BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Stretchy glove, seamlessly knitted with blue Dacron fibres.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
Good level of abrasion resistance <(>&<)> grip, but also high sensitivity in dry to slightly oily conditions.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 20,000 volts, operating voltage of 17,000 volts. Length 41 cm, Sizes: 7-12.
Robust glove with a thin lining in PVC type 690: Long sleeve model (60 cm), thermally attached with elastic end, made with an air vent. Suitable for immersion, disinfection, cleaning of sewers, deep sea fishing.
Seamless knitted cotton, No PPE 400gr/12pair
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 356mm. Breedte: 35,56cm.
PVC/nitrile gloves with cotton lining for very good sweat absorption. These Fortex Pro gloves provide excellent resistance to chemicals, high tactility and a very good grip thanks to the roughened palm. Length: 35 cm.
Sustainable glove with a natural latex coating. The liner consists of 44% recycled material, namely 25% recycled polyester and 19% recycled cotton. The roughened latex coating provides a firm grip and good abrasion resistance. Versatile because the liner also offers a limited degree of cut resistance. (class B) and offers good short protection against thermal risks (up to 250 ° C). Possible applications: general maintenance, construction and logistics, green service. Conforms: EN388: 2016: 3.1.4.2.B, EN407: X2XXXX. Available sizes: 8-11.
Budget-friendly glove with black PU coating, large size range.
Goat leather gloves of standard quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver EC (standard quality) and Driver (super quality).
Gloves with a yellow nitrile layer on interlock lining. Coated palm, open back, tricot cuff. Good grip and abrasion resistance. Ideal for light work and in warm environments.
Glove with PE and Zirnium with PU coating and reinforcement in split leather on palm, index finger and thumb. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 7 / 8 / 9 / 10 / 11.
Glove with palm in goat leather.Back and cuff in cotton. Kevlar liner in the palm. Protects against heat from sparks.Sizes : 8/9/10/11
Knitted cut resistant glove (long cuff 13 cm) with a new foam nitrile coating with touch screen functionality. The lining consists of high cut-resistant PE fibers, nylon and Spandex. The nitrile coating (on the palm) provides an extremely good grip on dry, but also on wet and oiled surfaces. Very comfortable and excellent protection against abrasion and with an extra reinforcement between thumb and index finger. Also provides protection against contact heat up to 100 ° C. Application: glass industry, metal assembly, injection molding of plastics. Available sizes: 7-12. Conforms to: EN388: 4.X.4.3.D and EN407: X.1.X.X.X.X.
Sturdy puncture resistant glove with 8 layers of metal fabric in the palm and 4 layers on the underside of the fingers and over the fingertips. The top of the fingers and knuckles are also reinforced.
Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.
Chemical resistant glove, blue colour, thickness 0.45 mm, length 30 cm. Made of flocked natural rubber, 100% latex. Suitable for automotive assembly, light assembly, chemical industry, refineries, pharmaceutical industry, cleaning and maintenance. Sizes: 6,5/7-9,5-10.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 2500 volts, operating voltage of 500 volts. Length 36 cm, Sizes: 6-12.
Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Thumb and forefinger reinforced, double stitched, precurved fingers, the palm has a striking red color. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Touchscreen function on the forefinger. Sizes: 7-12. Conform: EN388:2016 3.X.4.2.D.P, EN407: X.1.X.X.X.X
Economical solution for light applications where a durable coating and firm grip is required for working in greasy conditions. The double-layer nitrile coating with a roughened finish keeps hands dry and comfortable, and provides a good grip. Fully coated glove on 13 gauge polyester liner. Sizes: 6-11. Conforms to: EN388: 2016 4.1.2.1.A
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
The latex coated glove with steel, fiberglass, Kevlar lining and extra long knit cuff is the practical solution for a safe way to manipulate glass, metal and plastic. She is distinguished by an exceptional cut resistance, excellent overall mechanical performance and superior comfort. In wet or dry conditions, this glove an excellent grip thanks to the coating on the palm of natural rubber. The PowerFlex ® 80-658 is a unique glove on a highly efficient way to adequately protect combines with natural dexterity.
Composite gloves with dielectric properties coated with natural latex, with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 2: operating voltage 17,000V, test voltage 20,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Sizes: 8-11. In line with EN 60903.
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 180 °C. Silicone Free.These gloves are suitable for: handling hot glass, rubber tyres, belts and removal of forms from injection moulding machines, vulcanising, calendering, removing thermoplastics from moulds, handling hot moulded materials, handling hot wooden sheets, removing sterilised products from autoclaves. glass industry, rubber industry. Sizes: 8/9/10. length: 33 cm. In line with: EN388:2016 2.2.4.1.B, EN 407 X.2.X.X.X.X.
Gloves with chemically resistant coating consisting of five layers, with hypo-allergenic lining. Can also be used as liner gloves. Extremely supple and ergonomically formed model based on patented seam technology. Offers protection against an exceptionally wide range of chemical products and solvents.
