BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Kevlar work trousers with concealed zipper, 2 back pockets with snap button, thigh pocket with flap and cell phone pocket, ruler pocket with tool loops, Cordura® knee pockets, hammer loop, Kevlar® thigh reinforcement, reflective piping. Quality: 65% / 35% cotton / polyester, canvas, 320 gr / m2. Available sizes: 44-66, 47-57. Available colors: Black / gray.
Women's Shift trousers with concealed zip, thigh pocket with concealed press stud fastening, 2 inset side pockets, ruler pocket with tape measure pocket, 1 back pocket with concealed press stud fastening, D-ring, reflective piping, adjustable elastic at the waist. Quality: 65% / 35% cotton / polyester, 290 g / m2. Available sizes: 34-54. Available colors: Navy, black and gray.
Low shoe with upper in hydrofugated, breathable, abrasion resisitant fabric (PES + Microfiber). Fitted with a Gore-tex liner. VIBRAM Outsole, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-48.
3M ™ Solus ™ 2000 with brown PC lens and adjustable ear branches. The glasses are available with a Scotchguard coating (anti-scratch and anti-fog). Marking: 5-2.5 1 FT KN.
Shift work trousers with concealed zip, thigh pocket with concealed press stud fastening, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, Cordura® knee pockets, 1 back pocket with concealed press stud fastening, reflective piping, D-ring, extra insert at crotch to prevent tearing. Quality: 65% / 35% polyester / cotton, 2/1 twill weave, 245 gr / m². Available sizes: 44-66. Available colors: Navy / gray, black / gray, and charcoal gray. Compliant with: EN 14404.
Ladies softshell Shift with zipper, 1 chest pocket with zipper, 2 inset side pockets with press stud fastening, front pockets, adjustable sleeves by using. Velcro, adjustable waist by means of drawstring, D-ring, reflective piping on front and back of shoulders, inner pocket with velcro. Quality: 92% / 8% polyester / elastane, 320 gr / m2 Available sizes: XS-4XL. Available colors: black / gray and charcoal gray.
Salvequick Textile Finger Bandage are extra long textile plasters, soft and flexible. Easy to wind around a finger and for more hard-to-reach places. Dimensions: 120 x 20 mm.
The 3M™ Peltor™ WS LiteCom Plus earmuff is a high-performance hearing protector with a built-in communication radio for cable free short-range communication with other LiteCom Plus headsets and portable two-way radios programmed on the same frequency. The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. Bluetooth® multipoint-connectivity. SNR: 33dB. In accordance with: EN 352-1
Tunic, tencel / polyester, 195 gr./m², height 72 cm without sleeves. Available sizes: 0-6. Available colors: Black, gray and blue.
Low shoe with water resistant microfiber upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in Artico 3D: antibacterial. Outsole in PU/TPU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
High shoe with brown water resistant microfiber upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in Artico 3D: antibacterial. Outsole in PU/TPU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
Chin strap made of cuir. This model is supple and suitable for Centurion Spartan, 1100, 1125, Concept.
Softshell RWS, 100% polyester, 300 gr / m2, fluor orange, stitched striping, execution in accordance with Rijkswaterstaat guidelines, detachable hood, breathable due to the use of PU interlayer, windproof and water-repellent, stretch softshell for extra comfort, mechanical stretch, 4 pockets on the front, laminated block zipper, good resistance to dirt Available sizes: XS-7XL. Available colors: fluorescent yellow and fluorescent orange. Complies with: EN ISO 20471 Class 3.
Hi-vis parka with flame retardant lining and filling. Antistatic, high visibility, flame retardant, waterproof and breathable. With hood and several pockets. Quality: 98% Polyester, 2% Antistatic Carbon Fibre, Breathable, PU Coated. Available colours: Navy/hi-vis yellow and navy/hi-vis orange Available sizes: XS-6XL.
Chainsaw bib-and-brace in 65% polyester / 35% cotton (85g / m²). 6 layers cut-resistant protection. Fly with zip, 2 inset pockets 1 patch pocket for pleat and system for attaching the spark plug key, Zipper and button on the right side, Elastic waistband on the back, 2 adjustable elastic braces with buckle, Chest top with pocket with vertical zipper on the right side and 3-needle stitching on the back. Available color: gray / orange. Available sizes: S-4XL. Compliant with: EN 381-5 class 1.
