BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Durable, heat resistant Kevlar glove with heavy coton liner, 35 cm long. Cut resistant and isolating till 250°C.
Glove with flexible nylon carrier and nitrile foam coating with anti slip design. Glove is very pleasant to wear and thus provides increased comfort. Excellent grip in oily conditions thanks to the foam nitrile coating with anti-slip design. Available in sizes 6, 7, 8 and 9. In line with EN388 3.1.2.1.
The new generation of working gloves offering maximum grip with maximum impact protection. Abrasion resistant nitrile foam coating provides exceptional grip in dry environments as well when working when ther is water, grease and oil contact. Lightweight and breathable seamless liner (13 gauge) with Hook <(>&<)> Loop strap for secure fit all day long. Sizes: 7(S) - 12(3XL).
5-finger glove with palm in split leather and aluminized back. Wool lining. Kevlar seams. Glove for contact with heat up to 250°C. Length 40 cm.
The ActivArmr® 97-120 delivers the best of both worlds on safety and comfort, thus fulfilling the needs of workers who work in challenging conditions. The excellent mud and oil grip coupled with cutting resistance and impact damping offer hand protection in extreme environments, reduce fatigue and promote productivity. Special technology that makes the glove impermeable to oil keeps your hands clean and dry. Due to the striking colour, users' hands are more visible for greater safety.
Seemles knitted nylon-spandex gloves (15 gauge) with insulating layer foam nitrile on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 10,000 volts, operating voltage of 7500 volts. Length 41 cm, Sizes: 7-12.
Guide 6402 CPN offers a unique combination of maximum protection against needlesticks and cuts while maintaining flexibility and comfort. This model is the latest innnovation with needle and cut protection in the palm area. Kevlar in dark gray for heat resistance and cut protection is used on the back of the hand. Suitable for police and security forces when there are risks of cut, puncture and needle injuries. Great grip and tactile feeling. Sizes: 7-12.
Seamless knitted glove in yellow high-viz cut resistant ATA® fibres, with double palm and finger coating in nitile Microfinish®. Excellent cutting resistance and good grip in dry, wet and oily condtions. Available in sizes 6, 7, 8, 9, 10 and 11.
Cut resistant arm guard, with unique design so that the sleeve stays in place at hand level and does not curl up. With extra elastic at the wrist. In 13 gauge HXFIBR fiber mixed with polyester and ealstan for a good fit. Suitable for use with food. ESD approved according to EN16350. Available in sizes M-XL.
Gloves designed for work in cold working conditions. The combination acrylic/cotton/polyester in the seamless liner combines a light weight with warmth and suppleness. The roughened latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: S / M / L / XL.
Economical solution for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless polyester lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Welding gloves made of grey nappa leather with protective cuff. The 15 cm protective cuff is also made of quality nappa leather and the fingers have reinforced seams. Available in: grey.
Waterproof, black gloves made of neoprene. Freedom of movement due to flock-lined cotton lining. Better grip due to non-slip finish. Good chemical resistance to acids and solvents.
This glove is specially designed to protect against liquid gases at very low temperatures. The Gore-Tex membrane ensures water-tightness. American assembly. The cowhide leather is oil and water repellent and heat resistant. The glove has a 20 cm long cap-cuff and is lined in wool.
Lined finger-sensitive nitrile cap gloves with a grip coating according to the new Grip Technology. Very good physical properties and good grip even in oily and damp/wet conditions. Top finished with straight edging. Sizes: 8 / 9 / 10, Length: 280 mm.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 40 cm.
The full nitrile coating repels oil and liquids keeping hands dry and protected, whilst the new micropore nitrile palm coating ensures excellent grip in both dry and oily conditions. Conform EN3 88: 2016 level E cut resistance in such a fine touch, lightweight glove is unrivalled in the market place. Available sizes: 6-11.
