Spill kit for small to medium-sized incidents involving ADR transport. Packed in transparent carry bag that can easily be stowed in the truck. Content: 25 cloths 41 x 51 cm (Art: 1004202), 4 socks 7.6 x 122 cm (Art: 1004210), 1 pair of gloves, 1 waste bag and 1 Emergency Response sheet. Absorption capacity: 37 litres. The absorption material in the spill kit is of UN quality.

Sterile universal dressing with four functions, especially suitable for fingers and toes. Contains one elastic bandage (6 cm x 3 m), with a sewn-in dressing (8 x 12 cm). Clear instructions on the inside of the pack.

Screen carrier in aluminium for a perfect fit on the Centurion Vulcan helmet.

Lightweight disposable breathing hood with hood made of PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.

Adsorbs all industrial liquids including oils, water, solvents and coolants. GP roles have a better and less fluffy finish compared to traditional one-layer melt spinning reels. Role Dimensions: 96 x 44m. Recording capacity: 192 liters. Package: 1 roll / bag. Ideal for covering larger areas. No PPE.

Terylene suspension with ratchet, resistant to high temperatures, fittedwith an XL VABON sweatband, suitable for Centurion Vulcan S22.

Safety helmet made of ABS. With 4-points suspension 'Fas-trac' in textile (52-64cm), with a wheel and highly absorbent textile sweatband. Vented. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange, gray, black. Weight: 400g.

High-shoe S3, semi-orthopaedic, in full grain leather with toecap in aluminium sole with L-Protection. Equipped with 100% Nappa cowhide leather lining. Sole in Nitrile and HRO. Antibacterial insole. Sizes: 39-47.

Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE. not damaged by scuffing from pallets. Available in different colours and sizes. Not PPE.

Leather belt to link the connection hose from the demand valve to the compressed air hose coming from the filter system in order to prevent the mask from being pulled off. Couplers to be ordered separately.

external high resistent collar as spare spart of hoods M-406, M-407. No PPE.

Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 41 cm.

The 0.63 mm thick stainless steel blade is ideal for various materials. The ergonomic aluminium holder offers a high degree of stability and is suitable for right and left handers. The thumb can remain on the slider while cutting but the blade will slide back after use. Ideal for use with safety gloves. Replacement blades 199: 1016574

Dispenser with 500 pairs of disposable earplugs suitable for lower noise levels. The conical shape allows the earplug to be introduced into the ear canal easily, where the foam will expand to the ear canal's individual shape. Simply turn the knob at the bottom of the dispenser and the earplug will be dispensed into your hand. For the sake of hygiene, the container is replaced in its entirety. All Moldex products and packaging are 100% PVC-free. Wallholder available (SAP 1001186). MelLows SNR = 22 dB

PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.

Trousers, Gore ® pyrad TM Fabric Technology, 2-layer laminated in polyester, waterproof, windproof, breathable (WWB).

Front cover kit for welding helmets 9100FX, 9100 FX-air and 9100MP.

Bandage scissors for cutting bandages or tape Material: stainless steel. Matt Silver - can be sterilised. Dimensions: 14 cm

DIPHOTERINE® wall station, not frost free. Contents: Eyewash bottles: 2x500ml, aerosol mini DAP: 200ml, Afterwash: 200ml, DAP 5l. Dimensions: H: 725mm, L: 380mm, D: 300mm .

Very light sportive low shoe in microporous washable leather and lining in mesh nylon for more comfort. Outsole in very light material EVA, SRA anti-slip. Sizes: 40-46.

Men's trousers in 65% polyester/35% cotton, 245 g/m² with 2 side pockets, 1 thigh pocket, 1 back pocket with flap and ruler pocket. Modern design with hi-vis details. Available sizes: 36-64. Available colours: Grey/Hi-vis orange, Navy/Hi-vis yellow. No PPE.

The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Sensors must be deactivated separately as required. LEL sensor is set for methane by default (specify if a different gas is applicable for the LEL sensor). Version: CO and LEL. IP rating 65 and Atex approved.

Elastic anti-fall cords for tools - 4.5kg max. carrying capacity - mini 81cm to max 119cm when fully extended

Self-adhesive waterproof high-visibility tag with personal info. Statement: In Case or Emergency. You stick this ticket on your helmet after you have entered all of your important personal information. This would include your name, address, companies who should be contacted in the event of an accident. It could also include any allergies, diseases such as diabetes etc. In short, anything that could be of interest to the first responders in order to identify you.

Inox scissors (15cm) for cutting fabric or paper. Does not cut in skin.

High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar. Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Model on base. Can be ordered with 3-way output 1002713 and 1014794 couplers. For use with compressed air hoses with maximum lenght of 10m.

Goat-hide leather glove for TIG welding. Heat resistant to 100 ° C. Length of cuff: 16 cm. Sizes: 6-11.

Safety Scissor Secumax 565. Stainless steel scissors, suitable for all industries.

High-shoe in microfibre, fitted with a steel toecap and plastic anti-perforation sole. With Sanitized silver lining for good moisture absorption and ergonomic, comfortable insole. Outer sole in PU/PU. Sizes: 35-42.

