BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Safety helmet made out of ABS with integrated visor. Has a 6-point textile cradle (53-64cm). Available in: white.
PFAS free and inherently flame retardant work jacket in Cantex Weld on the front and sleeves, and Cantex Weld/Cantex Weld Stretch on the back. Available sizes: XS-4XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
Fireproof battery bag to safely transport, store and charge the battery of an electric bicycle. If the battery should ignite, the damage will be limited to the bag and the battery. Tested with Li-Ion batteries up to 400W). imensions: 540x130x120 mm
Low shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
The Frovik is a bomber jacket which you can wear in many situations. The fluorescent colour and segmented striping will keep you safe in any light conditions. The Siopor Excell fabric protects you against the rain and against many industrial hazards including the thermal risks of an electrical flashover. A surplus is the light weight of the fabric. The bomber jacket comes with a flame retardant fleece lining (index 3) which can also be removed. The wind is kept out by the elastic wrist bands that can be narrowed and by the standing collar to which a hood can be attached. The separately available hood can be stored in the special purpose inside pocket. Class 2 ARC protection can be obtained by combining the bomber jacket and the fleece lining.Complies with: IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5, EN 13034, EN ISO 20471, EN 343, EN 61482-2, EN ISO 14116 and EN 14058. Available sizes: S-3XL Available colours: Yellow-Navy, Orange-Navy
Safety glasses with orange/black frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. With foam and elastic headband. Polycarbonate lenses with an anti-scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes. Not supplied with glasses cord (can be ordered separately: 1034594).
Fire blanket specially developed for controlling battery fires. The fire is smothered immediately after the fire blanket is placed over the burning vehicle/battery. In the event of a battery fire, the battery will continue to burn, albeit in a controlled manner, resulting in less smoke and heat production. The Premium blanket can be used multiple times. Comes in a transport bag. Constant temperature resistance utp to 1000°C (short tem up to 1300°C)
Sweatband, made out of Chamlon. Is PH-neutral. Suitable for Evo helmets (Does not fit Evo8).
Low shoe in Safety Knit® Green textile, made out of recycled PET-bottles and polyester fibres. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. Breathable, functional lining. Outsole in EVA/Nitrile, resistant to 300°C. Removable, polyurethane insole with textile layer. Sizes: 36-47.
Carrying strap for (trainer) self rescuer M40 SCR.
Complete kit with SR 500 fan unit and protective helmet SR 570, 1 protective film, standard battery, battery charger SR513, belt SR508, 2 pieces of SR510 P3 particle filters, 2 filter adapters, 10 prefilters SR221, 2 prefilter holder, flow meter, plug kit, cleaning tissue and user instructions. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Purple nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
Highly robust drop and water-resistant lamp developed for police forces. Powerful output of 3300 lumens gives good images up to 705 metres away. With USB charging option and battery indicator. Easy to operate with 1 hand, even with gloves. Comes with lanyard, pouch, clip,spare o-ring ,USB-C cable. Includes NL2153HP battery, charger to be ordered separately.
The 3M™ Speedglas™ G5-03 Pro Welding Helmet is specially designed for the versatile welder. This helmet allows you to switch between welding and grinding work thanks to our new Tap functionality. With extensive adjustment options, including more control over how you view your weld pool and how you configure the helmet for extra protection against radiation, sparks and splashes, the G5-03 puts you in control of your protection. With 3M™ Speedglas™ Natural Color Technology, Variable Color Technology (with G5-01/03VC) and a tack welding mode (with G5-01/03TW).
Steel carabiner automatic closing, opening 22 mm, weight: 230 gr. Breaking force: 40kN.
ZOLL AED Plus, Type 123 lithium batteries, 10 pieces with storage sleeve. Suitable for the Zoll AED Plus semi-automatic (1060426) or the Zoll AED Plus fully automatic (1060427).
High shoe in nubuck, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole. Made partly from recycled content; in lining, laces, insole. Sizes: D, 36-48 / XD, 39-48.
Professional Indoor Neyfik spray fire extinguisher class 5A / 21B / 5F. Very compact and effective extinguisher suitable for oil fires, other burning liquids and solids. The spray is supplied with a wall holder. Each spray extinguisher also contains a check schedule that, if desired, can be used to perform periodic checks. The spray extinguisher is completely maintenance-free and has a lifespan of 5 years. The spray is supplied with a wall holder. The spray can be combined with a vehicle holder (Art. 1045093). This model only contains a Dutch text including a control schedule. This model is also available with French text excluding control scheme (art. 1045090).
Wall dispenser for boxes of X-fit and Com4-fit.
Protection against cuts and 360 ° around the forearm, combined with additional protection to the back of the hand. thumb manchette for better comfort. Elastic band behind the elbow with anti-slip rubber. Elastic material into two-way stretch for better comfort
Battery charger for the rechargeable battery ACK053, 230V, suitable for Peltor Lite-Com Pro models. Used with power supply FR08 (1027638). Not separately certified as PPE.
