BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Heated body warmer. Battery must be ordered separately.
Comfortable stretch softshell jacket with pliable pile fleece lining. A soft windproof and water-repellent stretch jacket with reinforcements at exposed parts and detachable hood.
Bag of 25kg biodegradable thawing beads (Ureum), do not cause corrosion and are extremely suitable for use on concrete.
Reliable and easy to use single gas detector. It works maintenance free for up to two years, just switch it on and it works continuously - no need to charge the battery or even replace the sensors. That means great reliability and no downtime.
Hydrogel plaster intended to protect and soothe minor burn injuries. Burn Cover can also be used for minor cuts and abrasions. Burn Cover is blue, so can be used when handling food. The hydrogel does not adhere to the wound.Watertight and sterile. Cool the burn for at least 20 minutes using Cederroth Burn Gel, for example, or with lukewarm water prior to applying the Burn Cover. 10 plasters/box (74 x 45 mm).
High shoe in oiled leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
Electrically insulating glove with mechanically strong resistance. Protects against risks of Arc Flash. Outside in black, inside in red, outside has a non-slip coating. Working voltage of 500 volts, test voltage of 2.500 volts. Length 360 mm, Sizes: 7-12. In accordance with EN60903 class 00 cat RC. ASTM F2675: 14 cal/cm²
Complete kit with Speedglas heavy duty welding helmet G5-03 Pro Air grinding hood under welding hood, with welding filter G5-01/03 TW, Adflo particle filter and Adflo motor unit, and carrying bag. (without safety helmet adapter)
Mildly perfumed gel based on the purest ethanol with antifungal effect. Use biocides carefully. Read the label and product information before use. Dispenser: 1060725
Hand soap for a deeper hygiene of 99.9% against the most common bacteria. Biodegradable formula with ECOLABEL. Dispenser: 1060725
Mildly perfumed gel based on the purest ethanol with antifungal effect. Use biocides carefully. Read the label and product information before use. Dispenser: 1049021
High quality wall dispenser, user-friendly and easy to fill. Can be operated with one hand. invisible lock system, without key.
Covid-19 self-test Hightop. The Hightop corona rapid test is suitable for the qualitative detection of the coronavirus in nasal swab samples. You can easily perform this test yourself using a short nasal swab. The sample is mixed with an extraction liquid and then placed on the test cassette; you will receive the test result within 15 minutes.
Extremely flexible glove in natural rubber latex. Operating voltage of 7.500 volts, test voltage of 10.000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 360 mm. IEC 61482-1-2 Box tested: APC-2
Extremely flexible glove in natural rubber latex. operating voltage of 17.000 volts, test voltage of 20.000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 360 mm. IEC 61482-1-2 Box tested: APC-2
Electrician glove in natural rubber latex. operating voltage of 36.000 volts, test voltage of 40.000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 410 mm. IEC 61482-1-2 Box tested: APC-2
Dust mask, class P2, for harmful dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. 5 years schelf life from date of manufacture.
Gas tight suit made of Tychem TK, the most resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has replaceable gloves. The suit is designed to be worn over the compressed air equipment. Delivered in a sturdy bag. Available in: yellow. Sizes: S - XXL. Weight: 6 kg.
Double Strap Wrist Support for left hand with Open Center Stay™: Supports wrist during repetitive motion discomfort by limiting wrist movements.
Very flexible lightweight glove in Dyneema. Hyflex offers excellent cutting resistance. The white outer coating in polyurethane protects the dyneema fibre (and thus the hand) during abrasive activities. This glove with great sensitivity will last and last. Recommended for manipulating materials and tools with sharp edges, e.g. in the automotive industry or in the production of durable goods. Sizes: 6-10.
Signa polo shirt Bird Eye Knit, 100% polyester, buttons, weight 175 g/m², collar in grey.
Plastic first aid kit box with wall mount, specifically stocked for use in lorries.
Welding shield for attachment to helmet. Hinged, includes clear polycarbonate lens.
Even a step beyond the Gravity Zero 9191, which feels light, is the Super G 9172: truly the lightest safety glasses: just 18 grams. The lens, moulded with increased injection pressure, is noticeably thinner yet provides the same protection as other Uvex lenses as well as identical, optimal optical properties. UV400 protection, soft temples (DCT). The clear polycarbonate lens features the Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Suspension for Peltor G2D helmet.
Face shield Centurion S760: 225 mm gold metallised, In line with EN 166 (1FT93), EN 171 (4-5).
Blue compressed air hose, 30 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Output for 2 persons / compressed air hoses to be installed on Aircare filter system.
Test liquid for performing fit test. Content: 55 ml.
