BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10
Charger for batteries LI-ON for Adflo motor unit. Batteries must be charged for four hours.
Lining that fits between cradle and helmet shell for full integration. CE approved to fit all Centurion helmets. No PPE.
Safety helmet with micro peak and integrated arc visor (class 2), made of strong ABS for improved low temperature (-40°) and side impact protection. The transparent, gray face shield provides improved optical properties. With a very high VLT (Visible Light Transmission) value of 82%, colors are much more distinguishable. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
Face shield Acetate Antifog for use with face shield holder S89 or helmet face shield holder S54 CE, made of acetate.
Low shoe in black full grain leather. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in PU/rubber. Sizes: 35-51
High shoe in black textile composed of high tenacity polyamide. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in EVA/VIBRAM. Sizes: 35-50.
Face shield (wire mesh shield) S59CEV for use with Centurion helmets (except for the Spartan). The shield includes three adapters: C for English connection slot, E for European 30 mm slot and V for Vision.
Dust mask, class P2, for harmful dust, with layer of active carbon for ozone with concentration 10 x MAC. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding. Exhalation valve for lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. With internal nose pad for comfort. Fitted with non-adjustable, elastic headbands with closure. NPF: 10.
Blue industrial paper roll, 100% recycled fibre. High tensile strength, more volume in the hand. High absorption. Dimensions: length 380 m x width 26 cm, 2 layers, 1000 sheets. For use with metal floor stand, art. no. 00330081.
Welding blanket resistant to temperatures up to 950 °C. Does not absorb any oil, grease or chemicals that would pose a fire risk. Bl anket is waterproof/windproof. Spatters on the blanket only result in a minimal release of toxic and harmful gases, much less than a ll other welding blankets. Blankets do unravel after they have been cut, have a non-slip texture and a highly visible colour. Furthe rmore, the blankets are anti-static, UV and weather resistant, and have a high electrical insulation value. Are not deteriorated by mineral-based oils and chemicals and can be used in a large range of temperatures: from -40 °C to 180 °C. Washable with pressure or steam cleaner, and durable: last up to 3x longer. All these features make these welding blankets the safest and least toxic blankets available. All the test reports are available on request.
Fleece sweatband for welding helmet 9100. Packaged in sets of three. Not separately certified as PPE.
This glove is specially designed to protect against liquid gases at very low temperatures. The Gore-Tex membrane ensures water-tightness. American assembly. The cowhide leather is oil and water repellent and heat resistant. The glove has a 20 cm long cap-cuff and is lined in wool.
Unisex spectacles in leightweight blank polycarbonate. Superior field of vision and flexible temples for an easy combination with ear and face protection.
Reversible bib <(>&<)> brace trousers / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / Washable at 95°C / High frequency welded seams / Outside: Elastic braces with buckles on front and back / Legs adjustable by press studs / Fabric: FLEXOTHANE® Kleen: / 100% polyamide knitting 6.6 with PU coating; ± 170 g / m² Colour: W02 white
P filter for motor unit Versaflo. Protects against highly toxic dust, mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. Odors only if concentration below the MAC value. NO protection against gases, only comfort.
Standard fabric belt as spare spart for motor unit Versaflo. No PPE.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Low shoe in black full grain leather, with a steel 200J toecap. Fitted with a breathable, abrasion resistant Cool comfort liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Super-light (300 g) ventilated safety helmet made of strong ABS. With 6- pointtextile suspension (52-63 cm), a handy ratchet and highly absorbenthydro-flock sweatband. This version has extended neck protection withoutventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Available in: white, yellow, blue, red, green, orange.
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1.5m. Anchor point for protection of one person.
Industrial mineral absorbent for safe, quick absorption of harmful liquids that have leaked or spilled. Rapid, large absorption capacity.Bag of 20kg.