Thicker than our average latex glove. The fingertips are thicker than most standard latex gloves for ultimate protection. The enhanced fingertips with relief allow for a sure, reliable grip in demanding work environments, while increasing mobility for more productivity. Regardless of whether the tasks to be performed are moderate or heavy-duty or whether you are working in a dry or wet environment, your hands will always stay safe and dry.
Supple latex gloves with rolled cuff to prevent leakage in wet conditions.
The ever popular medium weight cut level E 50 range is evolving into upgraded equivalent styles with higher specification providing incredible level F cut protection to EN388:2016. EN388: 2016 maximum level F cut resistance; Rhino Yarn™ cut resistant technology; EN388: 2016 4 × 4 2 F; High level of abrasion resistance; Dry PU palm coating provides secure grip; Dark colour liner hides dirt, extending life of the glove; Reinforced thumb crotch with nitrile patch.
Ideal for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF-free.
The new INTERCEPT™ fibre offers unrivalled cutting protection and more comfort and mobility. The coated palm design gives the user more grip, prolongs the life of the glove during abrasive work and allows the back of the hand to breathe. The silicone-free PU coating does not hinder processing of painted metal parts. The grey coating camouflages dirt when working in polluted environments.
Black Zirnium yarns knitted glove with black nitrile foam coating in the palm. Excellent cut resistance and dexterity and very good grip in oily conditions Sizes: 7-11.
Chain mail glove made of 100% stainless steel. Adjustable closure around the wrist, also 100% stainless steel. Chain mail offers maximum protection against cutting risks. The glove is ambidextrous. A coloured identification tag on the wrist band indicates the size. Sizes: XXS (brown) / XS (green) / S (white) / M (red) / L (blue) / XL (yellow).
This glove combines tough protection with natural comfort. The Intercept™ Cut Resistance Technology provides extreme cut protection, the liner made with water-based polyurethane/nitrile provides enhanced comfort and dexterity, it is solvent free and OekoTex 100 certified. The Fortix technology provides extended use with up to 4x the durability in the thumb crotch region versus the standard glove without thumb crotch reinforcements. Latex and silicone free. Sizes: 6-11.
Thin, flexible work glove – part of our ENVI sustainable products series. ENVI gloves are manufactured using less energy and/or less water consumption. They are also DMF, butadiene and silicon-free. 3304 has a 15 gg liner made of glycose/glycerol starch and small amount of nylon for a more sustainable choice and exceptional moisture management. Approved for contact heat level 1 and Oeko-Tex certified. Premium nitrile palm dipped. Touchscreen.
Lined working glove in synthetic leather. With open cuff, very thin. Sizes 7-11.
Very durable gloves for all extended tasks in cold conditions. Double nitrile coating on insulating lining.
Yellow, soft and comfortable 30 cm gloves in unlined flocked natural latex. Thickness 0.45 mm. Good chemical resistance. Suitable for food processing, agriculture, automotive assembly, chemical industry, pharmaceutical industry.
Glove in butyl rubber, unlined, length 35 cm, thickness 0.5 mm. Colour: black. Flexible and comfortable, protects against a wide range of chemical products, detergents and solvents, liquid-tight. With roughened palm for better grip. Silicone-free and antistatic. Sizes: 7-10. Suitable for chemical, petroleum and paint industry, transport and handling of hazardous products.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam in the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. Oekotex certified.
Cut resistant 5-finger glove with palm and back in water repellent cowsplit leather. Inner lining reinforce with knitted TEKINOX®. 15cm cotton protective cuff with extra wrist protection and seams in para-aramid. Total lenght: 35 cm. Sizes: 7-11. Suitable for : metal and glass industry, heavy industrial activities. In line with. EN388:2016: 4.X.4.4.F
Light elastic glove made of white Dacron fibres. These hollow fibres insulate perfectly, provide a lot of warmth and ensure rapid drainage of perspiration, which keeps body temperature in check. Pro Food Thermastat protects against cold and can be worn as a glove and lining. Suitable for operations with dry or chilled and frozen foods, meat, fish, ... in cold conditions.
Seamless knitted Kevlar glove, with palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish.
The thermal acrylic lining provides excellent thermal insulation so work is more comfortable. Excellent thermal insulation. Soft, non-fluffy. Very absorbent to maintain dry hands. Ideal as a liner under unlined over-gloves. Sizes: 7 and 9.
Cold and chemical resistant glove on coton liner. Full PVC coated with extra coating on the entire hand, rough finish. Sizes: M-XL.
Cut-resistant glove with HXFIBR fiber (18 gauge) with PU coating. Very finger sensitive. reinforcement between thumb and forefinger. Thight fit and flexible cuff, without glas fibre. ESD, touchscreen function. Free of DMF, silicone and natural latex. Oeko-Tex standard 100. Sizes: 6-12. In line ith: EN388:2016 4.X.4.2.C, EN407: X.1.X.X.X.X.
Driver extra gloves are very light, supple and durable. This glove is extremely comfortable and has a perfect fit. The top-quality sheep skin leather also provides very good tactility.
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 254mm.
