BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Brady safety label - Danger. Brady safety labels can be attached quickly and without additional tools. Due to the flexibility of the material, the label can be used at any location. The self-closing unit lets you attach any part of the device or machine. The perforations and notches in the tail of the label make it very easy to install (max. Ø 36 mm). Not PPE.
Low shoe Traxx 203 S3 in black nubuck leather with TPU scuff cap. Fitted with a 200J steel toecap and antiperforation sole. Liner in splitleather Cool Comfort, with PU/TPU outsole. Inlay in PU with textile layer.
Roll of white paper for paper roller on examination table (Art: 1006179). Dimensions: 50cm x 50m.
Disposable safety cutter for left- and righthanded. For opening different packages. The blade is not replaceable. In this way, the knife can not get lost. Especially important in the food industry. Again, the safety technique of recoil knife is applied. The knife fits in any pocket. No PPE.
Multicharger for 4 batteries, high capacity, as accessory for motor unit Versaflo. No PPE.
Braces as spare spart for motor unit Versaflo. No PPE.
Plastic spill tray without grid. Capacity: 63 litres. Weight: 5.5kg. Dimensions: 1000X605X200MM.
Anti-static absorbent wipes on 38 cm x 46 m sized roll, sheets perforated lengthwise every 23 cm. These medium-weight double-perforated pads on a roll are packaged in a box. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these wipes as chemical waste. Absorption capacity: 73 litres.
Lined winter glove in goat leather. Open cuff. Thin. Fully lined. Sizes 7-11.
Replacement knife for scrapers Argentax and Cleany. Packed per 10 pc. Length: 39mm.
Automatic retractable cutter in the form of a pen with replaceable ceramic blades. Rubber holder Double sided ceramic knife is specially designed to stay sharper and cause fewer accidents. Remains up to 10x sharper than regular replacement blades. Replacement blades: 1025874
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 0.8m. Anchor point for protection of one person.
Low shoe S2 in strong waterproof leather. Lining in merry mesh and a small layer of PU foam. With 200J steel toecap. Sole in nitrile with strong anti-slip resistance and good shock absorption. Removable insole with high comfort. Steel leg with added support. Sizes: 38 - 47.
White lightweight, all-round clog in moulded, antibacterial EVA. Side ventilation holes for better breathability. Anti-slip Nitrile sole. With adjustable strap for heel support. Sizes: 37-46. Not PPE.
Rebel fall-prevention device with 15 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from the fall-protection mode to the rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the AM100 tripod via adapter.
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Foreseen with a mirror polycarbonate lens with a antivapor and anti scratch coating.
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: ▪ High in 1 piece upright closing collar with wide closure. ▪ Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. ▪ YKK anti-panic crystal closure with a waterproof flap and velcro closure. ▪ Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. ▪ Pre-formed 3D sleeves with insert. ▪ Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! ▪ Equipped with external elbow protection and reinforced sleeve ends. ▪ The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. ▪ Extended back for better protection.
Manually retractable cutter in the form of a pen with replaceable ceramic blades. Rubber holder Double sided ceramic knife is specially designed to stay sharper and cause fewer accidents. Stays sharp for up to 10x longer than normal replacement blades. Orange version. Knife can be blocked. No PPE.
Cover for TR-600 can be combined with filter TR-6310E.
Content for first aid kit Orange Cross (Art: 1031051). Contents for Oranje Kruiskoffer Q50NL: Quick Safe kiss breathing tissue 1 piece Quick disinfectant 30 ml 1 piece Quick triangular cloth cotton 2 pieces, Quick vinyl gloves per pair packed 2 pieces Quick adhesive plaster 2.50 cm x 5 m First aid 1 roll Quick gaze 10 x 10 cm each 4 pieces Quick gauzes 1/16 per piece 4 pieces Quick splinter tweezers Stainless steel drum 8 cm 1 piece Quick rescue blanket gold / silver 1 piece Quick wound bandage EU 10 x 12 cm 4 pieces Quick drawing tweezers plastic 1 piece Quick bandage self-adhesive 8 cm x 4 m 2 pieces Quick adhesive strips 3 mm x 75 mm a 5 pieces 2 pieces Quick lister belt scissors 14 cm stainless steel drum 1 piece Quick synthetic cotton wool 3 m x 10 cm 3 roll Quick elastic hydrophilic 6 cm x 4 m 2 pieces Sanap wound plaster 100 x 6 cm 1 bag Quick assortment wound plaster Quick a 30 pieces 1 bag Quick wound fastener 6 x 8 cm flat model 3 pieces Quick metaline compress 10 x 12 cm 5 pieces Quick ideal 8 cm x 5 m 3 pieces
Safety line, 1.5 metre length, consisting of kernmantle rope with integrated shock absorber. Fitted with standard carabiner and 1 ca rabiner hook with a 65 mm gate opening. Serves as connection between anchor point and harness.
