BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Flamirins is an isotonic solution for cleaning wounds. (250ml) Indications: Promotes wound healing by removing necrosis Cleans the w ound mechanically Moisturises the wound Neutralises disinfectants Removes adhered compresses Content: 250ml
First-aid kit Medi Multi Yellow without filling incl. Wall bracket. Dimensions: 32 x 22 x 13 cm.
Backpack 100% made of cotton with two compartments. The main compartment has an inside pocket for MP3/Ipods and a grommet for earphones. Extra compartments available for pens or phones, together with two draw strings on the side. Content: 26 liters. Measurement: 30 x 43 x 22 cm. Available colors: black, blue and red.
Rain jacket in light stretch material: • wind and waterproof • taped seams • waterproof front zip • internal storm flap • chin guard • side pockets with zip • segmented tires with stretch • thumb grip on the cuffs • extended back. Quality: 100% polyester, 140 g / m². Available sizes: XS-3XL. Available colors: Fluo yellow / black. Conforms to: EN ISO 20471 class 1.
Mandown alarm in the form of a compact GSM device. Supplied with charger, USB adapter, USB cable and clip for wearing on your belt. Can also be worn on the arm or around the neck with accessories that can be supplied separately. Provides automatic alarm via SMS or call to max. 10 pre-programmed telephone numbers. Alarm is activated by a lack of movement or absence of movement through a specific angle (horizontal or vertical). Alarm can also be activated manually via a separate button. Always gives an initial alarm that can be overridden in order to avoid false alarms. Once alarm calls have been processed, there is a signal of 110 dB which allows the person to be located. Works on basis of SIM card. Initial configuration and all settings can be amended via free software downloaded from www.twigcom.com. With GPS location option that can send a Google Maps link via SMS (works best outside buildings).
Comfortable half mask in TPE with replaceable A1P3filters . Sizes: S/M and M/L.
The BHV first aid kit large Luxe is a very extensive first aid kit (including wall holder). The shelf life of the products is on average 4 years. In the BHV First aid kit large Luxe, a color guide can be found that identifies various injuries. This first aid kit contains a basis for the most common first aid procedures. Size: 32 cm x 22 cm x 13 cm.
A very practical first-aid kit. In the emergency first-aid kit small Basic, a color guide can be found that identifies various injuries. For each injury it is clearly indicated which first aid should be provided (including wall bracket).
Black clog made out of microfiber with steel toecap. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 35-42.
Low shoe in white synthetic material, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Overboot in ultra chemical resistant and antistatic material (Hazmax). Outsole in yellow Hazmax compound, with a perfect slip resistance and oilresistant. Forseen with a heel part, excellent for climbing ladders. Fixing by two buttons for a perfect fit, wide shaft for ease entry and fitting.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing. Sizes: 8-12. Lenght: 410 mm Certified Category R/C. ATPV 25cal/cm²
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing. Sizes: 8-12. Lenght: 460 mm Certified Category R/C. Arc Flash score EBT: 88 cal/cm²
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing.Sizes: 8-11. Thickness: 1,5mm, Lenght: 360mm Certified for resistance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C).
Polo piqué with three-button placket, neck ribbon, side slits and ribbed cuffs. Quality: 60% cotton, 40% polyester, 200 g / m². Available sizes: S-5XL. Available colors: White, dark gray, red, navy, blue, green, black and dark gray.
Work trousers Taltiu: - standard tricolor waistband; - knitted front piece on each leg; - multipocket; - kneepad pockets. - Stretch elements M-Move - Industrial laundry Quality: 65% recycled polyester, 35% Lyocell cotton. Available colors: Gray / black and gray / yellow. Available sizes: 38-68 BE.
Stretch shorts: • stretch material on the seat, crotch and inner thighs; • two leg pockets with zip; • two back pockets with flaps; • hidden button. Quality: 65% polyester / 35% cotton, 245 g / m². Available colors: Black, Navy, Light Blue, Red, Green and Gray. Available sizes: C44 - C62 EU.
