BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Mobile yellow container for general areas. The chemical and water resistant container protects the content against dirt, moisture an d damage. Content: 50 pads (41 x 51 cm), 12 socks (7.6 x 122 cm), 6 pillows (43 x 48 cm), 1 pair of gloves, 2 pairs of safety glasse s, 3 disposal bags, 1 emergency response handbook. Absorption capacity: 123 litres. The absorption material in the spill kit is of O P quality.
Flexible, chemically resistant PU sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions: 50 x 50 cm.
Anti-static absorbent pads measuring 41 cm x 51 cm. These heavy-weight perforated pads are packaged in a box. Packaged per 100 piece s. These pads are made of 1-ply melt-spun polypropylene with 2-ply spun non-woven fabric for extra tear resistance. Can be used for cleaning parts. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacit y: 84 litres.
Mobile yellow container for general areas. The chemical and water resistant container protects the content against dirt, moisture an d damage. Content: 50 pads (41 x 51 cm), 12 socks (7.6 x 122 cm), 6 pillows (43 x 48 cm), 1 pair of gloves, 2 pairs of safety glasse s, 3 disposal bags, 1 emergency response handbook. Absorption capacity: 124 litres. The absorption material in the spill kit is of M RO quality.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, includes a car ry strap for hanging the mask around the neck. Features click connection for demand valve with quick-coupling Automaxx-AS.
Mini-Cable Locking System in Mini Cable Locking System. Locks both hand wheel taps and interrupters. Not PPE.
Seamless knitted aramid and steel wire glove, fitted with a palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish. Sizes 7, 8, 9 and 10.
Msa’s replacement hard hat 6-point fas trac suspension offers a combination of advanced features for a comfortable and secure fit. I s has a quick and easy adjustment.
Acrylic lining without seams, PVC coating, thickness 1.1 mm, length 30 cm. The lining protects against cold (up to -20°C), is comfortable and efficient. The PVC is highly resistant to most chemical products. Good tear resistance. Washable at 40°C with a neutral detergent. Sizes: M(8)-XL(10).
Absorption cloth with dimensions 38 cm x 48 cm. These lightweight cloths are packed in a box. Available per 100 pieces. These cloths are made from recycled materials and to absorb 50% more than polypropoyleen canvases. Ideal for absorbing all industrial fluids, including oils, water, solvents and coolants. Absorption capacity: 121 liter.
Bracket for wall mounting of test gas bottles of gas of 34, 58 and 110 liters.
Release for mounting on gas bottle for testing or calibration of gasdetection devices. To use in combination with dockung station.
Sign according GHS normation in self adhesive polyester: acute toxicity. Size: 100x100mm. 4 labels per card. No PPE.
Black/yellow striped pole with plastic base. Height: 900mm.
Head protection in Tecaweld for Speedglas 9100. Not separately certified as PPE.
Sweat band for air caps, S-133, S-333, S-433 and S-533.
Absorption roll 38 cm x 46 m. Material: 100% polypropylene. Features: heavy duty, white padded absorbent, with high absorption capacity and low-lint, does not take up water, very economical to use, absorption capacity 94 litres, weight 6.8 kg. Application: for practically every industrial application.
Spill truck XL for absorption of chemical liquids with content: 20xHAZ124 - 1000421136xHAZ412 - 100421016xHAZ1818 - 1004213150xUN100-E - 1004202
Antistatic absorption clothes on a roll with dimensions 48 cm x 44 m, every 46 cm perforated. Package: in a bag. polipropylene. Ideal to absorb all industrial liquids, including oils, water, solvents and cooling solvents. Capacity: 192 liter per 2 rolls. Convenient for all industry types.
Lanyard without absorber 2M carabiners
Galvanised emergency shower for vertical installation with stainless steel spray head. Shower head with self-regulating 76l/min flow regulator. Axion shower with rotating spray movement for better decontamination. Stainless steel pull handle. Pictogram SP177 included. No PPE.
Stainless steel cover that protects the eyewash heads as well as the bowl.
First Aid box white painted metal, wall model, double-door with lock and key. With 2 handles. Removable interior shelves Dimensions: H.53cm, W. 53cm, D.19cm.
Inflatable splints Pneumasplint. Set of 4 splints packed in inflatable bag, such as to be used as a cushion. (leg, arm, hand and fo ot)
Back Pack Trauma Bag: Emergency supplies carried in on your back. Reflective trim. Material: polyester.3" padded shoulder straps w/refletive striping and phone hold. First aid supplies not included.
Disposable overpressure suit for connection to compressed air net. Equipped with large visor for a wide field of vision. Panic strip ensures that it can be removed extremely quickly. Equipped with CEJN series 341 coupling. Suit made of blue lamination with fixed gloves Kemblok.
Evaporative Cooling Vest: Soak in cold water, and enjoy cooling relief and comfort. With V-neck with zipper closure, nylon outer layer, polymer-embedded fabric inside, water-repellent liner and black cotton- poly elastic trim. Washable.
Replacement hood for breathing hood S-855E in PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
Ambidextrous black neoprene wrist support with reversible hook and loop strap. No PPE.
