BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Polyurethane hose that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Length: 525 - 850 mm. Hose adaptable in length. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick- connect coupling.
Motor unit Versaflo TR-302E+can be combined with hoods of M and S series. With filter cover and air flow indicator. Heavy Duty Battery, charger,length adjustable air hose BT-30, dust filter and pre-filters are included. Can be combined with filters TR-3712E, TR-3802E, TR-3822E and BT- hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Flow: 190L / min. Weight: 1095 with filter, belt and battery. NPF: depending on chosen hood.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Spark arrestor that prevents dust filter in Adflo motor unit from catching fire. Can be placed in grey portion of Adflo motor unit.
Motor unit Versaflo TR-302E+ can be combined with hoods of M and S series. Includes filter cover and air flow indicator. Can be combined with filters TR-3710, TR-3800, TR-3820 and BT-hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Battery, charger, air hose belt and filters can be ordered separately. Flow: 190L / min. Weight: 1095Gr with filter, belt, battery. NPF: depending on chosen hood.
Standard Li-ion battery for adflo motor unit from Speed Glass.
Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
High capacity battery as spare spart for motor unit Versaflo. 10 to 12 hours with new filter. No PPE.
Battery LI-ON, heavy duty, for Adflo motor unit. Allows approx. 8 hours of work if a combination of dust and gas filters are used on the Adflo motor unit.
Easy-to-clean belt for TR-600.
Charging station for 1 battery with power.
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Full set ergonomic motor unit for air welding helmets with speed glass. With two dust and/or gas filters. Not for use in closed areas. Set includes a motor unit, standard Li-on battery, charger, air hose, pre-filter, dust filter and flow indicator. Equipped with visual and auditory low flow alarm. Battery life: approx. 8 hours, when used with dust filters. Flow rate: 170-200 l/min. Weight of motor unit: 1.16 kg. NPF: 50.
Adapter for TR-600 to be combined with backpack BPK-01.
ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE
Haevy duty backpack to carry the motor unit Adflo and Versaflo R-300, TR-600 and TR-800 comfortlaby on the back.
Charger as accessory for motor unit Versaflo. No PPE.
Spark protector to protect filters against sparks.
Spark catcher as accessory for motor unit Versaflo. No PPE.
High capacity battery for TR-600. Weight: 620 grams. Usage duration depends on the filters used.
Standard battery for TR-600. Weight 450 grams. Usage duration depends on filters used.
Cover for TR-600 and TR-800 to be combined with filter TR-6110E and TR-6130E.
Retractable hose (525-850 mm) in PU for Adflo motor unit.
Hose of strong neoprene that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. Length: 840mm. Not for Atex environments.
Charger for batteries LI-ON for Adflo motor unit. Batteries must be charged for four hours.
Standard fabric belt as spare spart for motor unit Versaflo. No PPE.
Charger for 4 batteries.
Tool to fix the atex battery TR-830 to the Atex motor unit TR-802E. No PPE.
Complete kit with Speedglas heavy duty welding helmet G5-01, welding filter G5-01TW, Adflo particle filter, adflo motor unit and carrying case.
Cover for TR-600 can be combined with filter TR-6710E.
Long hose of lightweight PU that connects between Versaflo or Jupiter motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. PU hose, in combination with explosion-proof battery and Versaflo or Jupiter motor unit cover, makes a motor unit suitable for use in Ex zones. Length: 965 mm.
Multicharger for 4 batteries, high capacity, as accessory for motor unit Versaflo. No PPE.
Braces as spare spart for motor unit Versaflo. No PPE.
Hose to connect Adflo motor unit to air hood. In heavy duty rubber.
Cover for TR-600 can be combined with filter TR-6310E.
Backpack to carry the motor unit Versaflo TR-300, TR-600 and TR-800 comfortly on the back. Easy to clean and adjust.
Protective cover disposable for air tube in PU convenient for air caps.
Storage or transport bag for adflo motor unit. Only for motor unit, not suitable for storing helmet. No PPE.
Fire resistant protection seal for breathing tubes BT. No PPE.
Disposable protective cover against contamination by splashes and spray mist, for Versaflo TR-600 and TR-800.
Protection sleeve breathing hose Adflo. No PPE.
Belt, decontaminable, as spare spart for motor unit Versaflo. No PPE.
Intrinsically safe (Ex-proof) battery for SR 500 EX motor unit.