Bretelles sylviculture en 65% polyester / 35% coton (85g / m²). 6 couches protection anti-coupure. Braguette avec fermeture à glissière, 1 poche plaquée sur le pli et système de fixation de la clé de la bougie, fermeture à glissière et bouton sur le côté droit, taille élastique à l'arrière 2 bretelles élastiques réglables avec fermeture à boucle, haut de poitrine avec poche avec fermeture à glissière verticale à droite, coutures à 3 aiguilles à l'arrière. Couleur disponible: orange fluo / noir et jaune fluo / noir. Tailles disponibles: S-4XL. Conforme à: EN 381-5 classe 1 et EN ISO 20471 classe 2.
Jacket, stand-up collar, long sleeves, sleeves and collar made of CUTEX® (cut-level 5), front and back made of performing fiber 70400, thumb loop, full zip with zipper: High-Tec Performance Cutex® for maximum safety Optimal protection at the workplace Cut resistance: EN 388 Section 6.2: Cut level 5 Cut resistance: EN 388 ISO 13997: D Heat and flame protection: EN ISO 11612: 2008 Code A1 / B1 / C1 Antibacterial and sweat-absorbing Pleasant freedom of movement due to special knit construction Flexible, stretchy and lightweight fabric for a long lasting well-being and wear comfort. Available sizes: S-4XL. Available colours: Hi-vis yellow/orange.
The Merton rain jacket with fixed hood, two inset pockets and sleeve narrowing by press studs is made from a very supple but highly protective fabric. This flame retardant and anti-static jacket protects you from water penetrating but remains breathable at the same time making this jacket very comfortable to wear. Quality: 100% FR Polyester knitting with FR PU coating + AST; ± 240 g/m². Available sizes: S-3XL. Available colors: Navy.
Hi-vis softshell Belenos 12653 with: Waterproof zipper; 1 vertical chest pocket; 2 front pockets; 1 inner pocket with velcro; 2 slanted reflective bands on the front and back and sleeves; 1 vertical reflective band on each shoulder; Bottom with elastic cord and 1 cord stopper on each side. Available sizes: XS-3XL. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 class 2.
Coverall Force+ with concealed press stud fastening, 2 inset side pockets, 2 thigh pockets with flap, 1 breast pocket with flap, 1 back pocket with flap, knee pockets, elastic in back, sleeves with adjustment press studs, reflective tape on shoulders, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS Available sizes: 44-66 Havep. Available colors: Blue / gray, Black / gray and gray / yellow. Conform: EN 1149-5, EN 11611 class 1 A1, EN 11612 A1 B1 C1 D0 E0 F0, EN IEC 61482-2 class 1.
Safety glasses with grey polycarbonate lens fitted with an anti-fog and scratch resistant coating. Soft materials around the earbranches for reducing the pressure.
Expected life span : 5 years, with 3 years warranty. When there is a gas alarm, the bell icon on the display will iluminate, along wiht an indicator next to the sensor in alarm, so workers can quickly clear the area. Calibration and bump testing is still required. LEL IR sensor is always calibrated on methane, but more possibilities in other sensors . Smart sensors: data is saved on the sensor instead of on the detector. Compatible with Intellidox for Icon or nest when an other Intellidox is in use.
4-points chinstrap for Pheos helmet. No PPE.
High shoe in waterresistant, breathable Putek®, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a br eathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
High shoe in waterresistant, breathable Putek®, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a br eathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 38-48.
Low shoe in velours and textile, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
High shoe in waterresistant full grain leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a br eathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/Nitril Triftane X, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Low shoe in waterresistant full grain leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU/Elastopan®, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Elbow brace with: Perforated neoprene; Spandex mesh in elbow crease; Binding and pre-curve design; Adjustable hook and loop strap. Available sizes: S-2XL.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEK CO P filter for protection agiainst CO and from vapours and mists that may originate in case of fire, dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia ant its derivates, as well as dusts, fumes and mists. Suitable for use in ATEX environments.
