BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
High shoe in smooth leather, with a steel antiperforation sole and synthetic 200J toecap. Fitted with a SympaTex membrane. Sole in P U/Nitrile, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Service pants in full stretch that provides maximum freedom of movement and comfort. Modern fit. Leg pockets on both sides with zip closure, phone pockets on both sides with Velcro closure. Folding rule pocket on the right side. Internal back pockets. Pre-bent knees. Internal pockets for knee protectors, adjustable in two height levels. Wider belt loop at the back to prevent pressure from belt. D-ring in front. Hidden attachment for holster pockets (ref. article 9042). Hidden button at front. Material:1: 65% polyester, 32% cotton, 3% EOL - 220 g/m2 Material 2: 91 ,5% nylon, 8,5% spandex Weight:250 g/m² Color comment:navy-58, grey-98, black-99 Gender:Men
Centurion adapter S565 for 30mm slots.
Dust mask, class P2, for irritating dust. Mask without nose bridge vut whit seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 10.
High shoe in waterresistant full grain leather with synthetic 200J toecap and synthetic antiperforation sole. Foreseen of a soft inlay sole with membrane in GoreTex. Sole in PU/Nitril. Sizes: 39-48.
Lanyard, 1.5 metre length, consisting of webbing strap with integrated shock absorber. Fitted with two standard carabiners. Serves a s connection between anchor point and harness.
6-points terylene suspension for 1125 helmet with slip adjustment.
Face shield in clear polycarbonate for use with face shield holder S89SR or helmet face shield holder S54 CE.
Green compressed air hose, 10 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Compresses for very rapid first aid for burns in the acute burning phase. 20 x 20 cm. Three year shelf life.
Automatic welding helmet from the 9100 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. With three automatically darkening welding filters and replaceable side win dows. Width of welding filter: 73x107mm. Battery life: 2000 hours.
Helmet clips for attachment of Petzl headlamps to safety helmet. Can be attached to rain gutter of the safety helmet to hold the hea dlamp’s elastic strap in place.
Helmet clips for attachment of Petzl headlamps to safety helmet. Keeps the headlamp’s elastic strap in place.
Mask made of skin-friendly silicone rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speech is con veyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, includes a carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupli ng.
Gaiters, aluminized para-amide, 500gr./m², Velcro closure, no lining,strap under sole, long-term use. Dimensions: length 36cm.
Standard casing for hand wheel valves. Not PPE.
SP-225 opening valve (with sign).
Earplug in TPE with soft strips for an easy fit in the ear canal. Equipped with a cord and handles to easily remove earplugs.
Terylene suspension with wheel system, resistant to high temperatures,fitted with XL VABON sweatband, suitable for Centurion Vulcan S22.
Model mounted eye and face wash features the medically acclaimed AXION MSR eyewash and eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
Multicharger for 4 batteries, high capacity, as accessory for motor unit Versaflo. No PPE.
Drench shower for horizontal installation shall include a green ABS plastic Ø 270 mm showerhead with integral self-regulating 76l/min flow control, chrome-plated brass stay-open ball valve equipped with a stainless steel ball and stem. Stainless steel pull rod with triangular handle. Pictogram SP177 included.
GH4 chinstrap for the G3000 safety helmet.
Bodywarmer, Guardian H²O, flame retardant, anti-static, zipper under flap, porto phone pocket, 2 lower pockets with velcro closure.
Overboot against electricity. Sole is produced with a vulcanised rubber and tested against 35000V. Each boot is tested separately against 25000V before getting sold. 100% waterproof and adjustable in height. Easy to pull out, because of V-shackle. In accordance with: EN50321 / EN ISO 20347 OB HRO SRA.
Lined winter glove in goat leather. Open cuff. Thin. Fully lined. Sizes 7-11.
Replacement knife for scrapers Argentax and Cleany. Packed per 10 pc. Length: 39mm.
Every day in many industries, people are sustaining hand and finger injuries that are preventable. Using the correct safety devise should be an essential part of everyday life. If you are working in areas where objects could hit you on the head, you would wear a hard hat. If your eyes are at risk from foreign objects or wind blown particles, you would wear safety glasses. Think about your hands in the same way! Be sure to keep them safe and out of harms way, be sure to use the Fingersaver, don’t take risks with you hands.
Low shoe Helium in water repellent ECOLORICA with non-metallic toecap and anti-perforation sole. Inner lining in textile, anatomically shaped foot-bed. Outsole: PU/TPU. Sizes: 36-47.
Low shoe S2 from water resistant full grain leather and steel 200J toecap. Lining in synthetic material. Strong anti-slip Nitrile sole. Additional soft insole with steel leg for even better comfort. Sizes: 38 - 48.
Low shoe S2 in strong waterproof leather. Lining in merry mesh and a small layer of PU foam. With 200J steel toecap. Sole in nitrile with strong anti-slip resistance and good shock absorption. Removable insole with high comfort. Steel leg with added support. Sizes: 38 - 47.
