BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Plastic hearing protector with ergonomic design. The ideal protection against noise from compressors and pneumatic tools. Model with folding headband and sealing filled with fluid and foam.
Light yellow hearing protector made of a combination of plastic and stainless steel. Very light model with ergonomic design with sealing filled with fluid and foam.
Plastic hearing protector with ergonomic design. The ideal protection against loud noise. Model with fork style headband and sealing filled with fluid and foam.
Welding gloves made of grey, very high-quality nappa leatherwithprotective cuff. The 15 cm protective cuff is made of cowsplitleatherand the fingers have reinforced seams, but these gloves nonetheless have remarkably good tactility. industrial welding (TIG). Sizes: 9 and 11
High shoe in full grain leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in leather. Outsole in Rubber/PU, SRC antislip, oil and carburant resistant. Removable, breathable, anti-static insole.. Sizes: D (37-49), XD (39-49).
Durable quality leather welding gloves in red cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 9-10-11-12. Length: 35 cm. welding.
Earmuff X2 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 31dB.
Gloves with American cut, with heat resistant cowsplit leather (to 350 ° C), lined with molton wool around the hand and the cuffs, veinprotection, cuffs made of natural split leather with Kevlar seams.
Welding glove in top quality A-grade nappa leather with ergonomic protective cuff in red split leather. Extra comfortable because of a very high dexterity, an elastic on the back, a wingthumb model and strong kevlar seams. Suitable for industrial welding jobs (TIG) where high precision is required. Available sizes: 9, 10 and 11.
Large particle pre-filter, for installation between dust filter and spark arrestor in Adflo motor unit. Prevents rapid clogging of g as and dust filters, which increases the service life. Very useful for work in very dusty environments.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin of top quality, Full grain goatskin of top quality, Cat. II, White, yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for assembly work . EN 388:2003, 2111 EN 407:2004, 412X4X
ABE1 filter protects against organic and inorganic gases and sulphur dioxide. Can be used in combination with the Adflo motor unit. If ABE1 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation o n a single battery is desired. Class 1 gas filter: for max. concentration of 0.1%.
Trousers, Bizweld™ 330g, Designed to give maximum protection and comfort to the wearer, our Bizweld™ Trousers will keep you safe. The garment has a Flexi-Fit waistband; twin stitched seams for extra stength and side pockets with a conveniently placed rule pocket for quick and easy accessibility.
Earmuff X1 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. Small housing. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 27dB.
Twin pack dust filter protects against highly toxic dust, mist and smoke particles. Can be used in combination with the Adflo motor unit. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
Earmuff X4 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New noise reduction pads for better noise reduction, and 'spacers': an extra seal ring which reduces resonance. Despite recent innovations, these earphones have an extra small housing. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3 respiratory and eye protection. SNR: 33dB.
Lightweight welding safety glasses in polycarbonate with Pressure Difffusion Temple technology for perfect and secure fit. This glasses have very good colour recognition, Scotchgard anti-fog coating, a large field of view and brings resistance to UV-rays.
Fire resistant air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
Spark arrestor that prevents dust filter in Adflo motor unit from catching fire. Can be placed in grey portion of Adflo motor unit.
Earmuff X3 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. 'Spacers': an extra seal ring which reduces resonance. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 33dB.
Thin unlined welding glove made of soft and durable goatskin with Kevlar seams, REACH compatible.
Welding gloves made of grey cowgrain leather with 15 cm protective cuff and cowsplit leather backing. Safe seam reinforcement around the fingers. Sizes: 10.
This high-quality welding jacket is made of split cowhide and stitched with para-aramid thread. It provides enhanced protection to the hull during welding and is designed to last in the toughest conditions. Features: CE certified. Class 2 welding protection. Concealed easy to open closure. Velcro adjustable cuffs for snug fit. Designed to be worn under harsh conditions . In line with : EN ISO 11611 Class 2 (A1)
Goat leather welding glove, unlined. Good finger sensitivity. Split leather cuff with Kevlar seams. Length 31 cm. Sizes: 7-11.
Standard Li-ion battery for adflo motor unit from Speed Glass.
Battery LI-ON, heavy duty, for Adflo motor unit. Allows approx. 8 hours of work if a combination of dust and gas filters are used on the Adflo motor unit.
