BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 350°C for 15 sec.
The Moores rain pants offer good rain protection in harsh weather conditions. These light but strong pants are comfortable thanks to the pre-shaped knees, waist with belt loops and the narrowing at the leg ends. Velcro closure. For your convenience, the rain trousers were fitted with a zippered fly, 2 inset pockets with zipper and flap and 1 padded thigh pocket with flap. In these breathable pants you will never feel clammy during work. Quality: Siopor Light: 3-layer: 100% polyester ripstop + breathable TPU laminate + polyester mesh; ± 145 g / m² Available colors: Marine. Available sizes: S-3XL. Complies with: EN 343 class 3:3.
The Talia signalisation raincoat was therefore especially designed for them. With ergomic sleeves, underarm ventilation, an elastic cord at the waist and an elastic wristband with narrowing by means of Velcro closure was thought to comfort. The practical side also thought about a removable hood with elastic cord that can be stored in a special bag on the inside, 2 stuffed things, 1 sleeve pocket and 1 inside pocket. Quality: Siopor® Ultra: 100% polyester fabric with 100% PU coating; ± 195 g / m². Available sizes: XS-2XL. Available colors: Fluo yellow and fluo orange. Complies with: EN ISO 20471 class 3 and EN 343 class 3: 3.
Shirt with long sleeves. Quality: 68% cotton / 29% polyester / 3% elastane, Pin point Oxford, 110 g / m. Available sizes: XS-7XL. Available colors: Black, royal blue and navy.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable lin er in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 37-47.
Comfortable and lightweight slim-fit work trousers for women: - Raised back - Ideal for logistics work - Various storage options - Adjustable in waist Quality: 65% polyester / 35% cotton, 245 g / m². Available sizes: 32-46 NL. Available colors: navy, royal blue, dark gray, black and red.
Hi-vis parka: • wind and waterproof • taped seams • good breathability • detachable hood with adjustable rubber cord • two chest pockets with zippers • two front pockets with zip • D-ring in left breast pocket for ID card • three inside pockets • adjustable cuffs Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow / black, fluo yellow / navy and fluo orange / black. In accordance with: EN ISO 20471 class 3.
Low shoe in waterresistant, breathable Putek®, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 38-48.
Flame retardant coverall in Cantex Weld on the front and sleeves, and in Cantex Stretch on the back. Cantex Stretch gives the overall flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The coverall has increased visibility. Concealed front zip. Two walkie-talkie loops. Chest pockets with flap, right pocket with tool loops and concealed key ring for ID card holder. Side pockets with flap. Height-adjustable knee pockets. Back pockets with flap. Ruler pocket with flap. Adjustable cuffs with press studs. Elastic at the waist. Contrast stitching. Quality: Cantex Stretch, 365 g/m² + Cantex Weld, 365 g/m². Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1B1C1E3F1, EN ISO 11611 A1 Class 2, EN 1149-5, IEC 61482-2 Class 1 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 13034 type PB [6 ].
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The glove is fully coated with a double coating layer in the palm, for adequate protection against liquids and oils. Approved for contact with all types of food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
Full zip hoodie: • sweater and jacket at the same time • fur on the inside for extra warmth • hood with drawstring • large front pockets • knitted, elastic waistband at the bottom hem • reflective piping on the front and back Quality: 65% cotton, 35% polyester | inner side: 100% polyester, 430 g/m². Available sizes: XS-4XL. Available colors: Black, red, gray and navy.
High shoe in nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
T-shirt Fitted from the Rewear collection. Quality: 50% Organic Cotton / 50% Recycled Polyester, 160 g/m². Available colors: Dark Gray, Navy, Black and White. Available sizes: XS – 5XL.
Flame retardant and antistatic poloshirt Bladel with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Round sleeves; Segmented reflective tape (2,5 cm); Back length 74 cm (L). Quality: 55% Protex + 33% cotton + 10% p-Ar + 2% AST; ± 230 g/m². Available sizes: S-3XL. Available colour: Navy.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Black boot made out of Acifort. An excellent boot for numerous industrial applications. The shaft has good resistance to fuels, acids and alkalis. the sole is also resistant to oils and fats. Equipped with steel toecap and steel midsole. Antistatic. Sizes: 37-49.
High shoe in leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 36-49.
Class 2 welding protection, elasticated cuffs for a secure fit, designed to be worn in a harsh working environment, designed with a comfortable fit, CE certified, this product is sold in pairs, UKCA marked. Outer fabric: split cowhide, thickness 1.3 mm Sizes: one size Standards: EN ISO 11611 Class 2 A1
Firefighter boot in black water and firerepellant PBI fabric and microfiber, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on front and back in PBI. Specially designed BOA closing system. Sizes: 35-50.