Peltor ALERT is the ear muff that allows you to still hear surrounding noises, so you won't be isolated. Two sensors track all the ambient noise below 82 dB: loud noises are reduced, soft sounds amplified. On top of that you can listen to radio stations on FM and AM frequencies.
Soft cotton spare sweatband for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. 3-piece packaging. No PPE.
High shoe in black textile composed of high tenacity polyamide. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in EVA/VIBRAM. Sizes: 35-50.
High shoe in microfiber/polyester (made from recycled PET bottles) with synthetic anti-perforation sole with a composite protective toe cap. Equipped with a bamboo and recycled polyester lining that is resistant to abrasion. Sole in PU/PU. Antibacterial Memory Foam sockliner. Sizes: 35-50 Conforms to: EN ISO 20345:2022 S3S CI FO SR.
Dupont Tyvek® 500 HP (Harness Protection) TY178S HP coverall with four D-ring sleeves attached to the garment.
High vis t-shirt 7518 with short sleeves, class 1.
Hi-vis sweat jacket 4517, class 1.
Fire-resistent seal for the head shell as accessory of hoods M-106, M- 107, M-306, M-307. No PPE.
Lanyard, 2 metre length, 43mm width consisting of elastic strap with integratedshock absorber. Non-stretched length of the Lanyard is 1.2 metres, which enables better manipulation of the Lanyard. Fitted with 1 standard carabiner and 1 scaffholding carabiner. Serves as connection between anchor point and harness.
Extremely flexible glove in natural rubber latex. operating voltage of 750 volts, test voltage of 2.500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. length 360 mm.
Extremely flexible glove in natural rubber latex. operating voltage of 1000 volts, test voltage of 5000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 360 mm.
Electrically insulating glove with mechanically strong resistance. Protects against risks of Arc Flash. Outside in black, inside in red, outside has a non-slip coating. working voltage of 1000 volts, test voltage of 5000 volts. Length 360 mm, Sizes: 7-12. In accordance with EN60903 class 0 cat RC. ASTM F2675: 25 cal/cm²
Tripod with tubular aluminium legs for lowest possible weight. Four eye bolts in the head that can be used as anchor points. Tripod is adjustable from 1.35 to 2.35 metres. Tripod is meant for two people, with a total weight of 500 kg. To be used in combination with winch and rescue set Rollgliss or SRL Weight 14.5 kg. Without carrying bag: 1003772.
Ultra-light glove 21 gauge for unparalleled comfort and dexterity with very high cut protection (F).
Neoprene rubber chemical jacket. The zipper has a double flap with Velcro, and the sleeves have a unique attachment system for glove s. The chemical jacket also has an extended collar. This jacket can be used in combination with the neoprene trousers. Available in: yellow. Sizes: S - XXL.
Coverall, 100% polyester, 150gr./m², water repellent, thermal lining in 100% polyester 300gr./m²,insulating, elastic on the back side foroptimalwearing comfort, two large patched pockets with flap, one chestpocket with flap en ID-pocket, zipper under storm flap with velcro closure, reinforced knees and legs, zipper under flap with Velcro from knee to bottom, 1 horizontel retor-reflective striping on the chest, back end both legs. Available in: navy.
ATTENTION! Article is converted to 1006098 - case Toolpac A
Absorbent pads measuring 41 cm x 51 cm. These medium-weight perforated pads are packaged in a box. Packaged per 100 pieces. The wipe s are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for abs orbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorptio n capacity: 102 litres.
Liquid-proof gloves made of jersey coated with high-quality neoprene. High mechanical resistance and resistant to a wide range of ch emical products.
Sporty goggles, derived from the successful Uvex ski goggles. Successor to the Ultravision 9301 PC. Very comfortable, good protective coverage thanks to the DCT technology. Using a specially designed clip (not included, Uvex ref. no. 9924.010/VDP: 1000249). Glasses with limited ventilation, can be combined with helmet and hearing protectors. Frame colour: grey/blue. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes Supravision Extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
Clear tri-acetate face shield (225 mm). Suitable for use on the Centurion Vulcan using the optional, ingeniously devised, multi-func tional face shield holder S57.
Sporty goggles, derived from the successful Uvex ski goggles. Successor to the Ultravision 9301 PC. Very comfortable, good protective coverage thanks to the DCT technology. Glasses with limited ventilation. Frame colour: orange/green. Fitted with grey PC lens: as with all Uvex PC lenses, the grey-tinted lenses also provide 100% protection against harmful UV radiation up to 400 nanometres. The grey tint also filters portions of the visible spectrum and therefore offers protection against blinding caused by intense sunlight, etc. The recognition of signal colours remains unimpeded. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Blue lightweight and sporty safety glasses with a perfect pression-free fit. Adjustable temples. Fitted with grey PC lens: as with all Uvex PC lenses, the grey-tinted lenses also provide 100% protection against harmful UV radiation up to 400 nanometres. The grey tint also filters portions of the visible spectrum and therefore offers protection against blinding caused by intense sunlight, etc. The recognition of signal colours remains unimpeded. With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Air supply system for use with compressed air line in combination with 3M half-face or full face masks. Also makes it possible to mo unt filters on half-face or full face masks for situations in which supply from compressed air line is cut off or for protection und er a decontamination shower. If no filters are mounted, overpressure valves C-340 must be installed (these are provided). Only appro ved in combination with air hoses C-251, C-252 and C-253. Fitted with air regulator for adjusting the flow rate. Not for use in conf ined spaces. Working pressure: between 3 and 7 bar. NPF with half-face mask: 50, NPF with full face mask: 200.
Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.
Trousers, aluminized carbon/para-aramide, 540 gr./m², lining in cottonProban, fly-closure with press-studs, 2 side slits under flap, seams stitched with Kevlar ®. Sizes: M - XXL.
Escape hood on compressed air for very toxic conditions and/or places where can be a lack of oxygen. The escape mask consists of a hood with an integrated rubber half-mask. The bag contains a 3 litre, 200 bar metal filled air cylinder. As soon as the bag is opened, the breathing air is automatically activated. While wearing the mask, the user sees a continual indication of the amount of escape time that remains. Bag can be used to carry escape set while it is closed or opened. Working time: at least 15 minutes. Weight: 6 kg. Flow rate: approx. 35 l/min.
Oxygen producing self-rescue set with mouthpiece and nose bridge, for very hazardous circumstances and/or places where a lack of oxy gen may develop. Stored in a hermetically sealed, stainless steel carry bag with belt loops. Works using an oxygen generating KO2 ce ll that can be replaced once it is used. KO2 cell is activated by first exhalation, responds to moisture and CO2 in exhaled air. Ver y maintenance-friendly, only requires annual test of seal. Working time: at least 30 minutes at consumption of 30 l/min. (escape), 1 00 minutes at consumption of 10 l/min. (rest). Shelf life: ten years. Weight: 2 kg.
Fire hose. Fire action sign in self-adhesive polyester. Dimensions: 200x200mm.
Fire alarm. Fire action sign in polypropylene. Dimensions: 200x200mm.
Green, dust-free protective cabinet made of polypropylene for the diphoterine shower. Recommended for workplaces with risk of contam ination.
Spill kit in a UV resistant, sturdy package for one-time use. Ideal for small quantities of leaked liquid. Content: 15 pads (38 x 48 cm), 3 socks (7.6 x 122 cm), 1 pair of safety glasses, 1 pair of gloves and 1 disposal bag. Absorption capacity: 97 litres. Suitabl e for: general industrial use.
Anti-static absorption mat measuring 91 cm x 30,48 m. This medium-weightabsorption mat is available by the roll. The absorption mat absorbs oil, water and non-aggressive chemicals. The impermeable anti-slip bottom layer prevents the penetration of liquids, slipping, curling and buckling. Absorption capacity: 77 litres for 1 roll.
Small, multifunctional bin for quick and efficient response to leaks or maintenance projects, anywhere in the factory. The spill kit includes a handy inner panel with well organised, clearly legible leakage guidelines. Absorption capacity: 69 litres. Content: 1 ro ll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of OP quality .
Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51 cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. Absorption capacity: 18 litres.
Automatic welding helmet with side windows from the 9100 series in durable, lightweight material. Good protection of ears and side o f neck, and better coverage of the throat against heat and welding sparks. Does not include cassette or headband.
Prohibition sign - No smoking in self-adhesive polyester. Dimensions diameter: 100mm. Not PPE.
Prohibition sign - No fire, open flames or smoking in self-adhesive polyester. Dimensions: diameter: 100mm. Not PPE.
Enclosures for electrical plugs Extremely effective against unauthorised or negligent use of electrical equipment. Not PPE.
Mini-Cable Locking System in Mini Cable Locking System. Locks both hand wheel taps and interrupters. Not PPE.
Replaceable headband for 3M™ Speedglas™ Welding Helmets 100, 9000 and SL, if the original headband becomes worn or damaged during use. Assembly parts included.
Seamless knitted aramid and steel wire glove, fitted with a palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish. Sizes 7, 8, 9 and 10.
Absorption cloth with dimensions 38 cm x 48 cm. These lightweight cloths are packed in a box. Available per 100 pieces. These cloths are made from recycled materials and to absorb 50% more than polypropoyleen canvases. Ideal for absorbing all industrial fluids, including oils, water, solvents and coolants. Absorption capacity: 121 liter.
Absorption cloth with dimensions 38 cm x 48 cm. These lightweight cloths are packed in a box. Available per 100 pieces. These cloths are made from recycled materials and to absorb 50% more than polypropoyleen canvases. Ideal for absorbing all industrial fluids, including oils, water, solvents and coolants. Absorption capacity: 90 liter.
Release for mounting on gas bottle for testing or calibration of gasdetection devices. To use in combination with dockung station.
Sign according GHS normation in self adhesive polyester: health hazard. Size: 40x40mm. 20 labels per card. No PPE.
Sign according GHS normation in self adhesive polyester: oxidising. Size: 100x100mm. 4 labels per card. No PPE.
