High shoe in waterresistant synthetic textile (100% leatherfree), with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane semi-orthopedic insole with textile layer. Sizes: 36-48.

Fall-prevention device, 6 metre webbing strap, with integrated shock absorber. Plastic casing. Almost immediately stops any vertical drop motion. Rotatable hook ensures strap does not twist. Serves as connection between anchor point and harness. Only for vertical use.

High shoe in microfiber, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% leather free. Sizes: 38-48.

Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Length 41 cm, Sizes: 7-12.

Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 60 cm to 63 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.

Flame retardant and antistatic hi-vis softshell jacket in 100% polyester with FR PU membrane and inherent FR fleece (400g/m²). Zip closure under flap with velcro, straight collar, 2 inset side pockets, 1 chest pocket with zipper, 1 inside pocket, cuffs adjustable by velcro, 1 loop for ID badge, detachable sleeves, length back: 75cm, stitched seams. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.

Compact safety knife for routine cutting tasks. The metal-detectable plastic handle makes it easy to trace. It's concealed cutting edge easily copes with single-layerd card-board, film and packing tape and keeps your fingers safe. To order by 10 pieces. No PPE.

High shoe in water-repellent suede leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, a brasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.

Waistpants with great flexibility. Stretch fabric across seat, crotch and knees area to provide extra freedom of movement. Leg pockets with zipper. Back pockets with flap. Attachment for holster pockets. Hidden button at front. By unpicking the red stitching at the hem the trousers can be lengthened by 5 cm. Quality: 65% polyester, 35% cotton, 245 g/m². Available colors: red, sky blue, navy, green, beige, gray and black. Available sizes: C32-C50.

Tool to fix the atex battery TR-830 to the Atex motor unit TR-802E. No PPE.

The Talia signalisation raincoat was therefore especially designed for them. With ergomic sleeves, underarm ventilation, an elastic cord at the waist and an elastic wristband with narrowing by means of Velcro closure was thought to comfort. The practical side also thought about a removable hood with elastic cord that can be stored in a special bag on the inside, 2 stuffed things, 1 sleeve pocket and 1 inside pocket. Quality: Siopor® Ultra: 100% polyester fabric with 100% PU coating; ± 195 g / m². Available sizes: XS-2XL. Available colors: Fluo yellow and fluo orange. Complies with: EN ISO 20471 class 3 and EN 343 class 3: 3.

Skipper unit with 9m length. Dimensions: 240(H) x 145(D)mm Weight: 950g

This sweater with a zipper collar is particularly shape and colorfast. The inside is roughened for extra comfort.   Quality: 60% cotton / 40% polyester, American fleece. Available colors: Red, royal blue, navy, anthracite, black, lime. Available sizes: XS - 7XL.

This T-shirt from the Casual line is washable at 60 degrees. The elastane provides a nice fit and a high wearing comfort. After washing you can easily dry the T-Shirt in the dryer. Available sizes: XS-5XL. Available colors: white, black, navy, royal blue, red and dark gray.

These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.

Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable lin er in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 37-47.

Bermuda Shift Covered with zipper, thigh pocket, 2 inset side pockets, D-ring, ruler pocket with tape measure pocket, adjustable elastic waist and 1 back pocket with snap button closure. Quality: 65% / 35% cotton / polyester, 2/1 twill weave, 290 gr / m². Available sizes: 44-66. Available colors: navy / gray, blue / gray, red / gray, black / gray and charcoal gray.

Fleece in 100% polyester (300g/m²). Straight collar, 2 front pockets, zip closure. Available colour: navy. Available sizes: XS-3XL.

The Multinorm Fleece Jacket is made from 60% modacrylic, 39% combed cotton and 1% carbon with a fabric weight of 280 g / m2. This product is EN ISO 11612 (protection against heat and flame) and EN 1149 (protection against electrostatic properties) certified. The fleece jacket is ideal to wear in cold and bad weather conditions. Available sizes: XS-5XL. Available colors: Marine. Compliant with: EN ISO 14116, EN 1149-5: 2008 and EN 14058.

Flame retardant ARC T-Shirt with round neck and knitted cuffs. Quality: Cantex Jersey 170AT, 170 g / m². Available colors: Navy. Available sizes: XS-4XL. Conforms to: EN ISO 11612: A1 + A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5.

P3 RD Elipse replacement filter for usage on Elipse Integra masks. Pack of 10 paires..

These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.

Low-cut, light, metal-free, perforated safety shoe in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/PU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.

Practical plastic hearing protector (di-electric) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.

High shoe in nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.

High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.

T-shirt Fitted from the Rewear collection. Quality: 50% Organic Cotton / 50% Recycled Polyester, 160 g/m². Available colors: Dark Gray, Navy, Black and White. Available sizes: XS – 5XL.

Flame retardant women's chino pants with stretch. Lots of freedom of movement and high comfort for both sitting and standing work or a mix of these. Non metal. Front pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket, concealed key ring and tool loops. Quality: Cantex Stretch, 365 g/m². Available sizes: 36-48. Available colours: navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² ATPV: 18.0 cal/cm².

Low shoe in Safety Knit® textile. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. BreathActive lining. Outsole in Impulse Foam/rubber, resistant to 300°C. Removable, polyurethane insole with textile layer. Sizes: 36-47.

Black safety boot in PVC, fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC. Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Sizes: 35-50.

Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility.

Centurion adapter S565 for 30mm slots.

Connect clip for combining Roofer with wire mesh visor and hearing protector.