The 100 Series offers a popular sporty lens design, adding a fresh look to the SecureFit family of safety glasses. These lightweight safety glasses feature 3M’s innovative temple design with slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. In addition, SecureFit 100 Series flat and flexible temple design combines well with 3M™ Protective Earmuffs.
Harness to carry fan units SR500 EX on the back. No PPE.
Low-cut shoe made of velours, fitted with a 200J toecap. With liner in Climazone in antiperspirant textile and comfortable insole providing extra protection against mildew and heat. Sole made of PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Hi-vis polo with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Long sleeves; Flame retardant reflective tape. Quality: 54.5% modacrylic + 44.5% cotton + 1% AST; ± 220 g / m². Available sizes: S-4XL. Available colours: Fluo yellow. Compliant with: IEC 61482-2: 2009 class 1 - EBT 7.4 cal / cm², EN ISO 11612: 2008 / A1 B1 C1 F1, EN ISO 14116: 2008, EN ISO 20471: 2013 / Class 3 and EN 1149-5: 2008.
Multinorm FR76 long sleeve polo: The inherent flame retardant qualities will not diminish; Premium flame retardant reflective striping; Ribbed cuffs for warmth and comfort; 100% Metal Free; UPF 50+ fabric blocks 98% of UV radiation; antistatic; Keeps its shape. Quality: Modaflame HVO Knit: 66% Modacrylic, 32% Polyester, 2% Carbon Fiber 220g. Available sizes: S-3XL. Available colours: Fluo orange. Complies with: EN ISO 11612 A1, B1, C1, F2, EN 1149 -5, EN ISO 20471 Class 3, IEC 61482-2 IEC 61482-1-2 Class 1 and IEC 61482-2 IEC 61482-1-1 ATPV 6 CAL /cm2 (HAF 71.7%).
The SnareIt™ no touch hand safety tool eliminates finger and hand exposure to the danger zone while safely maneuvering pipe or other like cylindrical-shaped equipment. Length: 48 inches. Loop diameter: 8 to 18 inches.
This super light coverall offers excellent flame retardant protection. The Araflame coverall is soft and breathable but has great tensile and tear resistance. Perfect for use in industry including the oil, gas and petrochemical industries. The coverall features three-needle stitching, secure pockets and an elasticated waist for easy movement. Quality: Araflame Plus 93% Meta-aramid, 5% Para-aramid, 2% Carbon Thread 150g. Available colours: navy and orange. Available sizes: 38-54 PW. Complies with: EN 1149-5 and EN ISO 11612 A1+A2, B1, C1, F1.
Water-and windproof rain jacket with PU coating. 2 slant pockets, 1 chest pocket, 1 sleeve pocket and inside pocket with zip fastening. Zip fastening with stormflap, elongated back and removable lining. Available sizes: XS-7XL. Available colours: hi vis yellow/navy, hi vis orange/navy, hi vis orange/green.
Electrician protective face screen with hood according to PPE-regulation 2016/425 and corresponding to DIN + EN standards (especially DIN EN 166 and GS-ET 29, class 2 (7kA 0,5s) and class 2++ (10kA 0,5s), Light transmission >50% <(><<)> 75% = class 1; CE 0340; With ATPV label 17 cal/cm². Dimensions: Total: 450x250 mm Screen: 250x165 mm Quality: Hood: NOMEX inside antistatic, NOMEX III outershell antistatic Screen: Polycarbonat in line with: EN 166+EN167+EN168:2002-04, EN 170:2003-01 and GS-ET 29:2019-06. Available colours: blue Available sizes: one size
Loggers working gloves with mechanical resistance in 100% goat leather with nylon and spandex inserts in red color. They provide great dexterity and grip. They have a perfect fit, and impact and vibration foams in the palm of the hand. Sizes: 8-12.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a liquid-tight palm and an airy top. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Disposable safety knife with a safe hidden blade, especially for cutting foil and paper in the food industry. Metal detectable blue plastic with stainless steel blade. No PPE.