Lined finger-sensitive nitrile cap gloves with a grip coating according to the new Grip Technology. Very good physical properties and good grip even in oily and damp/wet conditions. Top finished with straight edging. Sizes: 8 / 9 / 10, Length: 280 mm.
Flame retardant and antistatic buff with arc flash protection in 44% meta-aramid, 42% FR Viscose®, 6% Tencell®, 3% para-aramid, 3% AST, 2% elasthane. Keeps body temperature in cold environments. Very comfortable thanks to its elastic fibres and viscose®. Protects against heat, flames and arc flash risks. Dimensions: 25 x 50 cm. Available colours: navy.
Semi-orthopedic inlay sole for women. Excellent schock absorption. Suitable for products of the NOVA productgroup. Sizes: 35-42.
Cooling vest based on PCM technology to prevent heat stress and fatigue in very hot environments. Provides constant cooling choosing from 3 different temperatures. Outside material: robust canvas with inner polyester mesh lining. 4 pockets for coolpacks, adjustable waist and front zip closure. 21°C cool pack included. Available sizes: XS-XXL. Available colour: black.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12, 14: 35-52.
Constructed from premium breathable Cotton Comfort fabric combined with HiVisTex Pro tape, this polo shirt offers excellent comfort and movement. It features a loop at the placket ideal for attaching glasses/pens. Quality: 55% cotton / 45% polyester. Available sizes: XS-3XL. Available colours: Fluo oranje/black, fluo orange/navy, fluo yellow/black and fluo yellow/navy.
New generation demand valve with quick-coupling for compressed air apparatus. Demand valve that responds to lung demand very quickly and comfortably and switches to overpressure automatically upon the first breath. Maintains a constant overpressure of 3.9 mbar in the full face mask to prevent inwards leakage. For use in combination with full face masks 3S-Maxx and Ultra Elite Maxx as well as with G1 Maxx.
The Moores rain pants offer good rain protection in harsh weather conditions. These light but strong pants are comfortable thanks to the pre-shaped knees, waist with belt loops and the narrowing at the leg ends. Velcro closure. For your convenience, the rain trousers were fitted with a zippered fly, 2 inset pockets with zipper and flap and 1 padded thigh pocket with flap. In these breathable pants you will never feel clammy during work. Quality: Siopor Light: 3-layer: 100% polyester ripstop + breathable TPU laminate + polyester mesh; ± 145 g / m² Available colors: Marine. Available sizes: S-3XL. Complies with: EN 343 class 3:3.
High shoe in oiled nubuck leather with a steel toecap and plastic anti-perforation sole. With Smartec lining for good moisture absorption and an ergonomically comfortable insole. Outer sole in PU/PU. Size: 35-42.
Seamless knitted glove in yellow high-viz cut resistant ATA® fibres, with double palm and finger coating in nitile Microfinish®. Excellent cutting resistance and good grip in dry, wet and oily condtions. Available in sizes 6, 7, 8, 9, 10 and 11.
The Arbus cold storage bib and brace trousers protect you excellently against the cold with its fixed quilted lining. To stop the slightest breeze of wind, the legs can be narrowed and the hem adjusted. For your convenience, the braces come with a buckle, the knees are reinforced and the fly has a zipper. Exterior: Front fly with zipper, 2 inset pockets, Braces with buckle, Leg narrowing below by touch and close fastening, Knee reinforcement, Zip closure under flap with touch and close fastening at leg end, Adjustable hem at leg end with press studs. Inside: Fixed quilted lining. Fabric:100% polyamide; ± 185 g/m² + HV - 100 % PES ± 220 g/m² - Hi-vis Cordura: 100% polyester ± 210 g/m². Color: Hi-vis yellow/navy.
Skipper unit with 9m length. Dimensions: 240(H) x 145(D)mm Weight: 950g
Multinorm hood Diablo 12498.
High shoe in Putek® Plus textile, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/E-TPU Infinergy® extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Foldable mask, class P2, for harmful dust bulk packing. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non- adjustable, elastic headbands. NPF: 10.