Modern glasses, smaller then the standard Pheos range. Fitted with temple ends with non-slip components, headband and an extra comfortable frame which creates a close seal to protect from particle ingress and splashes. Top choice for working environments with dust exposure. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision Extreme coating. Frame: black/grey.
Super lightweight sportive spectacles (37g) in clear polycarbonate. Protective covering thanks to flat base curve. Lens inclination of 11° ensures good view downwards and provides the wearer safeness from stumble-accidents. Flexible frame with soft temples(XCT). With Supravision Clean coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Bumpcap in nylon or hi-vis polyester with reflective accents, with LED lighting technology under the short peak: Protection against cranial bumps and bruises from a state-of-the-art shell; comfort and style from a very cool lid. Built-in LEDs illuminate projects without a flashlight or bulky headlamp (48 lumens). Battery life of approximately 30 continuous hours. Removable impact-resistant shell with foam lining. Sizes: 56-64cm.
Cooling vest based on PCM technology to prevent heat stress and fatigue in very hot environments. Provides constant cooling choosing from 3 different temperatures. Outside material: robust canvas with inner polyester mesh lining. 4 pockets for coolpacks, adjustable waist and front zip closure. 15°C cool pack included. Available sizes: S-3XL. Available colour: black.
Inexpensive full body harness with 2 D-ring and pas through buckles. Only shoulder and chest straps are adjustable. Test Weight: 140kg. Universal size.
Fall-stop device with 3.4 metre strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Set of 3 replacement filters for Aircare filter unit.
Cut and heat resistant arm protector 35 cm. Conform: EN388:2016 2.X.4.X.E
Coverall, 50% polyamide, 50% polyurethane, 170 gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zipper under double storm flap with press stud fastening, elastic in the waist, windstopper in the sleeves, adjustable press stud fastening at the bottom of the leg. Complies with: EN 343.
This windproof rain parka features a standing collar, an elastic wristband with narrowing and a cord in the waist and hem to break the wind. The detachable hood has a chin guard and a flap and can be stored in a special inside pocket. For your convenience, the sleeves are preformed and the zippers have long zipper pullers. Equipped with seven pockets (including one inside pocket), this is a very practical rain parka. Quality: Siopor® Extra: 100% polyester fabric (cotton touch) with 100% PU laminate; ± 205 g/m². Available sizes: S-3XL. Available colors: Fluo yellow/navy and fluo orange/navy.
High visibility gilet in 100% polyester (125g/m²). Horizontal and vertical reflective striping, velcro closure. Available sizes: S-4XL. Available colours: hi-vis yellow, royal blue, red, paramedic green, lime.
High ranger shoe in waterproof leather with metal toecap and metal anti-perforation sole. PU / PU sole, with added PU raised toecap. Fully padded water-tongue. Contains a Gore-Tex membrane. With chainsaw protection class 2. Sizes: 38-48.
Waterproof goggles with PC lenses. Contains an isoprene strap and TPR comfort seal. Equipped with a Platinum coating.
Low shoe in white synthetic material, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
High shoe in waterresistant black full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Sympatex liner. Outsole in PU/Vibram, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
This cooling cap keeps your head cool in warm conditions. Fill the cap with a little water, spread the water over the cap, let the excess water run out and ready. The hat cools your head for up to 3 days! Quality: Inuteq Dry Nylon Available sizes: Universal Available colors: Grey
Warm, insulating gloves with acrylic/nylon liner with PVC coating. PVC-foam coating stays flexible in cold temperatures, food approved. Industy leading combination of comfort, warmth and dexterity.
