Low safety shoe in microfibre with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.

High safety shoe in microfibre with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.

High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.

Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.

Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask, with new improved exhalation valve. Protects against organic gases and vapours with a boiling point >65 °C, plus harmful dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. Sizes: universal. NPF: dependent on the filter used.

Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%. Sizes: universal. NPF: dependent on the filter used.

J-Energy series with Adidas Boost Technology. Low hygiene shoe in microfibre with protective aluminium toecap, synthetic antiperforation sole, comfortable Infinergy sole (PU/E-TPU) and Memory ESD insole for optimal absorption of perspiration moisture. Lining in 3D-mesh.

Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. This glasses have very good colour recognition, a large field of view and brings resistance to UV-rays.

P filter for motor unit Versaflo TR-300. Protects against highly toxic dust,mist and smoke particles. Filters provide a spark guard to prevent the
filter, and make possible the shower decontamination. Saturation of the
filter is only detectable by an increase in (inhaling) resistance, a
motor unit will alarm.
line with: EN12941.

ABE2K1HGP filter for motor unit TR-600 and TR-800. Protects against organic and inorganic gases, sulphur dioxide, ammonia, mercury vapour and dust particles. Can be combined with filter cover TR-6500FC.

Polyurethane hose that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Length: 525 - 850 mm. Hose adaptable in length. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick- connect coupling.

Lightweight disposable breathing hood with hood made of WEB 24 and visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 100 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.

3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with an anti-scratch and anti-fog coating. Marking: 2C-1.2 1 FT KN.

Motor unit Versaflo TR-302E+can be combined with hoods of M and S series. With filter cover and air flow indicator. Heavy Duty Battery, charger,length adjustable air hose BT-30, dust filter and pre-filters are included. Can be combined with filters TR-3712E, TR-3802E, TR-3822E and BT- hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Flow: 190L / min. Weight: 1095 with filter, belt and battery. NPF: depending on chosen hood.

Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.

Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.

Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 170 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.

The Secure Fit safety spectacle is comprised of a rimless lens and fixed-length temple arm. An integrated side-shield is included for added protection. Temples also feature 3M Pressure Diffusion Temple Technology which helps diffuse pressure over the ear to enhance frame comfort across a diverse workforce. This innovative design promotes improved comfort and security of fit.

Prefilter as spare spart for motor unit Versaflo TR-300. No PPE.

ABEP filter for TR-600 and TR-800 motor unit. Protects against organic and inorganic gases, sulphur dioxide and particulates. Can be combined with filter cover TR-6100FC.

Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Visor in actetate in order to be able to clean the visor with thinner. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.

Pre-filter for TR-600. Ensures longer life of main filter.

AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6300FC.

Motor unit Versaflo TR-302E+ can be combined with hoods of M and S series. Includes filter cover and air flow indicator. Can be combined with filters TR-3710, TR-3800, TR-3820 and BT-hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Battery, charger, air hose belt and filters can be ordered separately. Flow: 190L / min. Weight: 1095Gr with filter, belt, battery. NPF: depending on chosen hood.

High capacity battery as spare spart for motor unit Versaflo. 10 to 12 hours with new filter. No PPE.

Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.

P filter for TR-600 motor unit. Protects against highly toxic dust, mist and smoke particulates. Clogging of the filter can only be detected through an increase of the (breathing) resistance, motor unit will then sound an alarm.

Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.

Charger as accessory for motor unit Versaflo. No PPE.

ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE

Very light safety spectacles with polycarbonate lenses. 3M ™ Pressure Diffusion Temple Technology that helps distribute pressure across the ears to improve frame comfort for a firm and comfortable fit. The 3M ™ Scotchgard ™ Anti-Fog Coating offers superior anti-fog and scratch-resistant properties.

High capacity battery for TR-600. Weight: 620 grams. Usage duration depends on the filters used.

Standard battery for TR-600. Weight 450 grams. Usage duration depends on filters used.

Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.

Cover for TR-600 and TR-800 to be combined with filter TR-6110E and TR-6130E.

Hose of strong neoprene that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. Length: 840mm. Not for Atex environments.

Charger for 4 batteries.

Tool to fix the atex battery TR-830 to the Atex motor unit TR-802E. No PPE.

Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable lin er in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 37-47.

Cover for TR-600 can be combined with filter TR-6710E.

Long hose of lightweight PU that connects between Versaflo or Jupiter motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. PU hose, in combination with explosion-proof battery and Versaflo or Jupiter motor unit cover, makes a motor unit suitable for use in Ex zones. Length: 965 mm.

Multicharger for 4 batteries, high capacity, as accessory for motor unit Versaflo. No PPE.

Cover for TR-600 can be combined with filter TR-6310E.

Lightweight breathing hood made of WEB 24 with PE visor. Hood with neck and shoulder protection. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. With internal knit collar under the hood for better sealing. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.

Protective cover disposable for air tube in PU convenient for air caps.

Lightweight disposable breathing hood with hood made of PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.

Disposable protective cover against contamination by splashes and spray mist, for Versaflo TR-600 and TR-800.

AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6100FC.

Low shoe S3 in synthetic microvelour with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35- 52.

Lightweight breathing hood made of WEB 24 with PE visor. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.

3M™ Versaflo™ BT-63 Length Adjusting Breathing Tube is designed to be used with 3M™ Full Facepiece Respirators 7907 S Series, 6000 Series, and half face masks 7500 Series and the 3M™ Versaflo™ Powered Air Purifying Respirator TR-600 and TR-800.

High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.

Lightweight breathing hood made of WEB 22 with PE visor. WEB 22 material captures paint particles, preventing the paint particles on the wearer from getting onto the work piece. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For spray painting applications, special raw material of hood and visor can be cleaned with thinner. Weight: 315 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.

ABEK1P3 filter in plastic housing for 3M Secure Click half face masks. Protects against anorganic and organic gases and vapours with a boiling point > 65°C, sulphur dioxide, acidic gasses and vapours, ammonia, organic ammonia derivates and toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%.

P3 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.

The 3M ™ Versaflo ™ BT-64 Breathing Hose is a heavier and more robust breathing hose with a fixed length to use for heavy work. This BT-64 Breathing Tube connects approved 3M close-fitting facepieces to 3M motor-powered systems to ensure clean air reaches the facepieces with unrestricted airflow. The breathing tube is supplied with the 3M ™ TR-973 Air Flow Indicator. The BT-953 cleaning and storage kit can be ordered separately. For use with 6000 and 7907S series full face masks, and 7500 series half masks in combination with the Versaflo TR-600 and TR-800.

Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.

Cover for TR-600 can be combined with filter TR-6820E.

P3 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.

A2P3 filter in plastic housing for 3M Secure Click half face masks. Protects against organic gases and vapours and toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%.

Dust filter holder for attachment of dust filters secure click series D7900 to 3M secure click gas filters. No PPE.

P2 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.

P2 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.

A2 filter in plastic housing for 3M half face masks Secure Click. Protects against organic gases and vapours with a boiling point >65 °C. Dust filters series 7900 can be mounted on gas filter if dust filter holder D701 is used. Class 2 gas filter: for max. concentration of 0.5%.