Bitter test liquid for performing fit test. Content: 55 ml.
I-beam trolley for I-beams ranging from 76 to 203 mm. Maximum thickness of I-beam: 17 mm. Easily follows the movements of the anchor ed person. Can be used in combination with a safety line or fall-protection block.
Fireproof storage cabinet for storing hazardous materials. Powder-coated finish on the outside. The inside has a light-chemical-resistant plastic finish. The self-closing door has a profile cylinder lock and is self-closing and can be easily opened by means of an air spring. The cabinet contains 3 sheet steel sump trays with a load capacity of 150 kg and sump capacity of 12 litres. and 1 sheet steel bottom tray of 22 litres. There are intake and exhaust openings at the top of the cabinet (fan as option). The cabinet is 90 minutes fire resistant. Available in: yellow. Dimensions: 596x616x1968 mm. Weight 278 kg. Delivery in house is possible on request.
Ascender for left-handers for use on 8-13 mm kernmantle rope. Ideal for climbing rope in combination with a foot loop. Has two openi ngs at the bottom: one for the foot loop and one to be connected to the harness with a safety line. Can also be used to gain a bette r grip when pulling up a rope.
Ascender for right-handers on 8-13 mm kernmantle rope. Ideal for climbing rope in combination with a foot loop. Has two openings at the bottom: one for the foot loop and one to be connected to the harness with a safety line. Can also be used to gain a better grip when pulling up a rope.
Hand winch to assist with raising and lowering. Can be used in combination with Rollgliss set and Rollgliss tripod. Minimum reductio n required for use of the hand winch: 3:1 reduction. Weight: 3 kg.
Oxygen producing breathing apparatus with closed stainless steel carrying box with carrying belt. For very hazardous circumstances a nd/or places where a lack of oxygen may develop. Stored in a hermetically sealed, stainless steel carry bag with a strap for carryin g it over the shoulder. Works using an oxygen generating KO2 cell that can be replaced once it is used. KO2 cell is activated by fir st exhalation, responds to moisture and CO2 in exhaled air. Very maintenance-friendly, only requires annual test of seal. Working ti me: at least 90 minutes at consumption of 30 l/min. (escape), 300 minutes at consumption of 10 l/min. (rest). Shelf life: ten years. Weight: 4.9 kg.
Hood for chemical applications, made of PVC C2. This hood can be used in combination with a full face mask that is worn under the ho od. The cape portion of the hood has Velcro straps for securing it under the arms. Available in: green. Sizes: universal. Suitable f or: processes involving chemical risks.
Welding lens attachment for 3S full face masks. Spatter and welding lenses not included. Dimensions: 90 x 110 mm.
Y-piece for installation on compressed air hose, with one male and two female couplings. With non-return valve, makes it possible to split 1 hose into 2 hoses. Fitted with Rectus 96 couplings (NOT compatible with Rectus 96 short of lung demand valves).
1 rubber tourniquet 5 cm, 1 aromatic ammonia capsule, 1 pair Lister bandage scissors 14 cm, 2 compresses 7 x 10 cm, 1 triangular Calico bandage, 1 Cambric bandages (light) in cellophane 5 cm x 5 m, 2 Cambric bandages (light) in cellophane 7.5 cm x 5m, 2 boxes compressed absorbent wadding 20g, 1 Stella Fix skin-coloured 1.25 cm x 5 m, 1 Stella Fix skin-coloured 2.5 cm x 5 m, 1 box Stella Plast 6 cm x 1 m, 2 bottles Stellachrome B 20 ml, 10 safety pins in a bag, 1 first aid instruction sheet (official text), 1 list of contents and part numbers for the products.
1 rubber tourniquet 5 cm, 1 aromatic ammonia capsule, 1 pair Lister bandage scissors 14 cm, 6 sterile compresses 7 x 10 cm, 3 steril e triangular Calico bandages, 3 Cambric bandages (light) in cellophane 5 cm x 5 m, 6 Cambric bandages (light) in cellophane 7.5 cm x 5 m, 6 boxes compressed absorbent wadding 20g, 3 Stella Fix skin-coloured 1.25 cm x 5 m, 3 Stella Fix skin-coloured 2.5 cm x 5 m, 3 boxes Stella Plast 6 cm x 1 m, 6 bottles Stellachrome B 20 ml, 30 safety pins in a bag, 1 first aid instruction sheet (official tex t), 1 list of contents and part numbers for the products.
Emergency exit right. Rescue sign in polypropylene. Dimensions: 148x148mm.
Fire hose. Fire action sign in polypropylen. Dimensions: 200x200mm.
First aid. Rescue sign in polypropylene. Dimensions: 148x148mm.