Radiant heat resistant protection seal for breathing tubes BT. No PPE.
Intrinsially safe motorunit specially designed to be used in potential explosive atmospher, to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Comes with: motorunit, battery, charger ,belt, filter adaptors for P3 filters, set P3 filters, 10 pre filters, filter cover caps, tube vaseline, and flow meter.Not for confined spaces. Flow rate: min. 175 or 225 L/min. .Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Harness to carry fan units SR500/SR700 on the back. No PPE.
3M™ Versaflo™ BT-63 Length Adjusting Breathing Tube is designed to be used with 3M™ Full Facepiece Respirators 7907 S Series, 6000 Series, and half face masks 7500 Series and the 3M™ Versaflo™ Powered Air Purifying Respirator TR-600 and TR-800.
SR500 motorunit to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Not for confined spaces. Flow rate: min. 175 or 240 L/min. Included: battery, battery charger, belt, 2x P filters, 2x filter adapters, 2x pre-filter holders, 10 prefilters, flow meter, user instructions, cleaning wipe, plug kit.Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Complete kit with SR 500 fan unit and protective helmet SR 570, 1 protective film, standard battery, battery charger SR513, belt SR508, 2 pieces of SR510 P3 particle filters, 2 filter adapters, 10 prefilters SR221, 2 prefilter holder, flow meter, plug kit, cleaning tissue and user instructions. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Speedglas braces compatible with the Caterpillar Compact Air and Barisoft belt.
Welding bumpcap from the 9100 MP Lite series in durable, lightweight material. Delivered with Adflo PAPR but without cassette.
Motor unit ready to use with safety helmet with integrated dust filter for protection against solid particles and water-based aerosols. Provides all-in-one respiration, head and face protection. Motor, battery and filter are integrated into helmet. Fitted with battery that provides approximately 5 hours of autonomous operation. Includes flow indicator that shows when the minimum flow rate is not achieved. Kit contains: hard hat, motor, 2 batteries, charger p-filter, peel off visor. Flow rate: min. 170 l/min. Weight of helmet: 1,3 kg. NPF: 500.
The 3M ™ Versaflo ™ BT-64 Breathing Hose is a heavier and more robust breathing hose with a fixed length to use for heavy work. This BT-64 Breathing Tube connects approved 3M close-fitting facepieces to 3M motor-powered systems to ensure clean air reaches the facepieces with unrestricted airflow. The breathing tube is supplied with the 3M ™ TR-973 Air Flow Indicator. The BT-953 cleaning and storage kit can be ordered separately. For use with 6000 and 7907S series full face masks, and 7500 series half masks in combination with the Versaflo TR-600 and TR-800.
Harness to carry fan units SR500 EX on the back. No PPE.
Complete kit with SR 500 fan unit and protective helmet SR 580 with polycarbonate visor. Contains, SR 500 fan unit, SR 580 helmet, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: 500.
Kit with SR 500 EX fan unit and face shield SR 570 with triacetate (TAC) visor. Contains, SR 500 EX fan unit, SR 570 face shield, battery SR 501 EX, battery charger SR 513 EX, PVC belt, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs pre-filter holder, flow meter, plug kit, cleaning wipe and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Complete kit with Speedglas heavy duty welding helmet G5-03 Pro Air grinding hood under welding hood, with welding filter G5-01/03 VC, Adflo particle filter and Adflo motor unit, and carrying bag. (without safety helmet adapter)
The 6-position battery charger organizing stand for Adflo battery chargers provides the ability to charge six batteries at the same time (you still need individual charger per battery). Saving both time and hassle. Compatible with legacy NiMH batteries and the new Li-ion batteries. Flexible installation: either mount on wall or stand-alone.
Cover for TR-600 can be combined with filter TR-6820E.
Ergonomically shaped with clear full colour LED display. Uses 3 standard thread filters (only approved with RSG filters); autonomy to max. 8 hours. With visual vibration and audible alarm for low flow or saturation of dust filter. Air flow can be set. IP65 approved for decontamination under the shower. To be combined with all air hoods from the T-air series with hose 1035014, or with full face mask 500E together with hose 1046652. NPF: depends on the mask used.
EX battery charger for the fan unit SR 500 EX. No PPE.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, easy-clean belt, flow meter, battery and charger, one P-filter and a pack of préfilters. NPF: Depends on hood used.
Hose to connect C40 regulator with hood.
Complete kit contains, SR 500 fan unit, SR601 hood, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.