BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
A2 filter protects against organic gases and vapours. Can be used in combination with the Adflo motor unit. If A2 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation on a single battery is desired. Class 2 gas filter: for max. concentration of 0.5%.
The Peltor Clean HY100A is a hygienic solution... A replaceable, self-adhesive, absorbent paper coating that is applied to the sealing rings. For use in hot or dirty environments, or when the ear defenders are being used by different people. Pack of 100 sets. No PPE, only to be used in combination with Peltor earphones.
Dust mask, class P2, for irritating dust. Mask without nose bridge vut whit seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 10.
Replacement visor (anti-fog and hard coating) for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. 5-piece packaging. No PPE.
Top layer: towelling made of 85% viscose of bamboo and 15% of polyester, weight 230 gr/m². Bottom layer: 50% elastomer-latex and 50% cocos fibre, with a weight of 550 gr/m². The top and bottom layers are connected with a polyurethane foam density 25 kg/m³ Fresh, soft and absorbs perspiration. Sizes: 36-49.
Heat resistant Kermel mitt with double lined cotton fabric. Kevlar® reinforced at the thumb. Split leather 13 cm cuff made with Kevlar® fibres. Contact heat to max. 500 °C.
Traffic cone made of polyvinyl chloride, fluorescent orange and reflective white. Height 30 cm, reflective white band around circumf erence, black non-slip base, highly visible during the day due to fluorescent orange colour and at night due to reflective propertie s.
Short winter cap in 2 layers of cotton to be worn under safety helmet in extremely cold conditions. Features reflective strips, with space for a cap warmer on both sides.
Fluid-tight glove in jersey with neoprene coating, 30.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. The extra insulation layer makes the glove ideal for working for short periods with hot liquids at up to 180°C or in a cold environment up to -25°C. A popular model for the petroleum industry, for waste treatment and for the transportation and treatment of hazardous substances! Siliocne free.
Basic glasses having temples with limited adjustability. Fitted with clear polycarbonate lens that provides 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
These reusable & detectable earplugs are an ideal alternative to otoplastics for personnel who are only temporarily exposed to noise or for temporary personnel who work under noisy conditions. The Comfoor Parttime includes a unique filter that filters out all the harmful noises, without completely blocking the ear. As a result, conversations and sounds from the surroundings remain audible and there is no sense of vertigo. It is made of skin-friendly, durable silicone material that easily conforms to the ear. The result is a good seal and superb wearing comfort. Thanks to the unique design and special grip, the Comfoor Parttime is easy to place in the ear and to remove. Can be optionally fitted with a cord with clothing clip. Available in: blue. (SNR 24 dB).
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
PPE with CE - mark of class 3.
Universal roll suitable for maintenance work in an industrial environment. Heavy weight, perforated and bonded. Dimensions: 38cm x46m. Packaging: 1 roll per cardboard dispenser. Absorption capacity: 94L.
Access ramp for sump pallets. Dimensions: 650x800x160mm. Weight: 8kg.
Cooling Towel: Dampen this synthetic chamois to create a cooling aid significantly colder than ambient air. Advanced PVA material holds water without feeling heavy. Super-evaporative, feels significantly cooler than ambient air.
Jacket / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / Washable at 95°C / High frequency welded seams / Outside: Fixed hood / Zip closure under flap with press studs / Raglan sleeves / Elasticated wristband / Underarm ventilation / Back length 85 cm (L) / Fabric: FLEXOTHANE® Kleen: / 100% polyamide knitting 6.6with PU coating; ± 170 g / m² Colour: W02 white
Bomber, 100% polyester, PU coated, 190g./m². Fleece in collar, ID pocket, hood in collar, reflective bands.
Air hood with PC/polyester safety helmet with hinged visor and Cordura full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 500 with Versaflo or Jupiter, 200 with compressed air.
Grey, metallic safety glasses with polycarbonate lenses which protect against dust and impact. Preformed temples for a better adaptation to the face. Adaptable nose support in silicone with antislip properties benefit wearing comfort. Lateral protection in clear polycarbonate and riveted. Matching case also available. Suitable for light or medium mechanical work and laboratory applications.
Welding goggles with white lens and Supravision HC-AF coating (extremely scratch resistant on the outside and prevents condensation on the inside. 100% UV-resistant). Flip up lens in grey polycarbonate with Infradur AF coating (offers protection against harmful UV and IR radiation when welding without altering colours, thanks to the grey lens (EN172). With anti-vapour coating on the inside and extremely scratch-resistant on the outside).