Cut resistant glove, Nitrile, Palm-dipped, CRF® Technology, Glass fibre thread, Nylon, Polyester, Spandex, 13 gg, Foam grip pattern, Cut resistance level 5, Cat. II, Black, Water and oil repellent palm, for fine assembly work. EN 388:2003, 4544
A warm and durable glove in our Freez range, well suited for cold environment work and freezer. The Guide GTX - Armor reinforcements in palm, fingertips, thumb and indexfinger makes the glove really durable. The elastic at wrist and the lined part towards the knitted cuff prevents cold air from entering the glove. The extra lining on back of hand gives this glove an exellent cold protection. Touchscreen at fingertips back of hand. Size 7-12.
Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.
Cold insulating glove with foam insulation and PVC coating. The roughened finish provides excellent abrasion resistance. This fluore scent, supple and ergonomically shaped model features a protective cap and is completely impervious to liquids. It is also dirty, fat and water repellent. Ideal in the chemical and petroleum industry and for work in cold stores, ports, public services or other env ironments where protection against cold is required. Anitstatic. Length: 27.5 cm.
Very supple, black fireman's gloves, 100% leather with lining of interlock Kevlar® and cotton. Leather wrist protection with Velcro closure and 15 cm long cuff of supple cowsplit leather. Water repellent and heat resistant. Available in: black. Sizes: 8 / 9 / 10 / 11 / 12, length 35 cm, cuff 15 cm.
Cut resistant gloves knit from Zirnium® thread, length 25 cm.
Heat resistant glove Polysafe in Kevlar with water- and vapourproof nitril underglove. The Polysafe Multi keeps his isolating capacity until 350°C. Sizes: universal, 33 cm length.
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Polyethyleen/composite yarns knitted glove with double nitrile coating. First orange coating liquid proof full dipped. Second palm coating in black nitrile foam. Sizes: 6-11.
High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 350°C for 15 sec.
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Goat leather gloves of super quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver (super quality) and Driver EC (standard quality).
resistant to 250°C. Perfectly cut resistant so ideal for commercial kitchens, processing hot items and in all industries which present cutting and heat risks.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.
- Chemical protection - Triple PVC coating - Very finger sensitive - Seemless knitted cotton liner 13 gauge - Sizes: 8-11 - Length: 30cm - EN388:2016 4.1.2.1.X - EN ISO 374-1:2016 Type B: AJK - EN ISO 374-5:2016
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility.
Exceptional chemical protection gloves with tight fit for medium-duty and precision work. A two-layer liquid-proof nitrile coating with Guide XLNT™ technology ensures superior grip in both oily and dry envi ronments. Superb moisture management and an outstanding barrier against liquids and chemicals. The 18-gauge nylon liner provides high fingertip sensitivity in tough environments.
Nitrile glove with a sand grain finish on palm for a better grip. Version without lining, so the glove is ideal for production envir onments that are sensitive to external impurities. This glove is 33 cm long and 0.38 mm thick. Food approved.
Flexible glove in unthoughened vulcanised rubber. Test voltage 30.000 volt, use voltage 26.500 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. In line with EN 60903 class 0 cat AZC.
Protection against a wide range of chemicals, acids, caustics, solvents, grease and oil. Constructed with a seamless knit liner (13 gauge) for maximum comfort and endurance. Lenght : 35,5 cm. Sizes: 8-11. In linde with: EN388:2016 3.X.4.3.E, EN ISO 374-1:2016 Type A: A.J.K.L.M.T, EN ISO 374-5:2016
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating provides a good grip. 15 gg liner and extra reinforcement along the thumb and index finger. Cut protection level D, approved for contact heat up to 100°C for max.15 sec. Approved for ESD and food safe. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.D, EN407: X.1.X.X.X.X
Class 2 welding protection, elasticated cuffs for a secure fit, designed to be worn in a harsh working environment, designed with a comfortable fit, CE certified, this product is sold in pairs, UKCA marked. Outer fabric: split cowhide, thickness 1.3 mm Sizes: one size Standards: EN ISO 11611 Class 2 A1
Supple, wear resistant, silicon-free gloves made of nitrile coated gel foam with lining of knit cotton and rubber inner layer to dampen vibrations. Reduces susceptibility to hand-arm vibration syndrome (HAVS) during industrial activities to an absolute minimum. With Velcro closure.
