BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Belt, decontaminable, as spare spart for motor unit Versaflo. No PPE.
Compressed air bottle in composite 6.8l/300bar with tap. Content 2040L breathing air. Can be mounted on all compressed air, except the BD mini. Can also be mounted on small compressed air carriage. Weight: 4.2kg. Supplied unfilled and with test certificate. Recertification required every five years. Service life 15 years. Equipped with outflow safeguard.
Ambidextrous black neoprene wrist support with reversible hook and loop strap. No PPE.
The M-985 Earmuff Assembly allows 3M™ Versaflo™ M-100 Series and M-300 Series users to use headgear-mounted earmuffs. SNR: 28dB In accordance with: EN 352
Emergency shower for spray on contaminated body parts, manual operation, fixed or mobile set up. High pressure polyethylene container, propellant. Handy emergency shower 5 litres, can be installed or mobile (in carriage), within easy reach at the workplace, filled with neutralising liquid HEXAFLUORINE®, suitable for chemical splashes, atomized liquid for perfect dispersal, 2 years of storage time and maintenance free, single-use, no contact between propellant and liquid, refillable.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 4: operating voltage 36,000V, test voltage 40,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-11.
Martor spare knife type 37020.20. PPE Category not applicable.
High shoe in full grain leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Laces are heat resistant. Has BIOMEX-PROTECTION- support for stabilizing the ankle. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
Spray for the cleaning and rinsing dust and dirt from eyes and wounds. The spray provides a gentle stream of moisture and has a total rinsing time of 5 minutes. The spray can be used several times and is sterile to the last drop. Contains 150ml sterile saline solution 0.9%NaCl. Environmentally friendly propellant. Fits in the first-aid station.
Hygiene set for Peltor X2 earmuff.
High shoe in brown water proof full grain leather AP 23, which was treated by Jallatte in an exclusive manner. This high quality leather offers an extra protection against humid weather conditions and spots. The shaft has a leather lining in order to protect the ankles and the Achilles tendon. The dual density sole out of Softane has a good slip resistance and protects against oil and hydrocarbons. This shoe has a good shock absorption. Perforated nose in Aérane-Tech polymer, which makes the shoe lighter. Thanks to these perforations the sweat can easily leave the shoe. The midsole is seamed directly onto the shaft which makes that the foot is 100% closed in. Metal anti-perforation midsole. Sizes: 38 – 48.
Comfort for static kneeling situations. Closed-cell foam is non- conductive, resistant to petroleum, and silicone-free. Beveled safety edge, convenient handle. Dimensions: 46 X 91 X 2,5cm. No PPE
Harness with two attachment points: on the back and on the chest. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
Rebel fall-prevention device with 10 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical use. Weight: 5.6 kg. Can be maintained.
Skin tone: with pad made of viscose wadding, covered with thin polyethylene film which allows moisture to escape but does not stick to the wound. The plasters are perforated, individually wrapped. To cover and protect small superficial wounds. Pack containing 40 items.
Refillable panel with first aid material for minor accidents. Clearly organised, with instructions. Content: plasters, disinfectant wipes, protection kit, bandages to stop bleeding. Dimensions: 56 x 29 x 12 cm.
Antistatic clog autoclave Studium, very suitable for surgery and aseptic places. With antislip SRC, antistatic ESD and shock absorption in the heel. Adjustable heel strap. Autoclavable up to 134°C. Available in different colours and double sizes. Sizes: 35/36 - 45/46.
This is the first Box Cutter in the world with a ceramic knife. The special shape of the handle protects your hand from injury. Opening boxes is fast and safe. The blade can be put into 3 positions quickly and easily for a longer/shorter blade. • Includes a double sided ceramic knife. • Remains sharp 10x longer than a steel blade. • Blade is fully extendible and adjustable. • Easy blade placement. • Reserve blades available. In packs of 4 (1027188). For left and right handers
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: SO2 with alarms at 2PPM and 4PPM. (min. 2PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Content for first aid kit Q50BE (Art: 1031054). Dutch and French docs always included
P filter for TR-600/TR-800 motor unit. Protects against highly toxic dust, mist, smoke particles and irritating odours. Clogging of filter only be detected through an increase in the (breathing) resistance, motor unit will then sound an alarm.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Width: 2,54cm, lenght: 2,74m Not PPE.
Max. carrying capacity: 2.3 kg. For use with apparatus with closed handles or pre-drilled holes. Total length of 22 cm, the black loop (part to be attached to the apparatus) has a length of +/- 15 cm.
Low-cut, metal-free sportive safety shoe S3 in black synthetic metarial with 200J synthetic Medi-cap and synthetic anti-perforation sole. Fitted with a breathable textile lining. Padded tongue and removable, antistatic insole, moisture absorbent. Fitted with a shock absorbent, comfortable Hydroflex gel system. Sole made of PUR (PU/PU): suple and lightweight, oil and petrol resistant, slipresistant. ESD: electrostatic discharge. Free from silicones and phthalates. Sizes: >15 (35-50).