Automatic welding cassette with three automatically darkening welding filters. Width of welding filter: 54x107mm. Battery life: 2500 hours.
Full set ergonomic motor unit for air welding helmets with speed glass. With two dust and/or gas filters. Not for use in closed areas. Set includes a motor unit, standard Li-on battery, charger, air hose, pre-filter, dust filter and flow indicator. Equipped with visual and auditory low flow alarm. Battery life: approx. 8 hours, when used with dust filters. Flow rate: 170-200 l/min. Weight of motor unit: 1.16 kg. NPF: 50.
Earmuffs X5 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New damping pads increased damping, and 'spacers': an extra seal ring that reduces resonance. Adjusted easily using 'grip areas' on the top and bottom, durable, ergonomic and very light in relation to a noise-reduction. Can be combined with 3M respiratory and eye protection. SNR: 37dB.
Leather welding apron. With adjustable braces for a better fit, 1 large chest pocket and 1 front pocket with velcro. Kevlar® stitched seams. Available size: 1 size (91x58cm).
Automatic welding cassette with three automatically darkening welding filters. Width of welding filter: 73x107mm. Battery life: 2000 hours.
Retractable hose (525-850 mm) in PU for Adflo motor unit.
Air hood with safety helmet PC/polyester with hinged visor and fire resisteant Nomex full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 200 with compressed air, 500 with Jupiter or Versaflo.
Charger for batteries LI-ON for Adflo motor unit. Batteries must be charged for four hours.
A2 filter protects against organic gases and vapours. Can be used in combination with the Adflo motor unit. If A2 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation on a single battery is desired. Class 2 gas filter: for max. concentration of 0.5%.
Complete kit with Speedglas heavy duty welding helmet G5-01, welding filter G5-01TW, Adflo particle filter, adflo motor unit and carrying case.
Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
Hose to connect Adflo motor unit to air hood. In heavy duty rubber.
Durable anti-cut quality leather welding gloves in cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 8-9-10-11.Length cuf: 15 cm.
Automatic welding helmet from the G5-01 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. Adjustable airflow distribution with three automatically darkening welding filters. Width of welding filter: 73x109mm. Battery life: 1500 hours.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X.
Welding glove made of high-quality split cowhide leather with cotton lining and heat-resistant Kevlar seams.
Face seal for 9100 AIR hoods.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
This premium quality welding trouser is made from split cowhide leather and stitched with para-aramid thread. It offers enhanced protection to the wearer when welding and is designed to last in the toughest environments. Made with cowhide leather for a premium finish Class 2 welding protection Button front closure Wider belt loops for wider belts Designed to be worn in a tough work environment CE certified UKCA marked Shell Fabric : Split Cowhide Leather, thickness 1.3 mm Available sizes: S - 3XL
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Storage or transport bag for adflo motor unit. Only for motor unit, not suitable for storing helmet. No PPE.
Protection sleeve breathing hose Adflo. No PPE.
Fire resistant protection seal for breathing tubes BT. No PPE.
Heavy flame retardant and antistatic welding jacket in 74% viscose/15% aramide/10% polyamide/1% AST (425g/m²). Hidden zip fastening and press-studs. Extreme protection against radiant heat and molten metal. Ergonomically shaped sleeves, high collar, inset pockets, interiour pocket, sleeve pocket. Adjustable waist and cuffs, hidden D-ring and loop for ID pocket, ventilation underneath armpits, elongated back, reflection and reflective piping. Available sizes: XS-4XL. Available colour: anthracite.
Robust, but soft and comfortable welding trousers in 74% viscose/15% aramide/10% viscose/1% antistatisch (425g/m²). Inset pockets, cargo pockets with flap, preformed knees with adjustable knee pockets, rear pockets with flap, ruler pocket with adjustable fastening, reinforced at bottom of legs. Available sizes: 44-64. Available colour: grey anthracite.
Designed to give maximum protection and comfort to the wearer, the Bizweld™ sleeves will provide protection in hazardous conditions. The elasticated cuffs ensure a flexible but comfortable fit. Must be worn with a suitable coverall or jacket/trouser combination. Quality: 100% Cotton, FR Finish. Available sizes: Universal. Available colours: Navy.
