BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case (1034120) when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: O2 with alarms at 19.5% and 23.5% Vol. (min. 18% and 25% Vol.) Range mesure: 0-25% Vol IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: CO with alarms at 20PPM and 100PPM. (min. 5PPM and 200PPM) Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: H2S with alarms at 10PPM and 15PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Simultaneously check and display up to five atmospheric hazards with the GasAlertMicro 5: explosion measurement and 4 toxic gases. PID meter for measuring volatile organic substances. The GasAlertMicro 5 is compatible with BW<(>&<)>#146;s MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms. Supplied with data logging, rechargeable batteries and charger. Fitted with a built-in pump. Version: LEL, O2, H2S and CO. IP rating 65 and Atex approved.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWs automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
New portable fixed life 4-gas detector designed specifically for general workers and users. No live gas readings, and no training needed. When there is a gas alarm, the bell icon on the display will iluminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area. It is maintenance free and has a fixed life of 2 year. Calibration and bump testing is still required. LEL IR sensor is always calibrated on methane.Compatible with Intellidox for Icon or nest when an other Intellidox is in use.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: SO2 with alarms at 2PPM and 4PPM. (min. 2PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values: 1,6 - 3,2ppm.