Earplugs with cord, made from a slow expanding, PU foam material. •An Ear Plug that gives evenly distributed pressure and a good seal with optimum comfort.
Includes Supravision Extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
Bumpcap in nylon or hi-vis polyester with reflective accents, with LED lighting technology: Protection against cranial bumps and bruises from a state-of-the-art shell; comfort and style from a very cool lid. Built-in LEDs illuminate projects without a flashlight or bulky headlamp (48 lumens). Battery life of approximately 30 continuous hours. Removable impact-resistant shell with foam lining. Sizes: 56-64cm.
Automatic welding helmet from the 9100 series in durable, lightweight material. This 9100XXI filter version has improved optics, which allows you to more readily recognize colours and contours. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. With three automatically darkening welding filters (5/8/9-13) and replaceable side windows. Width of welding filter: 73x107mm. Battery life: 1800 hours.
Foldable examination table including a handy case to carry. • Dimensions standing version: 197 cm x 70 cm x 75 cm. • Folded size as a suitcase: 70 cm x 98 cm.
Plaster with a detectable strip under the cushioning. Suitable for food industry or anyone who comes into contact with food. The plasters are blue and are easy to spot. Dimensions 18cmx2cm.
Heavy-duty safety knife suitable for demanding applications, ideal for cutting cardboard, shrink wrapping and strapping. • Moving blade prevents snags or jams. • Pocket and finger safe - enclosed blade prevents accidents. • Built-in tape cutter opens sealed boxes without damaging the productsinside. • Quick 10 second blade change prevents extended down-time. Detectable version for food industry. Replacement knives: 1054991
Box with 200 pieces cotton buds double sides in different colour.
Rolled quick bandage, suitable for dressing a wound. Dimensions: 6x8cm. Handy for larger wounds on a straight section of an arm or leg.
The wall and magnetic support brackets hold the Skipper unit in place without the need for a cone or post. They can be used to connect to either magnetic surfaces such as metal shelving and vehicles (magnetic version), or screw into position for a more permanent fi xture (wall version). Dimensions: 168(H) x 124(W) x 130(D)mm Weight: 170g
Overall in grey Tychem F material with fixed socks and attached neoprene gloves. Provided with Butyl facial seal to support mask. Zipper on back at shoulder height overlaid flap. Conforms to EN14605 Type 3-4, EN 1073-2 and EN 14126:2003.
Hood in 100% polyester with Gore®Pyrad® textile technology (ePFTE membrane). Laminated, to be combined with parka Ebro. Available sizes: S-3XL. Available colours: hi-viz yellow, hi-viz orange, hi-viz red.
5 x 2 urinal mats, fresh smell for 30 days, available in various perfumes, reduces the risk of splashing.
Arm protector heat and cut resistant. Length 45 cm.
Electrical insulation mat, in line with: BS EN1111:2009. Protects against electrical shock, ideal for use for switchboards and equipment under high voltage. Ribbed surface provides traction under the feet. Resistant to acids, oil and low temperatures. With colour coded tape on rear to indicate classification. Thickness 3mm category 0 resistant to 1Kv. Supplied per running metre.
These class 2 forestry trousers combine the basic features of the Progress range with TeXXion outer fabrics and extremely robust rei nforcements with saw protection. Available sizes: XS-3XL. Available colours: Red/Black. Complies with: EN 381-5 class 2, 24 m/s.
Safety helmet with integrated eye protection made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Lens cleaner spray B412 with aqua formula, Alcohol and Silicone free. Suitable for all types of lenses. Anti-bacteria, anti-static and anti-reflective. 250ml.
Thermal undershirt in 100% polyester (140g/m²). Keeps the body dry and cool. Round neck, tricot cuffs. Available sizes: S-4XL. Available colours: black, grey anthracite.
Cooling vest based on PCM technology to prevent heat stress and fatigue in very hot environments. Provides constant cooling choosing from 3 different temperatures. Outside material: robust canvas with inner polyester mesh lining. 4 pockets for coolpacks, adjustable waist and front zip closure. 29°C cool pack included. Available sizes: S-XXL. Available colour: black.
Chlorinated (provides more comfort and is less sticky) with texture on the fingertips. Biodegradable. Size XXL: 90 pieces per dispenser.
Portable counterweight anchorage that can be placed easily on a flat rooftop to connect maximum 2 workers to an anchorage point. Contains 12 loads of 24 kg, a base and D-ring. In line with EN795E.