Chemical resistant glove with multiple barriers. Innovative multi-layer polymer design with nitrile-neoprene-nitrile layers. Provides protection against a variety of chemicals from acids to bases to hydrocarbons and organic solvents. Featuring the latest Michrochem chemical barrier technology for superior protection in hazardous conditions. Inside of soft nylon lining for comfort and extra mechanical protection. Oeko-Tex standard 100- approved. Permeation time> 30 minutes for 13 of the 18 chemicals listed in EN ISO 374: 2016. Antistatic, latex and silicone free. Length: 35 cm, thickness 0.38 mm. Sizes: 6-11. Conforms: EN388: 2016 3.1.2.1.A, EN407: X.1.X.X.X.X, EN ISO 374-1: 2016 Type A: ACFGJKLMNOPST, EN ISO 374-5:2016
Trilite disposable glove (latex, neoprene, nitrile) with chlorinated inner and outer, and roughened fingertips. Length: 25.5 cm. Thickness: 0.15mm. Sizes: 6-9.
Blue microporous cryogenic SAFEGRIP glove lined with wool. Guard of 15cm in leather. Equipped with a Velcro closure at cuff. Thickness: 1mm. Length: 40cm.
Thin unlined welding glove made of soft and durable goatskin with Kevlar seams, REACH compatible.
Glove made from renewable raw materials: natural bamboo fibres, with flexible coating that ensures high sensitivity, comfort and effective grip. This glove adapts exactly to each individual shape of the hand after 3 to 5 minutes. Exceeds REACH regulations. CO² neutral production in Germany, short supply chain.
Gloves with blue nitrile layer on a jersey lining. Palm coating and safety cuff. Excellent abrasion and cut resistance, very good grip when working with oil and greases. Flexible, comfortable and ideal for use in automotive, construction and metal working industries. Application: heavy working conditions. Sizes: 8-10.
The neoprene coated glove with Kevlar. Materials used in the glove are inherently flame resistant, even after washing. Arc Flash Hazard/Risk Category 2: helps protect workers against arc flash hazards.
Synthetic leather glove, Winter-lined, 0,7 mm, Synthetic leather, Polyester, Fleece, Cat. II, Black, green, Chrome free, Waterproof, Winter-lined, Velcro®, for precision work. EN 388:2003, 1121 EN 511:2006, 11X
Very comfortable high cut resistant (cut class E) glove with a gray PU coating. Highest dexterity (18 gauge). Ideal for dry applications in disassembly, handling of objects with sharp edges. Touch screen functionality. According to EN388: 4.X.4.2.E
Gloves with supple neoprene coating. The knit cotton lining provides excellent perspiration absorption. Antistatic.Good grip in damp conditions.
Thin work glove with a microporous nitrile foam coated palm. This ensures a very good dry grip and protects against moisture. Oeko-Tex approved. Resistant to contact heat up to 250°C (for 15s). Sizes 5-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.2.X.X.X.X
High Cut resistant glove with Nitrile Coating * High dexterity / 18 gauge * Reinforecement between thumb and index finger * Touch Screen functional * Made from black Kevlar * Highest cut resistant class F * Short protection against contact heat up to 100°C
Dark green disposable gloves in nitrile. The profile guarantees excellent grip in dry or humid conditions. Un-powdered. Weight (size M): 6,0 g / Thickness: 0.12.-0,17mm). Applications: Light chemical applications in labs, assembly, product control, food sector. Tested for food contact (10/2011). Available sizes: S-XL.
Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.
Black 61 cm long latex glove in an extra thick version of 2.6 mm. Provides a rolled edge to protect against leaks in damp conditions. Suitable for maintenance services, public sector, sewerage work and industrial cleaning. Sizes: 7,5-10,5.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating ensures for a good grip. 13 gg liner and extra reinforcement along the thumb and index finger. Very high level of cut protection, approved for contact heat up to 100°C (15sec). Approved for ESD environments and food safe for all types of food. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
A supple glove with cut, puncture and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and the fingertips from needles and sharp objects. Knitted of HDPE cut-resistant fibre, which gives the whole glove cut protection level 5 according to EN 388. Liquid-proof all the way down over the knuckles, making them suitable for e.g. cleaning and wet/oily work. Extremely durable dipping. In conformity with: EN388:2016 4.X.4.3.F
Thermal insulating glove with PVC dots on palm. Glove made of Thermalite fibres.
Providing EN388: 2016 maximum level F cut resistance and abrasion resistance the 50-6121 has a breathable, sandy foam nitrile palm coating designed to deliver excellent grip, particularly in oily conditions. The thumb area has been reinforced with a nitrile patch to provide additional support and protection in a key high action area, extending the life of the glove. EN388: 2016 level E cut resistance; EN388: 2016 3 × 4 3 F; EN407: 2004 × 1 X X X X; Rhino Yarn™ cut resistant technology; High level of abrasion resistance and durability; Good oil and dry grip; Breathable open back and coating; Dark colour hides dirt, extending life of the glove; Reinforced thumb crotch with nitrile patch.
