: AJKL
White gloves made of heavy cotton with elastic (tricot) at the wrist. Sensitect gloves have a perfect fit, and are ergonomic and extremely comfortable due to the Interlock quality. Can be worn either as a liner glove or for product protection.
Superior quality gloves in cowsplit leather, made with Kevlar® fibres for longer service life. The gloves have extra palm, thumb and index finger reinforcement and a 10 cm protective cuff. Available in: green/white. Size: 10, 11, 12.
Chain mail glove made of 100% stainless steel. The closure at the wrist is made with a polyurethane band and press-stud for optimal hygiene and comfort. Reversable and maximum protection against cutting injuries. The wrist band has a different colour for each size.
White gloves made of heavy cotton. Sensitect gloves have a perfect fit,and are ergonomic and extremely comfortable due to the Interlockquality. Can be worn either as a liner glove or for product protection.
Natural latex glove, good grip, lined inner, freedom of movement: excellent comfort thanks to the textile inner (seamless work surface), very high tear resistance, very good resistance to various acids and ketones. Applications: Chicken breeding, vegetable cultivation, perfume production, polyester lining, masonry work, and ink and dye production. Length: 31 to 33 cm (depending on size). Thickness: 1.15 mm. Sizes: 5-10.
Sturdy gloves in 100% black nitrile with rolled edging. Fully powder free. Length 240 mm, thickness 0.12 mm. Sizes: 5.5-6 / 6.5 -7 / 7.5-8 / 8.5 - 9 / 9.5 - 10.
Glove with full nitrile coating on low-lint seamless knit polyester/nylon liner. Glove with high sensitivity and good grip thanks to the rough finish.
Blue knitted food approved glove from the Revillet range (per piece) in polyethylene, polyamide, stainless steel fiber with long knitted cuff, does not contian glasfibre. This glove has excellent cut resistance, tested according to TDM standard (ISO 13997 TDM: 62,80 Newton). Treated to be permanent hydrophobic. Prewashed, to make sure it will keep its form after nex washing cycles. Washable. Sizes: 6-11. Size 5,12 and 13 on demand.
Extra thin (18gg) cut resistant glove that keeps the user cool all day long. High dexterity, nitrile coating on the palm and fingers. Approved for use in contact heat up to 100°C (15sec) with reinforced thumb grip and touch screen compatible. Sizes: 6-12. Complies with: EN388:2016 4.X.4.3.C, EN407 X.1.X.X.X.X
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff and palm reinforcement. Attractive, highly visible look with yellow and blue stripes. Available in: yellow/blue.
Glove made of cut-resistant HDPE material with PU coating. Very finger sensitive. Sizes: 6-11.
Thin airy working or inner glove, tight knit in cotton and spandex. Tight fit. Sizes: 6-10.
High-quality heat resistant glove in Kevlar and leather. Wool lining, cuff length 13 cm. Suitable for contact heat up to 350°C for 15 sec.
Thin (15GG) and comfortable work glove made from merino wool to keep your hands warm, suitable as an inner glove in cold environments. Touchscreen and food approved. Sizes: 6-11.
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P
Superb protection against cuts and abrasion, successor of Hyflex 11-630
Electro gloves MUST be stored out of sunlight and must NOT be folded. Due to the dimensions (250x500x100 mm) this case can be used for Class 0 upto Class 4 gloves, even in length 41 cm. New design with transparent cover (with UV filtration), can be fixed to a wall as well as transported by hand because of the retractable handle. Comes with a 100ml Luzenac talc container. The talc is recommended to increase comfort in use of insulating rubber gloves, it also makes them easier to done and doff.No PPE.
Gloves with five fingers, American cut. Palm, fingers and inside of thumb are made of para-amide coated interlock.. The gloves are fully lined with an acrylic/cotton felt. Elastic cuffs, finished with bias binding. The seams are stitched with a para-amide thread, overall length is 50 cm.
Ultra-thin (21gg) and airy glove that feels like 2nd skin, for precision work.
A versatile antistatic and latex-free glove with superior cut-resistance and mobility. The exclusive Intercept lining of the glove ensures maximum safety and productivity. The glove has optimal fit and flexibility due to the elasticity of the lining and the elasticity of the coating in nitrile foam. This coating has a breathable character to keep the glove comfortable throughout the day. The Hyflex CR is resistant to heat and scattered molten particle and can therefore be used in various work conditions. Suitable for manipulation and assembly applications in metallurgy, the automotive industry (press department, body department and welding department), the glass industry, the plastics sector. Length 240 mm.
