BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
Extremely good fingertip sensitivity, extra flexible, perfect fit and extremely light glove. Seamless knitted white nylon (13 gauge) Suitable for light applications in dry circomstances. Sizes: 6-11. In line with EN388: 2.1.2.X
J-Energy series. High shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
High shoe in white microfiber, with a synthetic 200J toecap. Fitted with a synthetic liner. Outsole in PU/PU. Sizes: 35-42.
Softshell jacket for women in light stretch material. Two-tone front zip and side pockets. Adaptable sleeves with velcro closure and drawstrings at the hem at the bottom. Zippullers in contrasting color. Quality: 96% polyester, 4% elastane, brushed inside. Available sizes: XS - 2XL. Available colors: black, white, navy, dark gray, green, blue and red.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Comfortable padded tool belt for easy rig support. Thick, vented foam padding for comfort, double tongue metal roller buckle, grommets set firmly for durability, suspender anchors.
Intrinsically safe (Ex-proof) battery for SR 500 EX motor unit.
The Windproof BUFF offers the best protection against wind and cold, thanks to the insulating layer of warm air that forms between the skin and the fabric. The Gore Windstopper is a windproof and water-repellent fabric. Ideal for cold temperatures or with a strong wind. Quality: Windstopper material, recycled microfiber, elastane Available sizes: universal. Available colors: Fluo yellow / navy, navy and black.
Ergonomic mouse pad logilink.
Synthetic wipes, soaked in disinfectant liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
This jacket is equipped with knitted wind cuffs in the sleeves, two pockets on the inside and two pockets on the outside. The sleeves are removable and this jacket can be fitted with a hood. The breathable, water-repellent outer fabric and moisture-absorbing coating on the inside protect you from wet weather conditions. Available colors: Hi-Vis yellow/Navy and hi-vis orange/navy. Available sizes: S – 4XL.
This T-shirt from the Casual line has long sleeves and is washable at 60 degrees. The elastane provides a nice fit and a high wearing comfort. After washing you can easily dry the T-Shirt in the dryer. Available sizes: XS-5XL. Available colors: white, navy, red, royal blue, dark gray and black.
Shift work trousers with concealed zip, thigh pocket with concealed press stud fastening, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, Cordura® knee pockets, 1 back pocket with concealed press stud fastening, reflective piping, D-ring, extra insert at crotch to prevent tearing. Quality: 65% / 35% polyester / cotton, 2/1 twill weave, 245 gr / m². Available sizes: 44-66. Available colors: Navy / gray, black / gray, and charcoal gray. Compliant with: EN 14404.
Short-sleeved fabric jacket, 100% cotton, 250g / m². Available in white. No PPE.
Flame retardant and antistatic signaling fleece with arc protection. Upright collar; Zipper under flap with velcro fastener; 2 inset pockets with zipper; Rounded-in sleeves; Elastic in sleeve end; Elastic cord in hem. Quality: 54% Modacrylic + 34.2% FR cotton + 10% polyamide + 1.8% AST; ± 310 g / m². Available sizes: S-3XL. Available colors: Fluo yellow / navy. Compliant with: IEC 61482-2: 2009 class 1 - EBT 10.7 cal / cm², EN ISO 11612: 2008 / A1 B1 C2 F1, EN ISO 14116: 2008 / Index 3 / 25H / 40, EN ISO 20471: 2013 / Class 2, EN 14058: 2004 / Class 1 xxxx and EN 1149-5: 2008.
Aquafloat superior jacket 1MMV: Fully waterproof outer fabric + taped seams; Crutch strap for wearer's safety; Anti-flushing straps at arms; Front zip closure under double stormflap with touch <(>&<)> close fastening; 2 patched chest pockets with water repellent flaps + marine grade whistle; 1 Napoleon pocket under storm flap; 2 lower hip pockets with fleece handwarmer; Adjustable waist belt and elasticated back waist; Elasticated drawcord with toggles; Retro-reflective tape on hood, upper arms, wrists Inner adjustable neoprene wrist seals. Buoyancy: 54N (size L). Available sizes: S-3XL. Available colors: Navy/red.
The Merton rain jacket with fixed hood, two inset pockets and sleeve narrowing by press studs is made from a very supple but highly protective fabric. This flame retardant and anti-static jacket protects you from water penetrating but remains breathable at the same time making this jacket very comfortable to wear. Quality: 100% FR Polyester knitting with FR PU coating + AST; ± 240 g/m². Available sizes: S-3XL. Available colors: Navy.