Goggle with mounted faceguard with a clear polycarbonate lens with 180° panoramic visual field. Anatomical shape and soft material allow close, yet comfortable fit. Fits comfortably over most prescription spectacles. Frosted top to reduce glare. High-quality, easily adjustable headband. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Fall-stop device, 2,5 metre strap, with integrated shock absorber. Plastic casing. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with snap hook with 65 mm gate opening. Only for vertical use. Weight: 1.64 kg. Max user weight: 140 kg.
This is the first Box Cutter in the world with a ceramic knife. The special shape of the handle protects your hand from injury. Open boxes quickly and safely. For extra safety, the blade automatically slides in when the button is released. Replacement blades: 1027188
Double safety line, 1.5 metre length, consisting of kernmantle rope with integrated shock absorber. Safety line tested according to sharp side test and thus extremely reliable for use near sharp edges. Double safety line to allow continuous protection, even when switching between two anchor points. Fitted with one standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
Low shoe Helium in water repellent ECOLORICA with non-metallic toecap and anti-perforation sole. Inner lining in textile, anatomically shaped foot-bed. Outsole: PU/TPU. Sizes: 36-47.
White lightweight, all-round clog in moulded, antibacterial EVA. Side ventilation holes for better breathability. Anti-slip Nitrile sole. With adjustable strap for heel support. Sizes: 37-46. Not PPE.
Reusable cold / hot pack. Helps with sprains, muscle tears, bruises and headaches etc. The cold / hot pack cannot be placed directly on the skin when used due to use. Freezing or burning symptoms (use the supplied Velcro bandage for this).
50 alcohol testers including mouth piece for single use in counter display.
Very durable and super comfortable glove, seamlessly knitted in a nylon fabric with a double nitrile coating. Glove is fully coated for applications involving a lot of oil or water. The glove provides excellent grip.
Safety Scissors Secumax 363. Stainless steel scissors, suitable for all industries. Dimensions: 134x8x65.5mm
Low shoe in white synthetic material, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: H2S with alarms at 5PPM and 10PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Light safety spectacles with green Variomatic sunproof lenses and black flexible frame. Lenses coated with uvex variomatic darken within 10 seconds to provide the wearer with 100 % protection against UVradiation, and return to their original tint after 30 seconds - quicker reactions than any other coating. With the Supravision Plus coating: antistatic, scratch resistant on both sides, antifog and antistatic inside and out.
System for attaching most types of chemical gloves to the garment sleeve through the use of 2 concentric rings. Very easy to attach your chemical gloves to the Chemmax coverall. 1 box contains 5 sets for 5 coveralls (10 black and 10 white rings). For use with CHEMMAX 1,2 and 3 coveralls. In line with EN 14605 Type 3 in combination with coveralls.
Lightweight overall with hood, made of SMMS polypropylene, intended for limited use in dry conditions. Combines protection against dirt and non- hazardous substances with high comfort and breathability. Features nylon zipper with flap, external seams and elastic at wrists and ankles.
Cover for TR-600 can be combined with filter TR-6710E.
Innovative protective spectacle, perfectly fit the face. Individually adjustable side arms with variable inclination. Integrated Softflex zone ensures outstanding wearer comfort for all head sizes. Softflex nose piece ensures comfortable, pressure-free fit and remain firmly in place. Soft ear and Softflex bridge pieces ensure a secure fit in any situation. Supravision Plus coating: anti-fog on both sides, scratch- resistant and antistatic.
Belt bag for storing your Martor safety knife. Example: Secupro625, Secumax 363, ballpoint pen, safety scissors. Made in black nylon with loop, sturdy and wear resistant. Dimensions: 215x68x40mm
Thermal shirt with long sleeves in 84% bamboo/11% spandex/5% polyester. Very good thermal properties in cold or medium cold environments, regulates humidity, permanent anti bacterial, flatlock seams, highly stretchable, perfect fit. Available sizes: XS-7XL. Available colours: black.
Durable anti-cut quality leather welding gloves in cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 8-9-10-11.Length cuf: 15 cm.
Modern jeans trousers in 100% denim cotton (395g/m²) met CORDURA kneepockets for protection against abrasion and durability. Triple stitched seams, ruler pocket, hammer loop, double rear pocket, 2 side pockets. Available sizes: waist; 29-44", length; 30-36". Available colours: dark blue (denim).
Fall-prevention device, 6 metre webbing strap, with integrated shock absorber. Plastic casing. Almost immediately stops any vertical drop motion. Rotatable hook ensures strap does not twist. Serves as connection between anchor point and harness. Only for vertical use.
Fall-stop device with 3.4 metre strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, mercury vapour and particulates.