Seamless glove with nitrile 3/4 coating. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing.Sizes: 8-11. Thickness: 2,3mm, Lenght: 360mm Certified category R/C. ATPV/ 14 cal/cm²
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. Oeko-Tex standard 100. DMF free, with impact protection on the back of the hand. Sizes 6 - 11.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With extra long cuff. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.
Seamless lightweight, 100% waterproof and windproof glove that is very finger-sensitive and gives you maximum dexterity. Laminated membrane technology for great protection against rain and moderate cold. This glove is characterised by its 3-layer construction with lamination technology, perfect and tight fit, very durable knitted nylon outer layer, fitted with waterproof PU membrane, ultra-thin and breathable ,Merino wool lining with moisture wicking anti-bacterial action and silicone MoG print on the fingers and palm for good grip. Sizes: S (7/8) - M (8/9) - L (9/10) - XL (10/11).
The AlphaTec® AquaDri® is made up of two layers to keep your hands dry and to improve comfort and performance. The soft foam coating inside with the Aquadri® technology developed by Ansell offers unrivalled moisture absorption. The superior nitrile film offers advanced chemical protection against accidental exposure to bases, oils, fuels, some solvents, fats and animal fats. The inverted diamond relief on the palm increases the grip on wet and dry objects for an optimum, firm grip in a wet or dry working environment.Antistatic, silicone free and food approved. Sizes: 7-11. Lenght: 38 cm.
Lined winter glove with fleece lining and PU palm. Safety cuff. Fully lined. Sizes 8-11.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 305 mm.
Blue knitted food approved hydrofobe glove from the Revillet range (per piece) in polypropylen, polyester, stainless steel and glass fiber with knitted cuff. This glove has excellent cut resistance, tested according to TDM standard. Prewashed, to make sure it will keep its form after nex washing cycles. Washable and waterrepelant. Sizes: 6-11. Size 5,12 and 13 on demand.
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s PU coating provides good grip. 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level D, approved for contact heat up to 100°C (15 sec), ESD and Touchscreen compatible. Sizes: 6-12.
PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.
Powder-free nitrile gloves for single use. Fingertips with relief. Light blue colour. Lenght 30 cm, thickness 0.11 mm.
A flexible glove with cutting, perforation and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and fingertips from needles and other sharp objects. Knitted in cut-resistant HDPE fibre, giving the whole glove protection level 5. Provided with PU coating from fingertips to over knuckles and therefore suitable for cleaning or working in wet conditions. Extremely wear-resistant coating. Sizes: 8-11.
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility, brought together in a winter glove.
Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10
Gloves with a supple neoprene coating. The knit cotton lining provides excellent perspiration absorption. Good grip in damp conditions. Antistatic Sizes: 8 / 9 / 10, length: 30 cm. Antistatic.
Talcum powder for electro gloves. Helps when pulling on gloves and absorbs transpiration. No PPE.
Seemless knitted nylon/spandex gloves (18 gauge) with foamy insulating layer nitrile on the palm. Ultra-thin ergonomic design provides extreme tactility to handle small parts easily. It is dermatologically tested and solvent-free and is Oekotex certified for no harmfull substances. Fortix™ Technology delivers extended wear time. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Sizes: 6-11.
Black powder-free disposable glove made of soft nitrile with extended cuff for extra protection of the wrist and forearm. Fully embossed for a reliable and consistent grip. Silicone and latex free and antistatic. The black color makes it easy to see if the hands have come into contact with potentially dangerous powders. The glove has been tested for phentalyl and stomach acid (vomit), simulating a dangerous overdose from practice. Suitable for use in the food industry. Length: 300mm, palm thickness: 0.14mm, finger thickness: 0.17mm. Sizes: (S) 6.5/7 - (XXL) 10.5/11. Complies with: EN ISO 374-1:2016 Type B: JKPT, EN ISO 374-5:2016 Virus, EN421
Glove with flexible nylon carrier and nitrile foam coating with anti slip design. Glove is very pleasant to wear and thus provides increased comfort. Excellent grip in oily conditions thanks to the foam nitrile coating with anti-slip design. Available in sizes 6, 7, 8 and 9. In line with EN388 3.1.2.1.
Seemles knitted nylon-spandex gloves (15 gauge) with insulating layer foam nitrile on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Biodegradable single use glove, powder free.
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
Gloves for all lengthy work activities involving chemicals, heat or cold. Neoprene on a double cotton liner. Temp-Tec 332 can be used for the manipulation of oiled, hot parts up to 250 °C. Available in: blue/black. Sizes: 8 / 9 / 10, length: 35.5 cm.
Comfortable gloves made of piggrain leather, backed with green cotton. Excellent wearing comfort thanks to ergonomically preformed fingers. Sizes: 9 / 10, with 10 cm protective cuff. Available in: leather/green.