Cut and heat resistant arm protector 45 cm., with thumb opening and velcro.Ergonomic design. Protects during 21 seconds against 100°C contact heat (test report).
Plastic box for moldex full face mask. Dimensions: 29x19x27,5cm
Lightweight and flexible chemical suit designed specifically for protection against Ebola and other viruses. Combines Type 3 <(>&<)> 4 design with the infectious agent protection of a barrier film and stitched and taped, fully sealed seams.
Flame retardant and antistatic signaling polo, feels very soft, comfortable, good moisture-regulating properties, anti-bacterial, light, inherently flame retardant <(>&<)> antistatic, perforated reflective bands for increased wearing comfort, press-stud fastening, Long Sleeves. Quality: 60% Protex + 39% Viloft + 1% AST; ± 180 g / m². Available sizes: S-3XL. Available colors: fluo yellow / navy. Complies with: EN ISO 11612 A.B1.C1.F1, EN ISO 14116 index 3, EN 1149-5, EN ISO 20471 class 2 and EN 13758-2.
Hi-Vis T-Shirt with long sleeves and Cooldry yarns. This offers protection from the sun by a UPF50 +. Quality: 50% Polyester / 50% Polyester, Cooldry, 180 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS-7XL. Complies with: EN 20-471 class 3.
Protective cold storage jacket up to -40 ° C! The inner collar was finished in fleece and the extended back, the narrowed sleeves and the knitted cuffs in the sleeves, which also have a practical thumb hole, help to limit the heat loss. The shoulders are provided with reinforcement to prevent wear and also the elastic narrowing in the back is a comfortable plus of this jacket. Inside: Fixed quilted lining, Knitted cuffs in the sleeves with thumb hole, 1 inner pocket. Exterior: Inner collar in fleece, Fitted with hood (hood available separately), Zipper with flap, 1 patched chest pocket with flap 2 inset pockets with flap, 1 sleeve pocket + pen pocket Rounded-in sleeves, narrowed sleeves by means of Velcro closure Shoulder reinforcement, Elastic narrowing in the back, Extended back and Back length 83 cm (L). Fabric: 100% polyamide; ± 185 g / m² + HV - 100% PES ± 220 g / m² - Hi-vis Cordura: 100% polyester ± 210 g / m². Color: fluo yellow / navy. Compliant with: EN 342.
Low shoe glove in water repellent black Matryx multi-fibre. With an aluminium 200J toecap and a synthetic anti-perforation sole. Equipped with TPU heel reinforcement. Inner lining in breathable textile and insole in polyurethane foam. Sole in PU/Nitrile, resistant to 300°C. Sizes: 35-48.
The 3M ™ PELTOR ™ WS ™ ProTac XPI Bluetooth® headset features level-dependent microphones, which ensure that ambient sounds are audi ble and communication is possible in noisy environments. Still protected against constant noise or spikes of noise. If the environment awareness function is low or even disabled, you can use the push-to-listen (PTL) if you suddenly find yourself in a situation where you need to be aware of your environment. A simple push of a button resets the level of ambient noise to your preferred setting. Bluetooth multipoint connectivity for simultaneous seamless connection with two external Bluetooth devices. Yellow (high-viz) color that provides extra visibility in harsh conditions. IP68-classified microphone with ambient noise suppression, optimized for environments with harmful noise levels. Use the FLX2 accessory system for an additional, simple and reliable cable connection for the most common 2-way radios. A robust PTT on the headset, for radio communication.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. Fitted with adjustable, elastic headbands. Without an adjustable nosepiece (metal-free) and extra wide headbanf for more comfort and a secure fit.NPF: 50.
Antistatic insole. Very good moisture absorption and release properties, shock-absorbing and comfortable, breathable, durable. The insole allows users to create more space in the shoe with wider feet. Sizes: 35-49. No PPE.
3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with a Scotchguard coating. Marking: 2C-1.2 1 FT KN.
The light and elastic Herford coverall has a fixed hood, a zipper concealed under a double flap with press studs and sleeve and ankle narrowing by means of press studs. The durable Flexothane® fabric protects you against rain and wind. Moreover, this smooth coverall is machine washable. Available sizes: S-3XL. Available colours: Green and navy.