Browguard with slip ratchet in polycarbonate Arc Pro to use in combination with the visors 225mm and 170mm for arc flash risks posed by electrical faults. This system is fully tested to protect up to 40cal/cm2.
Long John for ladies. Suitable for cold conditions. Quality: 51% Polyester / 47% Viscose Viloft / 2% Lycra. Available sizes: S-XXL. Available colors: White, grey and Black.
Surgical mask type II, provide users with superior efficiency and exceptional comfort. With their virucidal function applied by a new plasma technology that inactivates 99% of viruses. High efficiency for the filtration of bacterial particles. Extremely breathable. Can be worn for up to 8h. With earloops and nose clip, blue/white color. Packes in 2 bags of 25 masks in one box. Certified EN14683 TYPE II . MADE IN EU (Belgium).
DuPont ™ Tyvek® 600 Plus. Hooded suit available in white, sizes XS to 7X (also available in green). Robust and light (<(><<)>250 g per garment). Self-adhesive flap on the chin for optimal fit around the mask. Elastics around the face, wrists and ankles and elastic waistband. Elasticated thumb guard prevents the sleeve from rising. Tyvek® garments are made from high-density, high-density polyethylene, providing the ideal balance of protection, durability and comfort. Tyvek® is permeable to air and water vapor, while repelling aerosols and aqueous liquids. It provides an excellent barrier against fibers and fine particles (up to 1 micron), has extremely low particulate release and is antistatic. No silicone additions Tyvek® 600 Plus apparel applications include maintenance and dismantling of the nuclear industry, the pharmaceutical industry or research and biosafety laboratories, as well as medical applications and exposure to biological hazards. Certified selon Regulation (EU) 2016/425 Chemical Protective Clothing, Category III, Type 4-B, 5-B and 6-B EN 14126 (barrier against infectious agents) Antistatic treatment (EN 1149-5) - both sides Robust and protective seams (sewn and covered) Tyvek® Flap Closure for added protection Elasticated around the face, wrists and ankles for optimal fit and to reduce contamination and fluffing
Black powder-free disposable glove made of soft nitrile with extended cuff for extra protection of the wrist and forearm. Fully embossed for a reliable and consistent grip. Silicone and latex free and antistatic. The black color makes it easy to see if the hands have come into contact with potentially dangerous powders. The glove has been tested for phentalyl and stomach acid (vomit), simulating a dangerous overdose from practice. Suitable for use in the food industry. Length: 300mm, palm thickness: 0.14mm, finger thickness: 0.17mm. Sizes: (S) 6.5/7 - (XXL) 10.5/11. Complies with: EN ISO 374-1:2016 Type B: JKPT, EN ISO 374-5:2016 Virus, EN421
Earmuff for helmet, used with V-GARD helmets. SNR: 36dB.
Hi-vis sweatshirt PW379: Knitted cloth with brushed back; Stylish unisex design; Designed with a comfortable fit; neck protector; Ribbed cuffs for warmth and comfort; Segmented reflective striping; Certified to EN ISO 20471 after 50 washes; UPF 40+ fabric blocks 98% of UV radiation. Quality: 65% Polyester, 35% Cotton, 300g/m². Available colours: Fluo orange/black <(>&<)> fluo yellow/black. Available sizes: S – 4XL. Complies with: EN ISO 20471 class 2.
A warm and durable glove in our Freez range, well suited for cold environment work and freezer. The Guide GTX - Armor reinforcements in palm, fingertips, thumb and indexfinger makes the glove really durable. The elastic at wrist and the lined part towards the knitted cuff prevents cold air from entering the glove. The extra lining on back of hand gives this glove an exellent cold protection. Touchscreen at fingertips back of hand. Size 7-12.
Long Sleeve Polo 502.42: neck tape Rib knit collar Button closure with 2 buttons side seams Washable up to 40°C Quality: 100% cotton.