The M-985 Earmuff Assembly allows 3M™ Versaflo™ M-100 Series and M-300 Series users to use headgear-mounted earmuffs. SNR: 28dB In accordance with: EN 352
Welding cap with elastic back. Quality: Cantex 1210, 350 g/m².
PFAS free and inherently flame retardant work jacket in Cantex Weld on the front and sleeves, and Cantex Weld/Cantex Weld Stretch on the back. Available sizes: XS-4XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Welding helmet from the 9100 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. To be combined with Adflo or V-500 regulator. With hinged visor. Cassette not included.
Face seal for 9100 MP hoods. Not seperately certified as PPE.
The first automatic welding mask with a curved auto-darkening filter - especially for TIG welding! Previously, automatic darkening filters were always flat. If you wanted a larger field of vision, you needed a larger helmet with plenty of room for it. Because the curved cassette is around the face, it is possible to fit a large field of view (150mm x 76mm) in a very slim mask. Light level 2.5, dark levels 8-12. Equipped with natural color technology for high-contrast vision. Four arc sensors ensure that the G5-02 shifts reliably even at very low TIG settings. G5-02 can be securely connected to the smartphone via Bluetooth via the 3M Connected Equipment app.
Odour filter that removes unpleasant odours. Does not provide protection from gases or vapours, only improves comfort. If gas filter s are already being used, it is unnecessary to use an odour filter. Can be used in combination with the Adflo motor unit. Suitable f or: processes involving chemical risks.
Speedglas braces compatible with the Caterpillar Compact Air and Barisoft belt.
Automatic welding cassette with three automatically darkening welding filters. Width of welding filter: 45x93mm. Battery life: 2800 hours.
Welding helmet from 9100 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. To be combined with Adflo or V-500 regulator. Cassette not included.
Welding bumpcap from the 9100 MP Lite series in durable, lightweight material. Delivered with Adflo PAPR but without cassette.
Flame retardant welding dungarees in a particularly comfortable fabric with extremely good welding and protective properties against radiant heat and metal splashes. Adjustable braces with concealed fix-lock closure. Chest pocket with flap and key ring. Inside pocket. Side pockets. Back pockets with flap. Upper leg pocket with flap. Ruler pocket with adjustable opening. Pre-shaped knees with height-adjustable knee pockets on the inside. Fluorescent substance at the bottom of the pipes. Strong wear-resistant fabric at the bottom of the dungarees. Length and short sizes are produced to order. Quality: Outback HW, 425 g / m². Firming substance, HTFR Dobby, 270 g / m². Available colors: Antra (gray). Available sizes: 44-64, 146-156, 84-120. Conforms to: EN ISO 11612: A1 + A2 B1 C1 F1, IEC 61482-2: CL.2, EN 1149-5, EN ISO 11611: CL.2 A1 + A2, EN 13034: TYPE PB [6], ARC RATING: 12.3 cal / cm².
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. Available sizes: 44-64, 84-120, 146-156 SCA. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Seams made out of Kevlar. Fitted with a breathable liner in 3D-mesh. Outsole in PU/VIBRAM rubber, SRC antislip, oil and carburant resistant. SOFT+ Gel insole in BASF Dynamic polyurethane, cushions pressure points, improves the distribution of weight and heel shock absorption. Anatomical, perforated. Sizes: 35-48.
Replacement filter for Adflo odour filter. Odour filter that removes unpleasant odours. Does not provide protection from gases or va pours, only improves comfort. If gas filters are already being used, it is unnecessary to use an odour filter. Can be used in combin ation with Adflo odour filter.
The 6-position battery charger organizing stand for Adflo battery chargers provides the ability to charge six batteries at the same time (you still need individual charger per battery). Saving both time and hassle. Compatible with legacy NiMH batteries and the new Li-ion batteries. Flexible installation: either mount on wall or stand-alone.
Face seal speedglass 9100 air.
This classic American Overall protects the entire lower body. The large chest pocket is ideal as a storage place for tools and personal belongings. Other useful features are the double ruler pocket and the back pocket with flap and elastic bands for comfort and freedom of movement. Quality: Bizflame Plus. Available colors: gray <(>&<)> navy. Available sizes: S - 3XL. Complies with: EN 1149, EN ISO 11611.