Metal detectabel cutter, easy to clean, for left- and righthanded. Enclosed blade. Ideal for cutting straps, plastic bags, shrink wrap, paper bags. Disposable cutter, no replaceable blades. No PPE.
Modern, fitted bicolor lady t-shirt with ribbed neck in four layers and elastane in the hem. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. The fabric is ring-spun and post-treated with an enzyme wash, making the material pre-shrunk and soft to the touch. Oeko-Tex 100 certified. Quality: 50% organic cotton, 50% recycled polyester, 180 g/m². Available sizes: XS-2XL. Available colors: BLUE/Navy, Navy/Blue, Black/Red, Black/Orange, Black/Grey and Gray/Black.
Bicolor lady sweat jacket with contrasting zip on the front and on the side pockets. Contrasting neck tape. 2x2 rib with elastane at the bottom hem and at the cuffs. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Zipper pullers in contrast color. These can be replaced by one of the other available colors if desired. Oeko-Tex 100 certified. Quality: 50% organic cotton, 50% recycled polyester, 280g/m². Available sizes: XS-2XL. Available colors: Blue/Navy, Navy/Blue, Black/Orange, Black/Red, Black/Grey and Gray/Black.
Electrician protective face screen with with hood and continuous flap. According to PPE Regulation 2016/425 and according to DIN + EN standards (in particular DIN EN 166 -170 and GS-ET 29, Class 2 (7kA 0.5s) and Class 2++ (10kA 0.5s), Light transmittance ~ 48% = class 2). Arc class: 2++. With ATPV label 35 cal/cm² Hood material: Double layer S451 Indura Ultrasoft 325g/m². Screen dimensions: 250 x 165 mm.
Signalization polo with mesh under the arms for maximum ventilation. Very light, moisturizing, strong and supple. Welded and segmented reflective tapes. The polo has a permanent anti-bacterial effect that fights odors. Quality: Sio-Cool Comfort: 100% polyester; ± 130 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: S-3XL.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 42 inches. Material: Rubber.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW FLEX and BW ICON Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
The Basic Outerwear Silver Ion treatment fights odors and improves the lifespan. The outerwear fits well for optimal moisture removal and is suitable to wear during all seasons. Quality: 93% Moisture Wicking Polyester,7% Elastane Silver, 165g/m². Available sizes: S-2XL. Available colours: Black.
Sweater bicolor seams: Round neck, Sleeve cuffs, Dryer resistant, American fleece, Cotton/Polyester, Bi-colour, Bicolour, Sweaters, 60 °C, Construction, Pa inters <(>&<)> Plasterers, Transport <(>&<)> Logistics, Bicolour Seams, 60°C washable. Quality: 70% Cotton / 30% Polyester, 280 g/m². Available sizes: XS-8XL. Available colors: Navy/Royal Blue, Navy/Black, Black/Grey, Black/Orange, Black/Red and White/Black.
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the work trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have nail pockets. Quality: Cantex Weld, 365 gsm. Sizes available: 44-64, 146-156, 96-120 EU. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, IEC 61482-2: APC 1, ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm².
Very robust and strong rescue glove with extreme protection levels, designed for firefighters and rescue teams, suitable for heavier rescue operations at accidents, (natural) disasters, etc. such as clearing debris, breaking up wrecks, etc. but also in various industrial applications. Sizes: 6-13.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option and not for 3-year life detectors!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: 3 YEARS CO with alarms at 20PPM and 100PPM. Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Kernmantel restraint lanyard 1.5m with a twist lock karbiner and a steel GO55 Scaffold hook. Only suitable for positioning.
Filter adapter for fan unit SR500.
Gas filter ABE1 for use with motorunit SR500 / SR500 EX , protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic, acidic gasses, vapours and ammonium. Per motor unit there are 2 flters needed.