Well designed fireman's helmet made of thermo-hardened phenol textile, coated with photoluminescent paint and finished with reflective strips. Easily replaceable PU suspension, height adjustable, with a 4-point fastening strap with wheel ratchet. Pyros offers exceptional shock absorption and is resistant to extreme temperatures. The polycarbonate shield is scratch resistant and forms a hermetic seal at the top to protect against spattering. Shield tested in accordance with EN14458. This high-quality helmet can be worn in combination with corrective glasses, standard compressed air masks with a spider strap, and a communication system. Can be optionally equipped with a neck flap (see figure/ref.: 05550001). Total weight: 1150 g.
Spectacle with grey PC lens with Supravision Excellence coating: anti- scratch (outside) and anti-fog (inside). Has ajustable side-arms and nose. Fits perfect onto the face. Color: black/red.
Very comfortable Fall arrest harness with 2 mounting points on back and chest. Breast Fixation Point by D-ring. Leg and shoulder straps with quick release, very easily adjustable. Harness very easy to put on. Size: XXL. Weight: 1,28kg. Suitable for general industrial applications.
Padded bodywarmer with breast and side pockets. Fleece lined collar. Internal windflap with chin guard to prevent chafing. Spacious inner pockets. Attachment for ID-card. Extended back. Reflective piping on the back and on pockets. Lining can be opened to facilitate printing and embroidery. Quality: 65% polyester / 35% cotton. Available sizes: XS-4XL. Available colours: Red, navy, grey, black, green, skyblue and kakhi.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Intrinsically safe (Ex-proof) battery for SR 500 EX motor unit.
Beanie in single jersey with matching flatlock stitching. Quality: 95% Cotton 5% Spandex (Black). 60 % polyester, 33 % cotton, 7% Spandex (yellow/orange). Available sizes: Universal. Available colours: Skyblue, forestgreen, black, navy, orange, yellow/navy, grey and red.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 30,5 cm.
Apron made of polyester / cotton with one large hand pocket on the front. This apron is available in sizes S-XXL in the navy and dark gray nimbus. The Eloise apron has a standard length of 80 cm.
Rope grab for use with 10.5 and 12,5 mm kernmantle rope. For vertical or near vertical fall protection on a temporary safety line. Follows the person's movements along the rope autonomously, without manual intervention. Can be blocked so that the person can only ascend, the device then becomes a field limiter in horizontal applications. Easy to remove and install on the rope. Includes connection to the chest anchoring point.
This sweater from the Casual line is washable at 60 degrees. The American Fleece material keeps you warm during cold working days. After washing you can easily dry the sweater in the dryer. Fabric: The polo sweater is made of 70% cotton and 30% polyester. Available colors: navy, black, red, royal blue, white and dark gray. Available sizes: XS-5XL.
Set of 10 smoke tubes, aspirator, sealing caps and carrying case for establishing and checking air currents when checking ventilation systems, for the detection of leaks in pipelines, stoves and windows, and checking ventilation systems in mining. No PPE.
A softshell is a smooth, comfortable jacket that is also water-repellent and windproof. The material is made of a woven polyester. The use of a PU intermediate layer ensures that the breathability remains optimal and you do not sweat. The stretchable fabric ensures that you retain your freedom of movement. The softshell contains stretch for extra comfort. The jacket is also more visible through the reflection piping on the chest. This garment has a laminated zipper for a luxurious look. The bottom of the jacket can be adjusted by means of an elastic cord with stoppers and the cuffs can be adjusted by means of Velcro. The Softshell has four pockets at the front and therefore offers plenty of storage options. This jacket also has an inside pocket that can be used for storing the phone or MP3 player. Fabric: 94% polyester, 6% spandex, plain weave, PU MEMBRANE, 340 g / m². Available colors: navy, black and gray. Available sizes: XS-3XL.
Hi-vis polo shirt with ARC protection: Lay flat collar; Closure with hidden buttons under flap; long sleeves; Welded segmented reflective tape. Quality: 54.5% modacrylic + 44.5% cotton + 1% AST; ± 220gsm. Available sizes: XS-3XL. Available colours: Fluo yellow/navy. Complies with: IEC 61482-2 : 2009 class 1 - EBT 7.4 cal/cm², EN ISO 11612 : 2008 / A1 B1 C1 F1, EN ISO 14116 : 2008, EN ISO 20471 : 2013 / Class 2 and EN 1149-5 : 2008.
This thermometer is capable of recording body temperatures between 32º and 42.9º. It also features an alarm function that alerts in case of fever (if the patient's temperature is equal to or higher than 38º.) Technical details: - Dimensions: 153x88x45 mm - Weight: 122 grams (without battery) - Stable, high-precision infrared sensor - Adaptability to the room temperature - Ability to store 32 temperature records - Unit of measurement: Celsius and Fahrenheit degrees - Automatic shutdown function for energy saving - Large LCD display with high definition tricolour backlight (green for normal temperature, yellow for warm temperature, red for fever temperature).