Coverall, 50% polyamide, 50% polyurethane, 170 gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zipper under double storm flap with press stud fastening, elastic in the waist, windstopper in the sleeves, adjustable press stud fastening at the bottom of the leg. Complies with: EN 343.
Long john with fly in 100% polypropylene (130g/m²). Elasticated waist, stitched seams, good breathablity and moisture management, thermally insulating, stain resistant, comfortable and ecologic. Available sizes: S-3XL. Available colours: grey anthracite. No PPE.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
Low shoe in waterresistant nubuck leather, with a steel antiperforation sole and steel toecap. Fitted with a padded bellows tongue and ankle protection. Outsole in VIBRAM, SRC antislip. Removable, polyurethane insole with textile layer. Sizes: 39-47.
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with snap hook with 65 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
This apron is made of polyethylene and is recommended for use in the food industry. Available colors: Blue, green, yellow, red and white. Dimensions: 117 * 69cm.
Premium sweater with hood and 2 side pockets which can be closed with a zipper. This item also has an arm pocket that can also be closed with a zipper. The inside of this sweater provides extra comfort. Quality: 80% Combed Cotton / 20% Polyester, American Fleece, 300 g / m. Available sizes: XS-3XL. Available colors: Navy, Bordeaux, black and gray.
High shoe in waterresistant black full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Sympatex liner. Outsole in PU/Vibram, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
Waistpants with great flexibility. Stretch fabric across seat, crotch and knees area to provide extra freedom of movement. Leg pockets with zipper. Back pockets with flap. Attachment for holster pockets. Hidden button at front. By unpicking the red stitching at the hem the trousers can be lengthened by 5 cm. Quality: 65% polyester, 35% cotton, 245 g/m². Available colors: red, sky blue, navy, green, beige, gray and black. Available sizes: C32-C50.
Cut and heat resistant arm protector 35 cm., with thumb opening. Ergonomic design. Protects 21 seconds against contact heat of 100°C (test report)
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Fleece in 100% polyester (300g/m²). Straight collar, 2 front pockets, zip closure. Available colour: navy. Available sizes: XS-3XL.
Jacket Shift with zipper, 1 chest pocket on the left with concealed press studs, sleeves with adjustable press studs, 2 inset side pockets with press stud fastening, reflective piping, D-ring, extended back. Quality: 65% / 35% polyester / cotton, 2/1 twill weave, 245 gr / m². Available colors: Charcoal gray, black / gray and navy / gray. Available sizes: S-4XL.
The Multinorm Fleece Jacket is made from 60% modacrylic, 39% combed cotton and 1% carbon with a fabric weight of 280 g / m2. This product is EN ISO 11612 (protection against heat and flame) and EN 1149 (protection against electrostatic properties) certified. The fleece jacket is ideal to wear in cold and bad weather conditions. Available sizes: XS-5XL. Available colors: Marine. Compliant with: EN ISO 14116, EN 1149-5: 2008 and EN 14058.
Safety spectacle made out of PC. Has a anti-scratch and anti-fog coating.
High shoe in waterresistant black nubuck leather and textile, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU/Elastopan®, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
95 impregnated wipes of 15x15cm, cleaning and disinfecting. Bactericidal and fungicidal. Disinfect after 5 seconds of contact time. The tissues do not dry out in the packaging. Use biocides safely. Always read the label and product information before use.
Flame retardant ARC T-Shirt with round neck and knitted cuffs. Quality: Cantex Jersey 170AT, 170 g / m². Available colors: Navy. Available sizes: XS-4XL. Conforms to: EN ISO 11612: A1 + A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5.
Hi-vis bib pants TX52: Durable polyester / cotton fabric with a Texpel dirt-resistant finish UPF 50+ fabric blocks 98% of UV radiation Reflective striping to be more visible 10 storage bags Phone pocket Knee pad pockets, sold separately Hem adjustable with Velcro for a good fit. Quality: 65% Polyester, 35% Cotton 245g Available sizes: S-2XL. Available colors: Fluo yellow / navy and fluo orange / navy. Conforms to: EN ISO 20471 class 2.
Safety vest consisting of 100% polyester with a velcro closure. Available in: fluorescent yellow and fluorescent orange. Sizes: XS-5XL.
Brushed fleece body warmer with long zip. Brushed on both sides. Two front pockets, contrasting zips and decorative stitching on the sleeves. Elastic tape on the bottom hem and cuffs. Quality: 100% polyester, 280 g / m² Available sizes: S - 5XL. Available colors: Black, Navy, Lime, Gray, Blue and Red.