Flame retardant signaling vest (RWS) Flame retardant mesh / Stitched seams / Exterior: V-neck / Zipper / Back length 70 cm (L). Quality: 98% polyester + 2% AST; ± 120 g / m². Available sizes: M-3XL. Available colors: Fluo yellow and fluo orange. Compliant with: EN ISO 14116, EN ISO 20471 class 2 and EN 1149-5.
Lined wind and waterproof jacket with taped seams: • 2-way zip with flap covered with a snap closure • double breast pockets with flap and velcro closure • waterproof zippers • loop for badge holder • side pockets lined with fleece • three large inner pockets • removable and adjustable hood • adjustable sleeves with velcro • adjustable waist • extended back Quality: 100% polyester, 200 g / m² Color: Navy, black and gray. Sizes: XS-4XL.
Salvequick Plastic Plasters are convenient high-quality plasters. The plasters are allergy tested. They are easy to apply, flexible and convenient to use. CONTENT: Each refill contains 45 plasters (27 plasters measuring 72 x 19 mm and 18 plasters measuring 72 x 25 mm). 6 refills/box.
P3 filters with high-resistance shell, with bayonet connection for mask Medopair II. Offer excellent protection aginst solid and liquid particles such as dust, fumes, aerosols. In linet with: EN143
Women's version of the T-shirt exactly 190 with long sleeves: - pre-shrunk material; - 1x1 rib-knit collar; - double thread stitched sleeves and bottom hem; - provided with side seams. Quality: 100% ring-spun jersey cotton, 185 g / m². Available sizes: XS-3XL.
Comfortable half mask in TPE with replaceable A1P3filters . Sizes: S/M and M/L.
Flame retardant, anti-static hi-vis bodywarmer Vikja: Straight collar; Zip closure under flap with touch <(>&<)> close fastening; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket. Quality: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluo orange/navy.
Black clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 35-42.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Comfortable half mask in TPE with integrated and replaceable particle filters. for anti-odour protection against nuisance odour, dust, all types of fumes, oil and water mists and micro-organismes. Light weight, silicone and latex free. Sizes: S/M and M/L.
Comfortable half mask in TPE with replaceable A2P3filters . Sizes: S/M and M/L.
Low shoe in white synthetic material, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
High tactical shoe in black full grain leather.Lining in mesh and in back parts Regi-Tex membrane. Sole in PU/PU. Sizes: 36-50.
Chest guard gives protection in the shoulder, neck and troat. Sizes: XXS- 3XL.
Polo piqué with three-button placket, neck ribbon, side slits and ribbed cuffs. Quality: 60% cotton, 40% polyester, 200 g / m². Available sizes: S-5XL. Available colors: White, dark gray, red, navy, blue, green, black and dark gray.
High shoe made of microvelours, fitted with a 200J toecap. With liner in Climazone in antiperspirant textile and comfortable insole providing extra protection against mildew and heat. Sole made of PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Seemless knitted glove 18 gauge with nylon, spandex, carbon fibres and a FORTIX™ foam nitrile coating on the palm. This glove has ES D-functionalitye certified to EN16350, protection products against electrostatic discharge. It is also touchscreen compatible and dermatologically approved by Dermatest and certified by OEKO-TEX®. The nitrile foam coating offers excellent grip and long lastingprotection. The careful selection of materials, the Ansel ZONZ™ Comfort Fit Technology and proprietary washing process makes the HyFlex® 11-819 a clean, ultra breathable and highly comfortable glove. The glove is latex and silicone free, and laudryable at 40°C. Sizes: 6-11.
Hi-vis polo with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Long sleeves; Flame retardant reflective tape. Quality: 54.5% modacrylic + 44.5% cotton + 1% AST; ± 220 g / m². Available sizes: S-4XL. Available colours: Fluo yellow. Compliant with: IEC 61482-2: 2009 class 1 - EBT 7.4 cal / cm², EN ISO 11612: 2008 / A1 B1 C1 F1, EN ISO 14116: 2008, EN ISO 20471: 2013 / Class 3 and EN 1149-5: 2008.