Round neck sweatshirt, double fabric, ribbed cuffs and hem at the bottom. Quality: 60% cotton, 40% polyester, 260 g / m2. Available sizes: XS-4XL. Available colors: Navy, sky blue, red, black, forest green and gray.
Flame retardant softshell Umia with arc protection: Straight collar; Zip closure under flap; 1 patched chest pocket with flap; 2 inset pockets; 1 loop for gas detector; 1 loop for badge; 1 Napoleon pocket; Round sleeves; Sleeve narrowing by touch and close fastening. Quality: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-3XL. Available colors: Navy/fluo yellow.
Hi-vis trousers Belenos 12433 with: 2 front pockets; 2 back pockets with flaps; 1 thigh pocket; 1 ruler pocket; Knee pad pockets Cordura. Stretch elements M-move Industrial laundry Quality: Recycled polyester / LYOCELL 65% 35%. Available sizes: 42-66 BE. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 class 1.
Low-cut, light, metal-free, perforated safety shoe in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/TPU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Gray flame-retardant PU coating on 1 side, for strength and slip resistance. For light welding and grinding work. Vertical use. Free of asbestos. Short-term temperature resistance up to 600°C. Approved according to EN13501-1.
Welding vest FR08: Protects against radiant, convection and contact heat; 100% Metal Free; Industrial wash at 75°C and machine dry 155°C; Flame Retardant Industrial Washable Striping; antistatic; Extended back for more protection; Radio loops for easy attachment of a radio; Velcro adjustable cuffs for a snug fit. Quality: Bizflame Ultra: 80% Cotton, 19% Polyester, 1% Carbon Fiber 340g. Available colours: Gray and Royal Blue. Available sizes: S-3XL. In accordance with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 Class 1, EN 13034 Type PB [6] and ASTM F1959/F1959M-12 ATPV 16 CAL/CM2 (HAF 83.7%).
Flame retardant coverall in Cantex Weld on the front and sleeves, and in Cantex Stretch on the back. Cantex Stretch gives the overall flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The coverall has increased visibility. Concealed front zip. Two walkie-talkie loops. Chest pockets with flap, right pocket with tool loops and concealed key ring for ID card holder. Side pockets with flap. Height-adjustable knee pockets. Back pockets with flap. Ruler pocket with flap. Adjustable cuffs with press studs. Elastic at the waist. Contrast stitching. Quality: Cantex Stretch, 365 g/m² + Cantex Weld, 365 g/m². Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1B1C1E3F1, EN ISO 11611 A1 Class 2, EN 1149-5, IEC 61482-2 Class 1 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 13034 type PB [6 ].
Made from durable polyethylene. Certified according to the latest IMO and SOLAS standards. Diameter 75 cm, Weight 4.5 kg. Cord 30m available (art. 1032349).
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The nitrile coating in the palm provides excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 5-11. Complies with: EN388:2016 4.X.4.3.C, EN407: X.1.X.X.X.X
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
Plastic dispenser for attachment to wall, consisting of a plastic pump (Art: 1053793), 0.5 litres of cleaning fluid (Art: 1053666) and cleaning wipes (Art: 1021979).
Head protection, large, for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01
Automatic welding helmet from the G5-01 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. Adjustable airflow distribution with three automatically darkening welding filters. Width of welding filter: 73x109mm. Battery life: 1500 hours.
Full zip hoodie: • sweater and jacket at the same time • fur on the inside for extra warmth • hood with drawstring • large front pockets • knitted, elastic waistband at the bottom hem • reflective piping on the front and back Quality: 65% cotton, 35% polyester | inner side: 100% polyester, 430 g/m². Available sizes: XS-4XL. Available colors: Black, red, gray and navy.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating provides a good grip. 15 gg liner and extra reinforcement along the thumb and index finger. Cut protection level D, approved for contact heat up to 100°C for max.15 sec. Approved for ESD and food safe. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.D, EN407: X.1.X.X.X.X
High safety shoe in full grain leather with synthetic antiperforation sole and a steel toe cap. BOA-closing system. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in Gore-Tex. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.