Hand winch to assist with raising and lowering. Can be used in combination with Rollgliss set and Rollgliss tripod. Minimum reductio n required for use of the hand winch: 3:1 reduction. Weight: 3 kg.

Oxygen producing breathing apparatus with closed stainless steel carrying box with carrying belt. For very hazardous circumstances a nd/or places where a lack of oxygen may develop. Stored in a hermetically sealed, stainless steel carry bag with a strap for carryin g it over the shoulder. Works using an oxygen generating KO2 cell that can be replaced once it is used. KO2 cell is activated by fir st exhalation, responds to moisture and CO2 in exhaled air. Very maintenance-friendly, only requires annual test of seal. Working ti me: at least 90 minutes at consumption of 30 l/min. (escape), 300 minutes at consumption of 10 l/min. (rest). Shelf life: ten years. Weight: 4.9 kg.

Welding lens attachment for 3S full face masks. Spatter and welding lenses not included. Dimensions: 90 x 110 mm.

Y-piece for installation on compressed air hose, with one male and two female couplings. With non-return valve, makes it possible to split 1 hose into 2 hoses. Fitted with Rectus 96 couplings (NOT compatible with Rectus 96 short of lung demand valves).

1 rubber tourniquet 5 cm, 1 aromatic ammonia capsule, 1 pair Lister bandage scissors 14 cm, 6 sterile compresses 7 x 10 cm, 3 steril e triangular Calico bandages, 3 Cambric bandages (light) in cellophane 5 cm x 5 m, 6 Cambric bandages (light) in cellophane 7.5 cm x 5 m, 6 boxes compressed absorbent wadding 20g, 3 Stella Fix skin-coloured 1.25 cm x 5 m, 3 Stella Fix skin-coloured 2.5 cm x 5 m, 3 boxes Stella Plast 6 cm x 1 m, 6 bottles Stellachrome B 20 ml, 30 safety pins in a bag, 1 first aid instruction sheet (official tex t), 1 list of contents and part numbers for the products.

Emergency exit right. Rescue sign in polypropylene. Dimensions: 148x148mm.

First aid. Rescue sign in polypropylene. Dimensions: 148x148mm.

Fire alarm. Fire action sign in self-adhesive polyester. Dimensions: 200x200mm.

Hearing protection required. Mandatory sign in self-adhesive polyester. Diameter: 315mm.

Absorbent pads on 38 cm x 46 m sized roll, sheets perforated every 46 cm. These heavy-weight perforated pads on a roll are packaged in a box. Available per roll. The wipes are made from 3-ply melt-spun polypropylene. This means they do not absorb water and can per manently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and othe r water-insoluble chemicals. Absorption capacity: 94 litres.

Spill kit for larger calamities. The chemical and water resistant can contains the materials, which makes it ideal for outdoor stora ge. The container can be used to transport used material. Content: 100 pads (41 x 51 cm), 12 socks (7.6 x 122 cm), 8 socks (7.6 x 36 6 cm), 8 pillows (43 x 48 cm), 50 wipes, 1 pair of safety glasses, 1 pair of gloves, 10 disposal bags and 1 emergency response handb ook. Absorption capacity: 279 litres. The absorption material in the spill kit is of UN quality.

Safety gloves required. Mandatory sign in polypropylene. Diameter: 100mm.

Eye protection required. Mandatory sign in polypropylene. Diameter: 200mm.

Flexible, chemically resistant PVC sealing mat. Tightly seals off drain grates and prevents spilled liquids from draining away. As long as it is cleaned with a non-aggressive detergent, this mat is reusable. Dimensions:120X120CM

Anti-static absorbent wipes on 38 cm x 46 m sized roll, sheets perforated lengthwise every 23 cm. These heavy-weight double-perforat ed pads on a roll are packaged in a box. Available per roll. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the ab sorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 94 litres.