Excellent tactility, the perfect solution in situations involving chemical risks thanks to combination of neoprene and natural latex. These unlined neoprene gloves are natural latex on the inside, flock-lined with cotton and have a standard profile.
Blue powder-free nitrile glove with rolled edge for applications in food industry. Completely latex free. Sizes: 6.5-7 to 9.5-10. Length: 24 cm. Thickness: 0,08mm. Package: per 100 gloves! Food approved.
Glove with PE and Zirnium. Extremely good cut resistance.
60 cm cut and heat resistant arm protector. Contact heat to 100°C for max . 15 seconds. With thumb hole and Velcro closure on upper arm.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Length 41 cm, Sizes: 7-12.
Lined winter glove with reinforcments in PU palm. Wind-and waterproof membrane makes sure that hands stay dry and warm. Glove has touch screen on the thumb and velcro strap at the wrist. Protects up to -10°C. Sizes 8-12.
Strong, ambidextrous blue knitted (13 gauge) gloves made of Intercept Technology® that delivers the highest cut protection level F throughout entire glove and cuff, even after laundering. More durable and stain masking designed for extende use life. Suitable for food processing and services.
Blue split leather glove, winter lined with Scotchgard leather reinforcements in the palm. Thumb and forefinger tips are touchscreen compatible. Protects against temperatures up to -30°C (slightly wet or dry environments). Sizes: 7-11.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and supple model (18 gauge) has a double coated palm for total liquid protection. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and touchscreen function. Sizes: 7-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Flexible, well-fitting work glove made of Guide HXFIBR™ fibers (13gg) that combine very good cut protection with dexterity. The liquid-tight nitrile coating of the glove ensures for protection against liquids in the palm and protects the knuckles on the top. Touchscreen function and extra reinforcement on the thumb and index finger. Approved for contact heat up to 100°C (15sec.) and suitable for contact with all types of food. Sizes: 7-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X.
Heat resistant Kermel mitt with double lined cotton fabric. Kevlar® reinforced at the thumb. Split leather 13 cm cuff made with Kevlar® fibres. Contact heat to max. 500 °C.
Fluid-tight glove in jersey with neoprene coating, 30.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. The extra insulation layer makes the glove ideal for working for short periods with hot liquids at up to 180°C or in a cold environment up to -25°C. A popular model for the petroleum industry, for waste treatment and for the transportation and treatment of hazardous substances! Siliocne free.
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
Very durable and super comfortable glove, seamlessly knitted in a nylon fabric with a double nitrile coating. Glove is fully coated for applications involving a lot of oil or water. The glove provides excellent grip.
Durable anti-cut quality leather welding gloves in cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 8-9-10-11.Length cuf: 15 cm.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The nitrile coating in the palm provides excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 5-11. Complies with: EN388:2016 4.X.4.3.C, EN407: X.1.X.X.X.X
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The glove is fully coated with a double coating layer in the palm, for adequate protection against liquids and oils. Approved for contact with all types of food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
Chemical glove for precision and medium duty work in cold conditions. Dipped in a two-layer liquid proof NBR/PVC blend. 35 cm long safety cuff. 18gg nylon liner combined with an acrylic winter lining for cold environments. Sizes: EN388:2016 4.1.4.1.X, EN511: 0.2.1, EN407: X.2.X.X.X.X, EN ISO 374-1:2016 Type A: JKLMNOPT, EN ISO 374-5:2016 Virus
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
Welding glove made of high-quality split cowhide leather with cotton lining and heat-resistant Kevlar seams.
Seamless knitted cotton, NO PPE
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 10,000 volts, operating voltage of 7,500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