Flame retardant balaclava with high protection against Electric Arc in double tricot with ELIM: 22.0 cal/cm², EBT: 27.0 cal/cm², APC 2. 20% recycled cotton. Extra protection over the shoulders. Available size: Universal. Available color: Navy. Complies with: EN ISO 11612 A1B1C2F1 and EN 1149-5.
Inherently flame-retardant metal-free switch pants. The pants have a zipper over the full length of the legs (outside) and are made of supple, wind- and water-resistant softshell material. Removable braces with fix-lock closure. Loops at the waist. Side pockets with flap. Front pocket with flap. Two-way zipper in the legs. With comfortable heat seal reflection. Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1+A2 B2 C2 F2, IEC 61482-2 APC 2 (ELIM: 40.0 cal/cm² EBT: 44.0 cal/cm²), EN 1149-5, EN 13034 type PB[6] and EN SO 20471 class 1.
This super light coverall offers excellent flame retardant protection. The Araflame coverall is soft and breathable but has great tensile and tear resistance. Perfect for use in industry including the oil, gas and petrochemical industries. The coverall features three-needle stitching, secure pockets and an elasticated waist for easy movement. Quality: Araflame Plus 93% Meta-aramid, 5% Para-aramid, 2% Carbon Thread 150g. Available colours: navy and orange. Available sizes: 38-54 PW. Complies with: EN 1149-5 and EN ISO 11612 A1+A2, B1, C1, F1.
Hi vis softshell in a breathable and waterproof fabric with PU membrane. 2 side pockets, 1 chest pocket, 1 inside pocket and 1 sleeve pocket. Pulling cord, adjustable cuffs and fixed hood. Available sizes: XS-7XL. Available colours: hi vis yellow/navy, hi vis orange/navy, hi vis orange/green.
Gloves designed for work in cold working conditions. The combination acrylic/spandex in the seamless liner (13 gauge) combines a light weight with warmth and suppleness. The double latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: 7(S)-11(XXL).
This polo shirt is produced from a durable material that consists of 50% combed cotton and 50% polyester. The polo shirt does not lose shape and color during washing and drying and maintains its excellent quality at all times. The polo is finished with a 3 button closure and comes as a straight model with side slits. This product is washable at 60 degrees. Quality: 50% Cotton / 50% Polyester, 180 g/m². Colors available: Navy, Royal Blue, White, Dark Gray, Black and Red. Available sizes: XS-5XL.
Automatic safety knife for right-handed and left-handed use Stainles Steel blade and handle without paint. Metal detectable, for use in food and pharma industry. Handy Format no tools needed to replace the blade
Signalization polo with mesh under the arms for maximum ventilation. Very light, moisturizing, strong and supple. Welded and segmented reflective tapes. The polo has a permanent anti-bacterial effect that fights odors. Quality: Sio-Cool Comfort: 100% polyester; ± 130 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: S-3XL.
Helmet hat Solid from the brand BUFF. High breathability. Moisture regulation and bacterial treatment. Available sizes: S/M and L/XL. Available colours: Fluo yellow and black.
Set of 2 flexible straps for exoskeleton Liftsuit. Color: Red. Strength: Strong.
Very comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point and positioning belt. Straight leg straps easily adjustable. Shoulder straps adjustable. Tires made of dirt-resistant and wear-resistant webbing. Harness very easy to put on. Built-in fall indicator. Comfort padding on leg straps and hip belt. Maximum user weight including material: 140kg.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW FLEX and BW ICON Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
These tights provide thermal protection, keep the body dry and help expel odors, keeping the wearer cool, dry and comfortable in strenuous conditions. Quality: 93% Moisture Wicking Polyester,7% Elastane, 165g/m². Sizes: S - 2XL. Colours: Black.
Low shoe in full grain leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 34-42.
Insole for female; Available in different heights: Level 1 (wide), Level 2 (standard), Level 3 (small); Very good moisture absorption and release properties; wear-resistant; Suitable for all ESD-compatible safety shoes certified with this insole.
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the work trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have nail pockets. Quality: Cantex Weld, 365 gsm. Sizes available: 44-64, 146-156, 96-120 EU. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, IEC 61482-2: APC 1, ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm².
Low shoe in velours leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.