Raincoat, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zip under storm flap with press stud fastening, sleeves with press stud fastening, 2 straight pockets. Complies with: EN 343.
Low shoe in waterresistant black full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a liner in leather. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 37-47.
Antistatic clog autoclave Studium, very suitable for surgery and aseptic places. With antislip SRC, antistatic ESD and shock absorption in the heel. Adjustable heel strap. Autoclavable up to 134°C. Available in different colours and double sizes. Sizes: 35/36 - 45/46.
Jaune, comfortable gas goggles with large field of vision and frame in PVC. Fits perfectly over prescription glasses, gas-tight. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Low shoe, extremely lightweight in velours S1, with ventilation openings. With a plastic 200J toecap. Lining in breathable textile and insole that is removable and moisture/shock absorbing. Sole in PU / PU. Available in 2 widths. Sizes: 35-43. Width measurements: 10, 11.
Bumpcap in nylon or hi-vis polyester with reflective accents, with LED lighting technology under the short peak: Protection against cranial bumps and bruises from a state-of-the-art shell; comfort and style from a very cool lid. Built-in LEDs illuminate projects without a flashlight or bulky headlamp (48 lumens). Battery life of approximately 30 continuous hours. Removable impact-resistant shell with foam lining. Sizes: 56-64cm.
Inexpensive full body harness with 2 D-ring and pas through buckles. Only shoulder and chest straps are adjustable. Test Weight: 140kg. Universal size.
Flame retardant and antistatic fleece in 50% Protex/32% cotton/16% polyester/2% negastat (AST) (350g/m²). Full zip closure, straight collar, 2 front pockets with zipper, elongated back. Available sizes: S- 3XL. Available colours: navy.
Small and compact safety knife for opening boxes, for example. Replacement blades 45.60: 1015780
Duolens glasses with modern fashion-look and extra eyebrow protection. Size is between the Pheos and the Pheos S. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with temple ends with non-slip components. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog- free on the inside and easy to clean. Frame: white/black.
Semi-orthopedic inlay sole for women. Excellent schock absorption. Suitable for products of the NOVA productgroup. Sizes: 35-42.
High ranger shoe in waterproof leather with metal toecap and metal anti-perforation sole. PU / PU sole, with added PU raised toecap. Fully padded water-tongue. Contains a Gore-Tex membrane. With chainsaw protection class 2. Sizes: 38-48.
High shoe in waterresistant oiled leather, with a non metallic antiperforation sole and 200J toecap. Fitted with a breathable, abrasion resistant liner in Coolmax. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, ergonomic insole. Sizes: 35-49.
High shoe in waterrepellant leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in mesh. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Waterproof goggles with PC lenses. Contains an isoprene strap and TPR comfort seal. Equipped with a Platinum coating.
Polo piqué with stretch. The men's model has a three-button closure and the ladies model has 4 buttons. Neck tape, side vents and ribbed cuffs. Quality: 95% cotton, 5% elastane, 200 g / m². Available sizes: S-5XL. Available colors: White, gray melange, red, navy, blue, green, black and dark gray.
Overall Industry flame-retardant treated cotton: - Concealed button closure at centre front - Single layer chest pockets with safety fl ap and button closure - Slanted side pockets - Side vents with safety fl ap and button closure, behind side pockets - Kneepad pockets - Adjustable waistband for improved ergonomics and ultimate comfort - Single layer back pocket with safety fl ap and button closure on RHS - Single layer tool pocket on RHS leg Quality: 60% cotton / 39% polyester / 1% AST, 360 g / m². Available sizes: 48-66. Available colors: Navy. Complies with: EN 1149-5, EN ISO 14116, EN ISO 11611 class 1, and ISO 11612 A1B1C1E1F1.
This cooling cap keeps your head cool in warm conditions. Fill the cap with a little water, spread the water over the cap, let the excess water run out and ready. The hat cools your head for up to 3 days! Quality: Inuteq Dry Nylon Available sizes: Universal Available colors: Grey
Seamless glove with impermeable full nitrile coating all over the hand with extra nitrile foam coating finish on the palm for good grip on wet or oiled components. High-abrasion resistance and anti-impact protection on the back of the hand. Unique Showa ergonomic shape that replicates the natural curve of the human hand. High-visibilty green colour for visible hand signaling. Seamless knitt designed to prevent irritation.No Latex. Sizes: 7(M)-10(XXL)
Ladies' blouse with short sleeves in polyester / cotton (195g / m²). Press stud fastening at the front, 2 side pockets, 1 left breast pocket. Length: 75cm. Available sizes: 0-6. Available colors: Blue, navy, white and black.
Black fitover safety glasses with pressure-free fit and hinge (foldable). Very light, fits over most prescription glasses. Frame in synthetic material and CBR65 polycarbonate lenses with integrated side shields. The innovativetemple concept makes use of Uvex X-stream technology for an excellent, non-slip fit and a wide range of applications. Protects against dust and chemical spatters. With Supravision Excellence coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
2-point textile chinstrap, compatible with V-Gard helmets.