Peel-off protection foil 9993 for screen of full facial mask series 9000.

Cold resistant gloves with a creative combination of high-tech, breathable materials (Hipora) and very high tactility. Lining with 40g of 3M Thinsulate®. The palm also has a double reinforcement. Touch screen-capable thumb fand index fingers. Sizes: S / M / L / XL / XXL.

Heat resistant Kermel mitt with double lined cotton fabric. Kevlar® reinforced at the thumb. Split leather 13 cm cuff made with Kevlar® fibres. Contact heat to max. 500 °C.

Seamless knitted cotton, NO PPE

Excellent tactility, the perfect solution in situations involving chemical risks thanks to combination of neoprene and natural latex. These unlined neoprene gloves are natural latex on the inside, flock-lined with cotton and have a standard profile.

Traffic cone made of polyvinyl chloride, fluorescent orange and reflective white. Height 30 cm, reflective white band around circumf erence, black non-slip base, highly visible during the day due to fluorescent orange colour and at night due to reflective propertie s.

Short winter cap in 2 layers of cotton to be worn under safety helmet in extremely cold conditions. Features reflective strips, with space for a cap warmer on both sides.

Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.

Absorbent pads 41 cm x 51 cm. These heavy-weight perforated pads are packaged in a box. Packaged per 100 pieces. The wipes are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 114 litres.

Blue plastic work floor with black removable grid. Absorption capacity: 130L. Dimensions: 1260x860x150mm. Suitable for small packages. Corrosion-resistant. Weight: 20kg.

Absorbent pillows measuring 43 cm x 48 cm. These heavy-weight cushions are packaged in a box. Packaged per 16 pieces. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorbent pillows for regular leaks in the same place. Absorption capacity: 105 litres.

These reusable & detectable earplugs are an ideal alternative to
otoplastics for personnel who are only temporarily exposed to noise or
for temporary personnel who work under noisy conditions. The Comfoor
Parttime includes a unique filter that filters out all the harmful
noises, without completely blocking the ear. As a result, conversations
and sounds from the surroundings remain audible and there is no sense of
vertigo. It is made of skin-friendly, durable silicone material that
easily conforms to the ear. The result is a good seal and superb wearing
comfort. Thanks to the unique design and special grip, the Comfoor
Parttime is easy to place in the ear and to remove. Can be optionally
fitted with a cord with clothing clip. Available in: blue.

(SNR 24 dB).

Automatic welding helmet from the 9100 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. With three automatically darkening welding filters and replaceable side win dows. Width of welding filter: 73x107mm. Battery life: 2000 hours.

Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate with silicate coating, provides very wide field of vision (95 %). Speech is conveyed via the speech membrane, which provides clear speech transmission. Speech membrane is positioned so the filter is not in front of it. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupling. Also available order in size small or in silicone rubber.

Prinzing locking system for ball valves in red polypropylene. Two halves enclose the handle of the ball valve so that it cannot be opened or closed accidentally. Not PPE.

Low shoe in nubuck leather and Techno leather (long-lasting), with a steel anti-perforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant Vent-Air liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.

PPE with CE - mark of class 3.

Universal roll suitable for maintenance work in an industrial environment. Heavy weight, perforated and bonded. Dimensions: 38cm x46m. Packaging: 1 roll per cardboard dispenser. Absorption capacity: 94L.

Access ramp for sump pallets. Dimensions: 650x800x160mm. Weight: 8kg.

Polo, 60% modacrylic 39% cotton 1% carbon, 200gr./m², flam retardant, antistatic, long sleeve, 3 button placket. Available in: navy, black and grey.

Bomber, 100% polyester, PU coated, 190g./m². Fleece in collar, ID pocket, hood in collar, reflective bands.

Coverall Micromax TS with Tape sealed seams, Elastic face, Elastic wrists and ankles, Storm flap over zipper, Sealed seams, Elasticated hood, waist, cuffs and ankles and "Super B" pattern. Available sizes: S-3XL. Available colours: White.

Hard plastic (grivory) safety knife with automatic blade retraction
system. Designed for all normal cutting jobs, especially box-slitting.
The ergonomically squeeze lever - made out of aluminium and a soft
plastic component - provides comfortable and non-slip handling. For use
by right- and lefthanders. Easy blade change: no extra tools required.
With 2-edge/4-point blade for extra economy. No PPE.
Blades: 1016658

Welding goggles with white lens and Supravision HC-AF coating (extremely scratch resistant on the outside and prevents condensation on the inside. 100% UV-resistant). Flip up lens in grey polycarbonate with Infradur AF coating (offers protection against harmful UV and IR radiation when welding without altering colours, thanks to the grey lens (EN172). With anti-vapour coating on the inside and extremely scratch-resistant on the outside).

Hygiene set for Peltor X4 earmuff

configuratie op aanvraag/configuration sur demande

Glove with PE and Zirnium. Extremely good cut resistance.

Safety Scissor Secumax 564. Stainless steel scissors, suitable for all industries.

Adapter to mount Rebel fall-block on leg of tripod AM100.

Very durable and super comfortable glove, seamlessly knitted in a nylon fabric with a double nitrile coating. Glove is fully coated for applications involving a lot of oil or water. The glove provides excellent grip.

Suspension in plastic with ratchet for Peltor G2001 helmet.

Safety Scissors Secumax 363. Stainless steel scissors, suitable for all industries. Dimensions: 134x8x65.5mm