Pack of sterile gauze compresses with dimensions 10X10cm. Air-permeable, soft non-woven material, absorbent, suitable for many wounds and can also be used to clean wounds.

Welding goggle with grey lens and with Infradur Plus coating (provides protection against UV and IR radiation without deforming the colors due to the grey lens (EN 172). Has an anti-fog coating on the inside and an anti-scratch coating on the outside.

3M™ Solus™ 1000 is an adjustable safety spectacle. It has a Scotchgard anti-fog layer which protects longer than a normal anti-fog layer. Marking: 5C-3.1 1 FT KN.

The 3M™ Goggle Gear, 500-Series is a low-profile design with an adjustable strap and indirect ventilation. These splash goggles with 3M™ Scotchgard™ Anti-Fog Coating help keep lenses clear in, steamy and wet environments.

Classic goggles with appropriate fit for each face. Lens in gray polycarbonate: like all uvex PC lenses offer the gray tinted lenses 100% protection against harmful UV radiation to 400 nanometers. The gray tint filter parts of the visible spectrum and it offers protection against intense glare of sunlight among others. The color signal recognition of color remains unhindered. Protects against reflections and optical irritations outdoors (e. g. water surfaces) for greater visual comfort. With anti-scratch coating coating.

Can of styptic spray 50 ml.

Safety scissors 25cm in stainless steel, high quality Easy to clean. Cuts paper and fabric but not the skin Safe round tip. Also suitable for the food industry

Dust mask, class P2, for harmful dust and ozon. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against ozon 10 x MAC value thanks to active carbon layer. NPF: 10.

Rebel fall-prevention device with 15 metre stainless steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the AM100 tripod via adapter.

Convenient plastic holder for Diphoterine Micro Dap.

Kernmantle rope 10m diameter 10.5mm. For individual use or in combination with rope clamp.

Compact knee pad with handle for easy carrying or storage. Colour: Orange. Dimensions: 20cm x 46 cm x 2.5 cm. Not PPE.

Aspivenin is handy in the event of bites, by insects or even reptiles. If is useful if the bite involves an animal that injects a liquid (toxin) under the skin.

Full face mask in TPE with visor in polycarbonate anti fog, with filter connection EN148.NPF depends on used filter, 2000 with motorunit T-Air. When used with motorunit, the hose 1046652 needs to be ordered separately In line with EN136-2; EN12942

P3 filter with thread connection EN148-1 in ABS housing.

High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.

Cobra hybrid safety specs combines the advantages of regular safety specs and goggles. Has an anti-slip temple and branches. Smoke polycarbonate lens with anti-scratch and anti-fog coating.

Long sleeved flame retardant and antistatic t-shirt in 60% merino wool/38% Lenzing FR®/2% Beltron®. Very comfortable and heat regulating properties, elongated back, long sleeves. Available sizes: XXS-XXL. Couleurs disponibles: anthracite.

Cooling vest based on PCM technology to prevent heat stress and fatigue in very hot environments. Provides constant cooling choosing from 3 different temperatures. Outside material: robust canvas with inner polyester mesh lining. 4 pockets for coolpacks, adjustable waist and front zip closure. 29°C cool pack included. Available sizes: S-XXL. Available colour: black.

Low shoe in synthetic PU. Fitted with a breathable, abrasion resistant liner in mesh. Outsole in EVA/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole. Sizes: 35-42. No PPE.

Laces, black flame retardant. Length: 100cm. No PPE.

J-Energy series. High shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.

Ballistic safety glasses with flexible, adjustable anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-fog layer (H2X).

High ranger shoe in Hypertex with Putek technology, with a synthetic antiperforation sole and steel toecap. Fitted with a breathable, waterresistant Tepor membrane. Outsole in Vibram, oil and carburant resistant. Has chainsaw protection class 2. Removable, polyurethane insole with textile layer. Sizes: 38-48.

Sandal S1P in black microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12, 14: 35- 52.

Softshell jacket for women in light stretch material. Two-tone front zip and side pockets. Adaptable sleeves with velcro closure and drawstrings at the hem at the bottom. Zippullers in contrasting color. Quality: 96% polyester, 4% elastane, brushed inside. Available sizes: XS - 2XL. Available colors: black, white, navy, dark gray, green, blue and red.

The work jacket offers plenty of storage options due to the different pockets. By being able to cover all metal push button closures, this work jacket is extremely suitable for the automotive sector or other activities where the prevention of damage to the surface is very important. This is also a very pleasant portable and multifunctional work jacket for other sectors. Available sizes: XS-5XL. Available colors: navy, black and dark gray.

Overall Industry flame-retardant treated cotton: - Concealed button closure at centre front - Single layer chest pockets with safety fl ap and button closure - Slanted side pockets - Side vents with safety fl ap and button closure, behind side pockets - Kneepad pockets - Adjustable waistband for improved ergonomics and ultimate comfort - Single layer back pocket with safety fl ap and button closure on RHS - Single layer tool pocket on RHS leg Quality: 60% cotton / 39% polyester / 1% AST, 360 g / m². Available sizes: 48-66. Available colors: Navy. Complies with: EN 1149-5, EN ISO 14116, EN ISO 11611 class 1, and ISO 11612 A1B1C1E1F1.