Absorption spill kit with an absorption capacity of 152 litres. Intended for medium-sized spills. Content: 50 pads (41 x 51 cm), 4 s ocks (7.6 x 366 cm), 8 pillows (43 x 48 cm), 1 pair of safety glasses, nitrile rubber gloves, 5 disposal bags and 1 emergency respon se handbook. The absorption material is of MRO quality. Packaged in a 200-litre chemical and water resistant drum.

Protective lens for the inside of Speedglas welding cassette 9100V. Not separately approved as PPE.

Automatic welding cassette with three automatically darkening welding filters. Width of welding filter: 45x93mm. Battery life: 2800 hours.

Automatic welding helmet with side windows from the 9100 series in durable, lightweight material. Good protection of ears and side o f neck, and better coverage of the throat against heat and welding sparks. Does not include cassette or headband.

Prohibition sign - Not drinking water in self-adhesive polyester. Dimensions diameter: 100mm. Not PPE.

Mandatory sign - Respiratory protection mandatory in self-adhesive polyester. Dimensions diameter: 100mm. Not PPE.

Warning sign - Caution Danger in self-adhesive polyester. Side Dimensions: 200mm. Not PPE.

Rescue sign - Assembly point during emergencies in self-adhesive polyester. Dimensions: 200X200mm. Not PPE.

Glass for bochumer glasses in blue neotherm glass. Suitable for melting furnaces. Dimensions: 60x120mm

Automatic welding filter in shade 8-12 for 100 series (compatible with 3M H751100).

Prohibition sign - No smoking in self-adhesive polyester. Dimensions diameter: 050mm. Not PPE.

Prohibition sign - No transport vehicles in self-adhesive polyester. Dimensions diameter: 200mm. Not PPE.

Rescue sign - Assembly point during emergencies in polypropylene. Dimensions: 250X250mm. Not PPE.

Replaceable headband for 3M™ Speedglas™ Welding Helmets 100, 9000 and SL, if the original headband becomes worn or damaged during use. Assembly parts included.

Absorbent pads on a roll measuring 96 cm x 44 m. These heavyweight perforated pads on a roll are packaged in a bag. Available per roll. The wipes are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 274 litres.

Absorption mat, 147 cm x 24 m. Heavy weight absorption mat. Absorbs oil and petroleum-based products. Consists of a reinforced upper layer and a non-slip underlay that keep the mat in place and prevents seepage. The UV resistant upper layer allows outdoor use. This absorbent mat can be combined with strips that hold the mat in place. Absorption capacity: 207 litres for 1 roll.

Prohibition sign - Not drinking water in self-adhesive polyester. Dimensions diameter: 200mm. Not PPE.

Red Box for key access. Dimensions: 15x12.5x2cm. Reeds to be ordered separately with the article number 1056943

Handy gas tester for gas test tubes. The diaphragm relaxes to suck air in through the tube. This robust manual design is always ready for use and can be operated with one hand. Ideal for environments such as the inland waterways.

Fire fighting sign - Extinguisher hose in polypropylene. Dimensions: 315X315mm. Not PPE.

Fire fighting sign - Extinguisher in polypropylene. Dimensions: 315X315mm. Not PPE.

Absorption cloth with dimensions 38 cm x 48 cm. These lightweight cloths are packed in a box. Available per 100 pieces. These cloths are made from recycled materials and to absorb 50% more than polypropoyleen canvases. Ideal for absorbing all industrial fluids, including oils, water, solvents and coolants. Absorption capacity: 90 liter.

Absorption cloth with dimensions 38 cm x 48 cm. These lightweight cloths are packed in a box. Available per 100 pieces. These cloths are made from recycled materials and to absorb 50% more than polypropoyleen canvases. Ideal for absorbing all industrial fluids, including oils, water, solvents and coolants. Absorption capacity: 121liter.

Charger 12-24V gas detector for Gasalertmicroclip, Quattro and MAX XT to charge in the car.

Sign according GHS normation in self adhesive polyester: health hazard. Size: 70x70mm. 6 labels per card. No PPE.

Sign according GHS normation in self adhesive polyester: Hazardous for aquatic environment. Size: 40x40mm. 20 labels per card. No PPE.