For collective lock-out situations involving a large number of employees and equipment. Can also be used as a storage unit for locks. The contents can be easily viewed through the transparent front plate. 18 brackets for keys and 2 slots for locks. Components not included
Holder for plastic blades, rectangular plastic scrapers, to scrape surfaces without damaging them. Single holder supplied without blades. Offer with replacement blades: 1021522 for delicate surfaces
Ergonomically styled Cutter for use with plastic sheeting and foamed material. For use by right- and lefthanders. The TEFLON®-coated metal base slides readily across any surface for controlled cutting operations. Blade change within seconds. OPTICUT No. 437: with hold-down clip designed to prevent material build-up ahead of the blade edge and to keep fingertips SAFELY away! Push-cut model. OPTICUT No. 436: with reversed hold-down clip. Pull-cut model. OPTICUT No. 435: Same as No. 436, but with additional lateral protector. Replacement blades: 1014310
A handy Scraper made of plastic with retractable single-edge razor blade. "GS - TESTED FOR SAFETY". No PPE. Replacement blades: 1019408.
These No-Hole interrupter locks are extremely versatile and easy to install due to patented thumbscrew design. You do not need a scr ewdriver. Simply secure the lock firmly to the switch, pull the clamp over the thumb screw and lock to prevent the clamp from loosening. Removable fittings (included) extend the number of useful power interrupters. Suitable for padlock brackets with diameter up to 7 mm
Spray for the cleaning and rinsing dust and dirt from eyes and wounds. The spray provides a gentle stream of moisture and has a total rinsing time of 5 minutes. The spray can be used several times and is sterile to the last drop. Contains 150ml sterile saline solution 0.9%NaCl. Environmentally friendly propellant. Fits in the first-aid station.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Sizes: S - XXL.
220 gsm, 100% nylon, 6-panels, 3M reflective contrast trim on peak , tear release fastening. Colours Orange and Yellow EN 471 certified.
Half ice-grip overshoe made of supple, stretchable rubber for simple attachment over safety shoes. The sturdy metal studs provide a firm, powerful grip and stability on snow and ice. Can be used in temperatures to -40°C.
Replacement visor for Vision Plus helmet. Has a anti-scratch and anti- fog coating.
Face shield in black steel mesh. Designed for use with V5 visorsystem for attachment on 3M™ G3000 of G22 Series helmet.
Batteries 4AA alcaline for head and hand light CPO ATex (1015073).
Stainless steel wall holder for box of disposable gloves. Dimensions: width 255mm x Height 132 mm x Depth 85 mm.
100 long plasters measuring 18cmx2cm.
Replacement power adaptor for GasAlert-devices.
Secubox maxi without symbol. Dimensions: 236x315x200mm. With fixation material. No PPE.
Safety helmet made of ABS, fitted with a 4-point textile suspension with slip adjustment (54-62cm) and synthetic sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.
Comfort for static kneeling situations. Closed-cell foam is non- conductive, resistant to petroleum, and silicone-free. Beveled safety edge, convenient handle. Dimensions: 46 X 91 X 2,5cm. No PPE
The 3M™ Headgear G500 provides a versatile and comfortable solution for wearers who require both face and hearing protection. With special design features making it easy to combine the headgear with other 3M safety product such as face shields, passive earmuffs or communication headsets and integrated eyewear.
Anchorage for I-beams ranging from 6.35 to 30.48 cm. Maximum thickness of beam 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Replacement knife for scrapers Schaber. Packed per 10 pc.
Red steel, lockable fireproof box for storing safety register. Dimensions: W 34 cm H x 6 cm D x 25 cm. Clearly indicate when ordering whether print must be in Dutch or French.
Very comfortable fall protection harness with 2 attachment points on the back and chest, positioning belt and D ring at the navel for descent. Full D chest anchor point. Leg and shoulder straps are easily adjustable. Extra lining on shoulder and leg for greater comfort; also easy to put on. Chest and leg straps fitted with quick release belts. Straps made of wear and abrasion resistant Repel webbing. Harness is very easy to put on. Integrated fall indicator.
Welding glove in cowhide split leather, lined with Kevlar seams. Length 34 cm. Sizes 8, 9, 10 and 11.
Safety signs - eye wash available. Measure: 250x250mm.
Safety signs - wear protective clothing. Diameter: 200mm. Colour: White on blue.
100 x rolled latex fingertips.
Skin tone: with pad made of viscose wadding, covered with thin polyethylene film which allows moisture to escape but does not stick to the wound. The plasters are perforated, individually wrapped. To cover and protect small superficial wounds. Pack containing 40 items.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: SO2 with alarms at 2PPM and 4PPM. (min. 2PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Spray can made of stainless steel. This can is useful for safely dampening cleaning rags, sponges, etc. with flammable or environmentally harmful liquids. A spring-operated PE pump system pumps the liquid out of the can. The spray stream is adjustable. Capacity: 1 litres.
Content for first aid kit Q50BE (Art: 1031054). Dutch and French docs always included
Light hat in 100% polyester (125g/m²) with 5 panels. Preformed panel in recycled PU, adjustable size by velcro, removable label, can be used for embroidery and/or transfer print. Available size: uni. available colours: navy, pink.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Vibram outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
Baxter safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below. Elastic headband included. Brown polycarbonate lens with anti- scratch and anti-fog coating.
Automatic welding cassettekit 9100XXi with three automatically darkening welding filters. Width of welding filter: 73x107mm. Battery life: 2000 hours.
Goggle with panoramic view, fits over most corrective glasses. With polycarbonate lens in CSP coating with anti scratch and antifog coating. Equipped with an adjustable elastic strap, so the soft mount properly to fits the face. Weight: 86g.
The PROTAC amplifies all the ambient noise to a level that allows you to hear it better. It allows you to hear better and protects you during those moments when protection is necessary. Ideal for automatically blocking peak noise above 82 dB. You will be able to communicate as normal. Settings are stored when removed. Automatic shut-down in the event of non-activity for 2 hours.