Radiant heat cover to cover head and shoulders for airhoods M-400. No PPE.

The AGC + overalls are IFT homologues for insect bites: - Thick "anti-bite" substance with special treatment, - Removable panoramic screen and metal for a full view without turning the head, - DIPTER marked gloves with pre-positioning for increased safety, - clamping clamped arms and legs with new safety belts, - Double thickness on the tension points (elbows, thighs, back) to prevent punctures, - Zip closure with flap protection against intruders, - Vented eyes with grate for better ventilation and safety, - Combinations supplied with helmet, removable screen and a pair of gloves. Available values: <(><<)>1.85 m (red)> 1.85 m (green). In accordance with: EPI standard NF EN 340.

Ceramic blade with rounded tip in durable nylon handle. Ambidextrous desing. Non-sparking, non conductive, non-magnetic blade. Chemically inert, blade never rusts. Oil-and lubricant-free blade, safe up to 1600°C. No PPE.

This jacket is equipped with knitted wind cuffs in the sleeves, two pockets on the inside and two pockets on the outside. The sleeves are removable and this jacket can be fitted with a hood. The breathable, water-repellent outer fabric and moisture-absorbing coating on the inside protect you from wet weather conditions. Available colors: Hi-Vis yellow/Navy and hi-vis orange/navy. Available sizes: S – 4XL.

- Dexterity and robustness - Cold protection and heat contact resistance - Latex coating on the palm with excellent grip - Respects the natural shape of the hand - 10 gauge - Sizes: 7(S) - 11(XXL) - EN388:2016 3.X.4.2.B - EN511:2006 X.1.X - EN407:2004 X.2.X.X.X.X

Cederroth First Aid Kit Large is a well-stocked First Aid Kit made from a rubber-like material with a matte finish to keep dust, moisture and dirt at bay. It keeps the equipment hygienically clean, so it is always ready to be used. The products are packed in transparent plastic pockets, so you can clearly see all the products, making it easy to find the product you need when every second counts. All products come with clear, self-explanatory instructions. The kit is bright green and yellow, making it easy to see from a distance, while the easy-grip handle makes it easy to carry the kit with you.

Dimensions: 310 x 247 x 80 mm.

Contents: 1 breathing mask + 2 pairs of gloves + 2 safety hand cleaners (1006151), 1 triangular bandage (1059984), 1 rescue blanket with a heat-reflecting aluminum side (1059990), 1 scissors (1059994), 3 Cederroth 4-in-1 blood stoppers (1006155), 2 Cederroth 4-in-1 mini blood stoppers (1006134), 2 metallized bandages 20 x 40 cm (1059993), 1 Cederroth Burn Gel Dressing (1044626), 20 Salvequick plasters + 10 Salvequick wound cleaning agents (1059991), 2 elastic bandages 8 cm x 4 m (1059989), 1 table of contents, 1 first aid instructions.

A set of high intensity, highly reflective accessory stickers, for the Nexus range of safety helmets. Helps to ensure maximum visibility of workers in low light level environments. 7 different stickers provides coverage on front, side, rear and top of the helmet.

Flame retardant and antistatic signaling fleece with arc protection. Upright collar; Zipper under flap with velcro fastener; 2 inset pockets with zipper; Rounded-in sleeves; Elastic in sleeve end; Elastic cord in hem. Quality: 54% Modacrylic + 34.2% FR cotton + 10% polyamide + 1.8% AST; ± 310 g / m². Available sizes: S-3XL. Available colors: Fluo yellow / navy. Compliant with: IEC 61482-2: 2009 class 1 - EBT 10.7 cal / cm², EN ISO 11612: 2008 / A1 B1 C2 F1, EN ISO 14116: 2008 / Index 3 / 25H / 40, EN ISO 20471: 2013 / Class 2, EN 14058: 2004 / Class 1 xxxx and EN 1149-5: 2008.

The Hi-Vis class 3 BasePro chainsaw pants have been developed to offer the highest possible protection against frontal chainsaw according to the EN 381-5 standard: Zipper and 1 button closure; 2 deployed pockets; 1 patched back pocket with zip; 1 patch pocket for pleoimeter and system for fixing the spark plug key; Elastic waist with loops for belt and loops for suspenders with velcro; Lumbar top with suspender loops; 3-needle stitching on the back to the cross. Quality: 65% PES / 35% cotton. Available sizes: S-3XL. Available colors: FLuo yellow / black and fluorescent orange / black. Compliant with: EN ISO 20471: 2013 + A1 2016 / Class 2, EN 381-5: 1995 / Class 3 - 28 m / s design A and EN ISO 13688: 2013.

Shirt with round neck, front and sleeves constructed with CUTEX®, back made of functional knitted fabric, increased protection of the forearms due to additional fencing fabric inside, Superfabric abrasion protection in the abdominal area and thumb hole. Available sizes: S-4XL. Available colour: yellow and black.