The 3M ™ PELTOR ™ WS ™ ProTac XPI Bluetooth® headset features level-dependent microphones, which ensure that ambient sounds are audi ble and communication is possible in noisy environments. Still protected against constant noise or spikes of noise. If the environment awareness function is low or even disabled, you can use the push-to-listen (PTL) if you suddenly find yourself in a situation where you need to be aware of your environment. A simple push of a button resets the level of ambient noise to your preferred setting. Bluetooth multipoint connectivity for simultaneous seamless connection with two external Bluetooth devices. Yellow (high-viz) color that provides extra visibility in harsh conditions. IP68-classified microphone with ambient noise suppression, optimized for environments with harmful noise levels. Use the FLX2 accessory system for an additional, simple and reliable cable connection for the most common 2-way radios. A robust PTT on the headset, for radio communication.
Raincoat suitable for food industry: • Oil and cold resistant. • Wind and waterproof. • Fixed hood with drawstring • Neck with press stud fastening • Elastic in the sleeves • Washable at 95 degrees Quality: 50% polyester, 50% polyurethane, 240 g / m². Available sizes: XS-4XL. Available colors: blue and white. In accordance with: EN 343 3.1, EN 13034 and EN 1186.
Antistatic insole. Very good moisture absorption and release properties, shock-absorbing and comfortable, breathable, durable. The insole allows users to create more space in the shoe with wider feet. Sizes: 35-49. No PPE.
The Vaski is a hi-vis ladies rain jacket which also offers a high degree of protection to the wearer. The jacket is made out of a light, but high quality fabric and complies to many international standards such as IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5 and EN 13034. This premium jacket is equipped with a YKK zipper with handy grip for easy opening and closing. The sleeve ends are preshaped and the back is extended for your comfort. Available sizes: XS-2XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
100% polyester (420D) with waterproof PVC lining large main compartment Two pockets at the ends Large front pocket Reflective stripes on three sides Reinforced handles with Velcro Adjustable shoulder strap Content: 75 liters Dimensions: 68 x 35 x 32 cm Maximum embroidery: 14, 15, 20 round hoop Pressure surface: 35 x 20 cm, 28 x 22 cm, 38 x 32 cm Available sizes: Universal. Available colors: Navy and black.
Low-cut, light, metal-free, perforated safety shoe in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/TPU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Made from durable polyethylene. Certified according to the latest IMO and SOLAS standards. Diameter 75 cm, Weight 4.5 kg. Cord 30m available (art. 1032349).
Prioritize comfort and wearer safety with the CS710 chemical resistant gloves. A double-dipped nitrile coating offers robust durability, whilst the seamless liner and natural latex-free composition ensure comfort during long periods of wear. Enhanced grip from the foamed nitrile palm coating provides extra grip, even in oily or slippery environments. Sizes: 7(S) - 11(XL).
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Head protection, large, for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01
Automatic welding helmet from the G5-01 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. Adjustable airflow distribution with three automatically darkening welding filters. Width of welding filter: 73x109mm. Battery life: 1500 hours.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Women's Casma trousers with ARC protection: Closure with 1 hidden button / Front fly with zipper 2 inset pockets with flap and press stud fastening 1 ruler pocket with flap closed by hidden press studs elastic waist knee pockets Waistband with belt loops Double stitched (2x2) flame retardant reflective striping (50mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56. Available colors: Navy. In accordance with: IEC 61482-2: 2009 Class 1- ATPV 15.2 cal/cm², EN ISO 11612: 2015 / A1A2B1C1E3F1, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: 2005 + A1 : 2009 Type PB [6].
High safety shoe in waterrepellant Cordura with synthetic antiperforation sole and a synthetic toe cap. Outsole in PU/PU, including ESD. Has a removable inner schoe. Antislip SRC and choc resistant.
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. Available sizes: 44-64, 84-120, 146-156 SCA. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
The Nibas is our cold storage bomber jacket with quilted lining that protects you to temperatures of -40 °C. The inner collar is finished in fleece. The sleeves are handy with knitted cuffs, a practical thumb hole and touch and close sleeve narrowing. For your comfort, the elastic waist can be narrowed using press studs on the sides. The shoulders are reinforced so that this bomber jacket is a durable and practical protective garment. Inside: Fleece inside collar, Provided for hood (hood available separately), Front zip closure under flap, 1 patched chest pocket with flap, 2 inset pockets with flap, 1 sleeve pocket + pen pocket, Round sleeves, Sleeve narrowing by touch and close fastening, Shoulder reinforcement, Elasticated waist and narrowing by press studs at the sides of the waist, Elongated back tail, Back length 80 cm (L) Fabric: 100% polyamide; ± 185 g/m² + hi-vis - 100 % PES ± 220 g/m² - Hi-vis Cordura: 100% polyester ± 210 g/m² Color: fluo yellow / navy. Compliant with: EN 342 + EN ISO 13688 : 2013
Dark grey hearing protector with HiViz orange element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