Breathing apparatus M1 basic with fixed lung demand valve, and basic backplate, harness without padding, classic line, manometer. To combine with masks 3S Maxx, or G1 Maxx, and for use with 6L(6,8L)/300BAR cilinders. Weight without ciilinder: ca 4,63 kg. working time: ca 45 min. NPF: 50.000.
Helmet hearing protector Sana 34 for safety helmet CENTURION.
A durable neoprene glove with great dexterity and excellent grip. The glove is comfortable and flexible due to the preformed fit and the Velcro at the wrist ensures that the glove stays in place. The glove has a touchscreen function and excellent grip in the palm thanks to the Guide Grip Pattern. Padded palm and thumb/index finger reinforcement for a long glove life. Sizes: 7-12. Complies with: 2.1.2.1.X, EN511: X.2.X, EN407: X.1.X.X.X.X
High shoe Glove in nubuck leather with aluminium toecap and a synthetic anti-perforation sole. Equipped with TPU heel reinforcement and scuffcap. Inner lining in breathable textile and insole in polyurethane foam. Sole in PU/Nitrile, resistant to 300°C. Sizes: 35-48.
Signa waistcoat in 100% polyester (120g/m²). Without reflective bands. Available sizes: S/M and L/XL. Available colours: royal blue, red, lime, white, fluo yellow and fluo orange.
Earmuff helmet WS Alert XPI with built-in FM radio receiver, Bluetooth and level dependent function (surround). The Bluetooth® Multipoint Headset with Noise Canceling Microphone connects to a mobile app to make it easier to set up and customize the headset while wirelessly connecting two Bluetooth devices, such as a cell phone and a walkie-talkie. The headset helps protect you from dangerous noise, but also makes it easy to use both hands free on the phone in noisy environments. SNR: 30dB. In accordance with: EN352-3.
Super-light safety helmet for working at height, with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) with MIPS and sweatband. The Nexus Extreme Mips combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is required. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
High shoe safety shoe S3 in black full grain leather with uvex waterstop technology. 200J synthetic toecap, steel anti-perforation sole and scuffcap. Fitted with a breathable textile lining. Padded tongue and removable, antistatic insole, moisture absorbent. Sole made of PU/PU: suple and lightweight, oil and petrol resistant, slipresistant. Sizes: 35-52 (10, 11, 12).
Cederroth soft foam dressing blue 4,5m works both as plaster and bandage and is suitable for small wounds. Easy to apply to fingers, hands, arms, toes, feet and legs etc. Suitable for all types of small wounds in hot, cold, wet or dry conditions and holds well in water.
The Evercushion® Custom Fit footbed combines comfort with fit. It is available in three variants, each with a different anatomically shaped arch. The breathable PU foam provides excellent shock absorption and excellent climate control. The antibacterial Hypro Odor Control® coating prevents unpleasant odors. No PPE.
Spectacle with light brown CBR23 PC lens with Supravision Excellence coating: anti-scratch (outside) and anti-fog (inside). Has ajustable side-arms and nose. Fits perfect onto the face. X-tended sideshield for increases side protection Color: black/white.
Low shoe in microfiber, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-49.
Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 8-1-0 9 KN.
Fire blanket specially developed for controlling battery fires. The fire is smothered immediately after the fire blanket is placed over the burning vehicle/battery. In the event of a battery fire, the battery will continue to burn, albeit in a controlled manner, resulting in less smoke and heat production. Also suitable for limiting a spontaneous battery fire during charging. Transport bag included. Dimensions: 250x300cm. Comes in a metal wall box.
Low shoe in waterrepellent split leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable 3D polyester and insole in polyurethane foam. Sole in PU/PU. Sizes: 35-42.
High shoe in waterrepellent split leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable 3D polyester and insole in polyurethane foam. Sole in PU/PU. Sizes: 35-42.
Clip to attach goggles to the Pheos helmet. Is also a clip to attach a chinstrap to the Pheos Alpine helmet. No PPE.
Very fine and cut resistant glove (43.9N) designed for fine work with high cut risks. Can be washed up to 5 times at 40°C without loss of efficiency.