The Com4-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 200 pairs, each pair in a separate bag. Colours: light orange.
Green plastic hearing protector with neck band made of combination of plastic and stainless steel. Allows simultaneous use of helmet s or other head wear. Universal size.
A2 filter protects against organic gases and vapours. Can be used in combination with the Adflo motor unit. If A2 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation on a single battery is desired. Class 2 gas filter: for max. concentration of 0.5%.
Replacement earplugs for X-cap (1015672 en 1032428). Sold in a bag of 5 pairs. Available in: lime yellow.
Cellulose acetate shield, clear, length 225 mm. For use in combination with helmet holder S54B (1000790)/S54P (1023799) and adapter 3711 (1001188)/P3EV/2 (1001189) for mounting on Centurion safety helmets. Packaged per 10 pieces. Marking: EN 166 1 F 9 3.
Low shoe in black full grain leather. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in PU/rubber. Sizes: 35-51
Goat leather gloves of super quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver (super quality) and Driver EC (standard quality).
Supple, wear resistant, silicon-free gloves made of nitrile coated gel foam with lining of knit cotton and rubber inner layer to dampen vibrations. Reduces susceptibility to hand-arm vibration syndrome (HAVS) during industrial activities to an absolute minimum. With Velcro closure.
A simple method for measuring the time-weighted average concentrations of gas- and vapour-phase air contaminants. The monitor must b e attached to the clothing, close to the breathing zone, during the work. The contaminants are absorbed by an active carbon layer. M onitor must be analysed in a laboratory at a later time. Measurement of: organic vapours. Shelf life: 18 months in sealed packaging. Does not produce alarm.
Oval snap hook made of steel. Automatic closure of the locking mechanism provides extra safety. Opening: 18 mm. Resistance: 25 kN. W eight: 180g.
The Com4-fit, with cord, has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate bag. Colours: orange.
Blue plastic work floor with black removable grid. Absorption capacity: 130L. Dimensions: 1260x860x150mm. Suitable for small packages. Corrosion-resistant. Weight: 20kg.
Absorbent pillows measuring 43 cm x 48 cm. These heavy-weight cushions are packaged in a box. Packaged per 16 pieces. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorbent pillows for regular leaks in the same place. Absorption capacity: 105 litres.
A2P3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65 °C, plus toxi c dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Light (340 g) safety helmet made of polyethylene with medium-length peak (neither short nor normal length). Quality and comfort are guaranteed due to the improved, permanently attached 6-point textile suspension with slide adjustment (51-63 cm), fitted with a highly absorbent sweatband, made of 2 mm thick brushed nylon. The additional neck protection not only provides increased protection but also improves the aesthetic aspects of the helmet and the visibility. You can choose from silver, fluorescent yellow or fluorescent orange versions. Thanks to the innovative combi-slot (European 30 mm + English Connect slot), you can attach various hearing and face protection accessories. The helmet is delivered in a vented version, with plugs for the vent holes. This makes the helmet suitable for use during both the summer and winter.
FOOT PROTECTION / ACCESSORIES
Set female and male coupling CEJN '342', 3/8"BSP. Equipped with screw thread. Combinable with compressed air hoses of 3M and filter unit AirCare of 3M.
Comfortable bump cap made of flame retardant Proban material, with modern 'casual' baseball cap look. Full peak. With woven ventilat ion opening along the side. Size: 54-62cm.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Splash suit made of blue laminate. Suit with attachedc hemically resistant Kemblok gloves. The pant legs have integral socksandstraight legsthat can bepulled over boots. The zipper is located on the back of the suit. The suit is designed to be worn over the compressed air equipment. Available in: blue. Sizes: S - XXL.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Transport box for full mask, such as Shogun. Equipped with practical shoulder strap. Ideal for dust-free storage of full face mask and filter, when they are not connected together.
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.
White clog OB in soft, white leather. Special sweatabsorbing lining with Silver Point. Very light antislip sole in PU with shockabsorption and resistant to gasoline. Removable insole. Treated sanitized. Step-in surface with elastic band and adjustable fastening buckle. Sizes: 35-48.
To create attachment point on tools. For material lighter than 2.3kg. Always use with Python Safety Quick wrap tape. Not PPE.
Hi-vis jacket in 65% polyester/35% cotton (245g/m²). Zip closure under flap, removable ID badge, phone pocket, pen pocket, chest pocket, elasticated waist. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Thermal shirt with long sleeves in 84% bamboo/11% spandex/5% polyester. Very good thermal properties in cold or medium cold environments, regulates humidity, permanent anti bacterial, flatlock seams, highly stretchable, perfect fit. Available sizes: XS-7XL. Available colours: black.