Hazardous electrical voltage. Hazard warning sign in polypropylene. Dimensions: 100mm.
Fire alarm. Fire action sign in self-adhesive polyester. Dimensions: 200x200mm.
Hearing protection required. Mandatory sign in self-adhesive polyester. Diameter: 315mm.
Spill kit for larger calamities. The chemical and water resistant can contains the materials, which makes it ideal for outdoor stora ge. The container can be used to transport used material. Content: 100 pads (41 x 51 cm), 12 socks (7.6 x 122 cm), 8 socks (7.6 x 36 6 cm), 8 pillows (43 x 48 cm), 50 wipes, 1 pair of safety glasses, 1 pair of gloves, 10 disposal bags and 1 emergency response handb ook. Absorption capacity: 279 litres. The absorption material in the spill kit is of UN quality.
Spill kit for small- to medium-sized calamities. The chemical and water resistant can contains the materials, which makes it ideal f or outdoor storage. The container can be used to transport the used material. Content: 12 pads (41 x 51 cm), 3 socks (7.6 x 366 cm), 2 pillows (43 x 48 cm), 1 pair of safety glasses, 1 pair of gloves, 3 disposal bags and 1 emergency response handbook. Absorption c apacity: 59 litres. The absorption material in the spill kit is of OP quality.
Safety gloves required. Mandatory sign in polypropylene. Diameter: 100mm.
Eye protection required. Mandatory sign in polypropylene. Diameter: 200mm.
Flexible, chemically resistant PVC sealing mat. Tightly seals off drain grates and prevents spilled liquids from draining away. As long as it is cleaned with a non-aggressive detergent, this mat is reusable. Dimensions:120X120CM
Absorption spill kit with an absorption capacity of 152 litres. Intended for medium-sized spills. Content: 50 pads (41 x 51 cm), 4 s ocks (7.6 x 366 cm), 8 pillows (43 x 48 cm), 1 pair of safety glasses, nitrile rubber gloves, 5 disposal bags and 1 emergency respon se handbook. The absorption material is of MRO quality. Packaged in a 200-litre chemical and water resistant drum.
Spill kit in a UV resistant, sturdy package for one-time use. Ideal for small quantities of leaked liquid. Content: 15 pads (41 x 51 cm), 3socks (7.6 x 100 cm), 1 pair of safety glasses, 1 pair of gloves and 1 disposal bag. Absorption capacity: 104 litres.
Protective lens for the inside of Speedglas welding cassette 9100V. Not separately approved as PPE.
Automatic welding cassette with three automatically darkening welding filters. Width of welding filter: 45x93mm. Battery life: 2800 hours.
Attachment set for headband suitable for Speedglas 9100 welding helmet. Not separately approved as PPE.
Prohibition sign - Not drinking water in self-adhesive polyester. Dimensions diameter: 100mm. Not PPE.
Mandatory sign - Respiratory protection mandatory in self-adhesive polyester. Dimensions diameter: 100mm. Not PPE.
Warning sign - Dangerous electrical voltage in self-adhesive polyester. Side Dimensions: width 50mm, height 43mm.
Rescue sign - Assembly point during emergencies in self-adhesive polyester. Dimensions: 200X200mm. Not PPE.
Fire fighting sign - Extinguisher hose in self-adhesive polyester. Dimensions: 148X148mm. Not PPE.
Prohibition sign - No smoking in self-adhesive polyester. Dimensions diameter: 050mm. Not PPE.
Prohibition sign - No transport vehicles in self-adhesive polyester. Dimensions diameter: 200mm. Not PPE.
Rescue sign - Assembly point during emergencies in polypropylene. Dimensions: 250X250mm. Not PPE.
Absorbent pads on a roll measuring 96 cm x 44 m. These heavyweight perforated pads on a roll are packaged in a bag. Available per roll. The wipes are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 274 litres.
Absorption mat, 147 cm x 24 m. Heavy weight absorption mat. Absorbs oil and petroleum-based products. Consists of a reinforced upper layer and a non-slip underlay that keep the mat in place and prevents seepage. The UV resistant upper layer allows outdoor use. This absorbent mat can be combined with strips that hold the mat in place. Absorption capacity: 207 litres for 1 roll.
Prohibition sign - Not drinking water in self-adhesive polyester. Dimensions diameter: 200mm. Not PPE.
Red Box for key access. Dimensions: 15x12.5x2cm. Reeds to be ordered separately with the article number 1056943
Handy gas tester for gas test tubes. The diaphragm relaxes to suck air in through the tube. This robust manual design is always ready for use and can be operated with one hand. Ideal for environments such as the inland waterways.