Welding glass in mineral glass. Dimensions: 51X108mm.
Cut resistant arm guard, with unique design so that the sleeve stays in place at hand level and does not curl up. With extra elastic at the wrist. In 13 gauge HXFIBR fiber mixed with polyester and ealstan for a good fit. Suitable for use with food. ESD approved according to EN16350. Available in sizes M-XL.
Low shoe in microfiber/cordura, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Made partly from recycled content; in lining, laces, insole and protected midsole. Sizes: D, 36-48 / XD, 39-48.
Rescue safety harness, easy to put on due to padding, easy-to-adjust straps, with revolving adjuster system on the chest straps, shoulder reinforcements with integrated anti-trauma straps, and large stand-up D-ring on the back, and quick closures. With 2 hooks on the shoulder straps for rescue from enclosed spaces (victim comes straight up), to be used with rescue harness spreader (art.1031078).
The Com4-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 200 pairs, each pair in a separate bag. Colours: light orange.
Dust mask, class P2, for harmful dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and re duce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 10.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. NPF: 4.
Dust mask, class P3, for toxic dust and ozon concentrations below the treshold limit value. Form-retaining thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands with closure. NPF: 50.
Nitrile glove with a sand grain finish on palm for a better grip. Version without lining, so the glove is ideal for production envir onments that are sensitive to external impurities. This glove is 33 cm long and 0.38 mm thick. Food approved.
Cold insulating glove with foam insulation and PVC coating. The roughened finish provides excellent abrasion resistance. This fluore scent, supple and ergonomically shaped model features a protective cap and is completely impervious to liquids. It is also dirty, fat and water repellent. Ideal in the chemical and petroleum industry and for work in cold stores, ports, public services or other env ironments where protection against cold is required. Anitstatic. Length: 27.5 cm.
Bib and brace trousers, 100% polyester ,150gr./m², waterrepellent, thermal lining in 100% polyester, 300gr./m², with adjustable clasps ,insulating, elastic on the back side , two large pockets on the front , zipper under flap with Velcro, reinforced knees, 1 horiz ontal reflective striping on the legs. Available in: navy.
Traffic cone made of polyvinyl chloride, fluorescent orange and reflective white. Height 75 cm, reflective white band around diamete r, black non-slip base, highly visible during the day due to fluorescent orange colour and at night due to reflective properties. Su itable for: general industrial applications.
Very effective hand cleaner for heavy soiling with oil, grease, soot, graphite, metal dust and lubricants! Contains skin-friendly abrasive granules made from refined walnut shell powder and is solvent-free. Hand cleaner without solvents for heavy soiling. Content: 250 ml tube. PPE category: not applicable.
500 mm strap for linkage between dorsal anchorage point and fall-arrest- block. For vertical use only, where the worker requires to attach or detach himself.
Jacket in 65% polyester/35% cotton, 245 gr./m² , 2 patched pockets with flap . Industrial washable and dryable. Easy-fit: model with very comfortable cut. Available in: grey with marine blue contrast elements on the pockets, royal blue with marine blue contrast elements on the pockets, marine blue with royal blue contrast elements on the pockets.
Cut resistant gloves knit from Zirnium® thread, length 25 cm.
Heat resistant glove Polysafe in Kevlar with water- and vapourproof nitril underglove. The Polysafe Multi keeps his isolating capacity until 350°C. Sizes: universal, 33 cm length.
Universal anti-fog visor (1.15 mm) made of cellulose acetate. Shape 2: width 450 mm, height 250 mm. For mounting on Lunar and Monteclipso.
Outer protective lens, heat resistant, for welding helmet 9100. Not separately approved as PPE.
A2 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65 °C. Can be used in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %. Suitable f or: processes involving chemical risks. Weight: 180g.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colour: blue.
FOOT PROTECTION / ACCESSORIES