High shoe in microfiber, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% leather free. Sizes: 38-48.
Comfortable bumpcap made of cotton, withmodern 'casual' baseball cap with ABS shell. Reduced peak. Hat size adjustable from 60 cm to 63 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: black.
Lined winter glove with reinforcments in PU palm. Wind-and waterproof membrane makes sure that hands stay dry and warm. Glove has touch screen on the thumb and velcro strap at the wrist. Protects up to -10°C. Sizes 8-12.
Lightweight / Comfortable and breathable fabric, soft <(>&<)> supple / Inherently flameretardant properties / Very good moisture management properties / Non-allergenic and harmless to the skin / Reinforced seams for an increased durability and longer lifetime / Higher abrasion resistance / dimensionally stable / excellent pilling resistance. Quality: 31% polyester + 28% modacrylic + 20% aramid + 20% viscose FR + 1% AST. Available colors: Hi-Viz orange/navy. Available sizes: SHORT 48 - SHORT 58 - REGULAR 44 - REGULAR 64 - LONG 46 - LONG 56.
Compact safety knife for routine cutting tasks. The metal-detectable plastic handle makes it easy to trace. It's concealed cutting edge easily copes with single-layerd card-board, film and packing tape and keeps your fingers safe. To order by 10 pieces. No PPE.
High shoe in waterresistant black full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Sympatex liner. Outsole in PU/Vibram, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
Constructed from premium breathable Cotton Comfort fabric combined with HiVisTex Pro tape, this polo shirt offers excellent comfort and movement. It features a loop at the placket ideal for attaching glasses/pens. Quality: 55% cotton / 45% polyester. Available sizes: XS-3XL. Available colours: Fluo oranje/black, fluo orange/navy, fluo yellow/black and fluo yellow/navy.
Complete kit with Speedglas heavy duty welding helmet G5-01, welding filter G5-01TW, Adflo particle filter, adflo motor unit and carrying case.
Super strong Midi Parka with Cordura on sleeve and yoke piece for extra wear resistance. The Cordura fabric is made from nylon 6,6 fibers and the general feature is that it is resistant to heavy loads. This jacket is extremely suitable for robust outdoor use. Breathable, wind and waterproof with taped seams. Equipped with a double storm flap with a water barrier, a detachable hood, a concealed press stud fastening and an extended back. Warm and comfortable thanks to the inner collar with fixed microfleece and a removable thermal inner jacket. Practical with a vertical breast pocket with laminated zipper, lockable horizontal and vertical side pockets, concealed horizontal breast pockets and a concealed Napoleon pocket. Equipped with an inner pocket with zipper and ID badge and a cable entry for telephone or MP3 player, beard cap and printer zipper. Available sizes: XS-7XL. Available colors: navy, black, kining blue / navy, black / gray and kakhi / black. In accordance with: EN 343 3.3.
Skipper unit with 9m length. Dimensions: 240(H) x 145(D)mm Weight: 950g
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Parka Gore Tex Diablo multinorm: - 2 front pockets; - 1 napoleon bag; - 1 breast pocket; - 1 inner pocket. Quality: PES / CARBON WITH GORE PYRAD TECNOLOGY Available sizes: XS-3XL. Available colors: Fluo yellow / navy, fluo yellow / gray and fluo orange / gray. Compliant with: EN 343 4:4, EN ISO 20471 class 2/3, EN ISO 11612, EN ISO 14116, EN 13034 type 6, EN 1149-5 and IEC 61482-2 class 2.
- Chemical protection - Triple PVC coating - Very finger sensitive - Seemless knitted cotton liner 13 gauge - Sizes: 8-11 - Length: 30cm - EN388:2016 4.1.2.1.X - EN ISO 374-1:2016 Type B: AJK - EN ISO 374-5:2016
- Dexterity and robustness - Cold protection and heat contact resistance - Latex coating on the palm with excellent grip - Respects the natural shape of the hand - 10 gauge - Sizes: 7(S) - 11(XXL) - EN388:2016 3.X.4.2.B - EN511:2006 X.1.X - EN407:2004 X.2.X.X.X.X
Metal detectable safety knife with concealed blade, especially designed for cutting film and plastic strpping band. The concealed blade and rounded nose reliably protects you and your products. It has perfect ergonomics and the blade change is made very easy.No PPE.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. Fitted with adjustable, elastic headbands. Without an adjustable nosepiece (metal-free) and extra wide headbanf for more comfort and a secure fit.NPF: 50.