Coverall Force+ with concealed press stud fastening, 2 inset side pockets, 2 thigh pockets with flap, 1 breast pocket with flap, 1 back pocket with flap, knee pockets, elastic in back, sleeves with adjustment press studs, reflective tape on shoulders, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS Available sizes: 44-66 Havep. Available colors: Blue / gray. Conform: EN 1149-5, EN 11611 class 1 A1 (front class 2), EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
The SR 200 full face mask is made of silicone and is produced in one size that will fit most face sizes. The mask is equipped with three inhalation valves and two exhalation valves, and the breathing resistance is therefore very low. The exhalation valve covers with baffles effectively protect the valves and membranes against dust and paint mist. The design and location of the exhalation valves improve the scope available for communicating. The material and pigments of the mask body are FDA- and BGA approved for exposure to provisions, which minimizes the risk of contact allergies. The easily adjustable elastic head harness of the mask is secured to the visor frame and to the exhalation valves which, together with a large crown plate, contributes towards a comfortable and secure fit. The spherical visor of the mask is made of scratch-resistant polycarbonate, which provides a large field of vision. The mask can be used either as a filtering device in combination with filters from the Sundström range of filters, or as breathing apparatus with a continuous air flow together with the SR 307 compressed air attachment. The SR 200 can also be used as head top together with th e Sundström fan unit SR 500 or SR 700. Holder for pre-filter is included. The SR 200 full face masks together with the SR 500 EX fan are approved for use in a potentially explosive atmosphere. Best stored in box SR 344 alternatively storage case SR 339-1 or SR 339-2.
Low shoe in waterresistant full grain leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a bre athable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/E-TPU Infinergy® extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 38-48.
Salvequick Plastic Plasters are convenient high-quality plasters. The plasters are allergy tested. They are easy to apply, flexible and convenient to use. CONTENT: Each refill contains 45 plasters (27 plasters measuring 72 x 19 mm and 18 plasters measuring 72 x 25 mm). 6 refills/box.
P3 filters with high-resistance shell, with bayonet connection for mask Medopair II. Offer excellent protection aginst solid and liquid particles such as dust, fumes, aerosols. In linet with: EN143
Comfortable and breathable overall with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 44-64.
Women's version of the T-shirt exactly 190 with long sleeves: - pre-shrunk material; - 1x1 rib-knit collar; - double thread stitched sleeves and bottom hem; - provided with side seams. Quality: 100% ring-spun jersey cotton, 185 g / m². Available sizes: XS-3XL.
The Corran is a trendy hi-vis sweater with segmented reflective tape that offers ARC protection. The bi-colour sweater is equipped with 2 side pockets with zip closure and has anti-microbial properties. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Fluo yellow/Navy. Complies with: IEC 61482-2 : 2018 APC1 - ATPV 14,8 cal/cm², EN ISO 11612 : 2015 / A1 B1 C1 F1, EN ISO 14116 : 2015 / IND.3, EN 1149-5 : 2018 and EN ISO 20471 : 2013 +A1 2016 / Class 2.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam/aqua PU in the palm with longer cuff. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Premium grain goatskin leather combined with cut and impact protection glove. TPR impact protection on top of the hand and the full lenght of the fingers. Additional palm leather layer enhances cut resistance. Reinforced seams on the index finger and base of thumb. Secure cuff closure with TPR tab closure. Sizes: 8-13.
Flame retardant, anti-static hi-vis bodywarmer Vikja: Straight collar; Zip closure under flap with touch <(>&<)> close fastening; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket. Quality: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluo orange/navy.
White clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 40-48.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Sandal in microfiber with a steel toe cap. Outsole in PU, including ESD. Antislip SRC and choc resistant.
Multinorm parka with arc protection: Straight collar; YKK zip closure under flap; 1 patched chest pocket; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket; Round sleeves; Flame retardant reflective tape. Quality: 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
This multinorm Dapro coverall is tough and comfortable. The coverall has an adjustable elastic at the waist for the perfect fit and a front closure with a welding proof flap construction. Available sizes: 44-70 NL. Available colors: Navy and royal blue
Multinorm winter parka with taped seams and quilted lining. Completely metal-free. Wind and waterproof. Quality: Cantex 240IR, twill PU-coated membrane, 260 g / m². Available colors: Fluo yellow / navy. Available sizes: XS-4XL. Conforms to: EN 1149, EN 13034, EN 343 4: 1, EN ISO 11611 class 1, EN ISO 20471 class 2, EN ISO 11612, IEC 61482 class 2.
Hi-vis parka bicolor: Waterproof, Breathable, Windproof and with reflective striping. Available sizes: XS-8XL. Available colors: fluorescent yellow / navy and fluorescent orange / navy. Conforms to: EN 343: 2003 Class 3: 1, EN ISO 20471: 2013 Class 2.
The 3M™ PELTOR™ LiteCom Plus headset is based on a robust basic design with a number of added features. This is a headset that is designed for demanding use on a daily basis. It lets you talk hands-free and work safely regardless of harmful noise levels. Active level-dependent filtering of ambient sound ensures you are not isolated from your immediate surroundings, but can still hear alarms, unexpected sounds and calls for help. SNR: 33dB. In accordance with: EN 352-6
Sandal S1P in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Flame retardant balaclava with high protection against Electric Arc in double tricot with ELIM: 22.0 cal/cm², EBT: 27.0 cal/cm², APC 2. 20% recycled cotton. Extra protection over the shoulders. Available size: Universal. Available color: Navy. Complies with: EN ISO 11612 A1B1C2F1 and EN 1149-5.