Sign within GHS normation in self adhesive polyester: explosive. Size: 100x100mm. 4 labels per card. No PPE.

Sign according GHS normation in self adhesive polyester: oxidising. Size: 100x100mm. 4 labels per card. No PPE.

Sign according GHS normation in self adhesive polyester: flammable. Size: 40x40mm. 20 labels per card. No PPE.

Sign according GHS normation in self adhesive polyester: acute toxicity. Size: 40x40mm. 20 labels per card. No PPE.

Prohibition sign - No mobile phones in self-adhesive polyester. Dimensions diameter: 100mm. Not PPE.

Mandatory sign - Hand wash mandatory in polyester. Dimensions diameter: 100mm. Not PPE.

Machine Safety sign - Please beware of hand injuries in self-adhesive polyester. Side Dimensions: 100mm. Not PPE.

Warning sign - You are entering an explosive atmosphere in polypropylene. Side Dimensions: 200mm. Not PPE.

Warning sign - You are entering an explosive atmosphere in self-adhesive polyester. Side Dimensions: 200mm. Not PPE.

Warning sign - Dangerous electrical voltage in self-adhesive polyester. Side Dimensions: 025mm. Not PPE.

Warning sign - Caution Danger in self-adhesive polyester. Side Dimensions: 100mm. Not PPE.

Fire fighting sign - Fire alarm in polypropylene. Dimensions: 315X315mm. Not PPE.

Saving signs in self adhesive polyester - First Aid. Measure: 250x250mm.

Screen carrier helmet with spectacle for Schubert helmets.

Neck cape for Pyroshelmet in Aluminium. No PPE.

Carrying case for Ultra Elite masks. Equipped with a handy shoulder strap. Ideal for the filter and mask to protect against dust. Dimensions: 318mm x 180mm x 232mm.

Lightweight breathing hood made of WEB 22 with PE visor. WEB 22 material captures paint particles, preventing the paint particles on the wearer from getting onto the work piece. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For spray painting applications, special raw material of hood and visor can be cleaned with thinner. Weight: 315 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.

Seamless knitted nylon glove with white PU coated fingertips. For microelectronics, packaging, archiving and precision work. Sizes: 6, 7, 8, 9.

Oil absorbing drum top mats. Keeps the top of drums and surroundings clean and dry. Diameter: 56cm. Packaging: 25 items per box. Absorption capacity: 26L.

OIL PLUS… The most popular oil absorbing rolls in the range. The perfect choice for general maintenance work!… or underneath/alongside machines for absorbing small leaks and splashes. Absorbs oil, paraffin, hydrocarbons and other oil-based liquids. Low-lint spun fleece top layer makes the product stronger. Suitable for applications which require a strong absorption medium with high absorption capacity. Ideal for absorbing machine vapour and spray or capturing splashes and leaks during maintenance work. Roll, 38 cm x 22 m Heavyweight, double-perforated <(><<)>(><(>&<)><(><<)>)> bonded Absorption capacity 45L

Oil absorbing sock, ideal for absorbing leaks around machines. Dimensions: Dimensions: diameter 7.6cm x 366cm. Packaging: 4 socks/box. Absorption capacity: 43L.

Absorbent pads on a roll measuring 96 cm x 44 m. These heavy-weight perforated pads on a roll are packaged in a box. The wipes are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 213 litres.

The MRO Plus towels are very effective for absorbing and removing oil and water-based fluids. MRO Plus is a top quality, padded fabric. Thick, strong and with great absorbency. Suitable for almost all industrial applications. The perforations allow you to use as much as you need. The grey colour conceals the dirt, so that it can be used for longer. Roll of cloths 76cmx46m double-perforated every 38cm.

Measuring tube to be used in combination with hand pump to measure concentration.

Measuring tube to be used in combination with hand pump to measure concentration.

Measuring tube to be used in combination with hand pump to measure concentration.

Measuring tube to be used in combination with hand pump to measure concentration.

Measuring tube CO-HP.

Measuring tube CO2-HP.