Fleece jacket with: • extra reinforcement on the shoulders, elbows and inside collar; • two side pockets with zip; • long 2-way zip with chin guard; • extended back; • cuffs with thumb loop. Quality: 100% polyester, 320 gr / m². Available sizes: XS-4XL. Available colors: red, navy, gray and black.
Light hearing protector made of a combination of plastic and stainless steel. Very light model with ergonomic design with sealing filled with fluid and foam.
Bicolor lady softshell jacket with detachable hood. Contrasting zipper on the front and on the side pockets. Adjustable sleeves with velcro closure. Drawstrings at the hood and at the bottom hem. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Zipper pullers in contrast color. Oeko-Tex 100 certified. Quality: 100% recycled polyester, 280 g/m². Available sizes: XS-2XL. Available colors: Blue/Navy, Navy/Blue, Black/Grey, Black/Red, Black/Orange and Gray/Black.
Harness to carry fan units SR500/SR700 on the back. No PPE.
High shoe in full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. PU/PU outsole. Removable, polyurethane insole with textile layer. Sizes: 36-47.
Sweater full zip bicolor seams: Long sleeve, Collar, Dryer resistant, Oeko-Tex®, American fleece, Cotton/Polyester, Bicolour, Sweaters, 60 °C, Construction, Transport <(>&<)> Logistics, Bicolour, 60°C washable Quality: 70% Cotton / 30% Polyester, 280 g/m². Available sizes: XS-5XL. Available colors: Navy/Royal Blue, Black/Orange and Black/Red.
Safety helmet with integrated face shield (class 2) made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap, neck and earflap protectio and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Insole for female; Available in different heights: Level 1 (wide), Level 2 (standard), Level 3 (small); Very good moisture absorption and release properties; wear-resistant; Suitable for all ESD-compatible safety shoes certified with this insole.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
Ladies jaacket Oyora with arc protection: Straight collar Closure with hidden press studs under flap 2 patched chest pockets with flap closed by concealed press studs 2 patched slanted pockets with flap closed by concealed press studs 2 loops for gas detectors Round sleeves Sleeve narrowing by press studs Extended back Double stiched (2x2) flame retardant reflective striping (50mm). Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g/m²Available colors: Navy. Available sizes: 36-56.
Bicolor Hi-vis t-shirt comfort S280: Moisture-wicking and breathable material; Reflective striping; Taped neck seams; breast pocket; UPF 40+ fabric blocks 98% of UV radiation. Quality: 55% Cotton, 45% Polyester, 175g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluorescent orange/navy. Complies with: EN ISO 20471 class 2.
Hi-vis sweatshirt PW370: Knitted cloth with brushed back; HiVisTex Pro reflective striping; Ezee Zip; multi pocket; Rib collar and cuff; Knitted Hem; Certified to EN ISO 20471 after 50 washes; UPF 40+ fabric blocks 98% of UV radiation. Quality: 65% Polyester, 100% Polyester, 280g/m². Available colours: Fluo orange/black <(>&<)> fluo yellow/black. Available sizes: S–5XL. Complies with: EN ISO 20471 class 2.
Trafic Rescue Helmet; It can be esuipped with with hearing protection and clear visor. It can also be fitted with high performance XP-lamp and SCBA mask for rescue in toxic and dusty environments.
Low shoe in full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. PU/PU outsole. Removable, polyurethane insole with textile layer. Sizes: 36-47.
Automatic welding helmet suitable for most welding applications up to shade 12. This helmet has permanent protection against harmful IR and UV radiation regardless whether the filter is dark or light. This helmet has 3 dark shade number levels and 3 user selectable levels of detector sensitivity.
• Long-sleeved T-shirt in single jersey • yellow (10) and orange (17) in polyester • modern, slim fit • double-layered collar • ribbed collar and cuffs • no side seams Available sizes: XS-4XL.
PFAS free and inherently flame retardant work jacket in Cantex Weld on the front and sleeves, and Cantex Weld/Cantex Weld Stretch on the back. Available sizes: XS-4XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
High quality dispenser with cleaning tissues, microfibre (B401) and cleaning spray (B402).
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
The X-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate recyclable bag.
The uvex Spiderneck neck support improves the weight distribution of the helmet due to the large contact area, which increases wearing comfort. In addition, mounting is very easy by screwing via the rotary knob. No PPE.
High shoe in waterrepellant suede microfiber, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Boot in waterrepellant full grain leather, with an synthetic antiperforation sole and composite 200J toecap. Fitted with a breathabl e, abrasion resistant liner in 3D-textile. Outsole in PU/Vibram, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, blue
Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with slip ratchet. Has a Chamlon sweatband.
