BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Glove with extremely smooth and efficient carrier nitrile foam coating. Glove gives very pleasant feeling and thus provides increased comfort. Excellent grip in wet or oily conditions thanks to the foam nitrile coating. Conform: EN388: 4.1.3.1.X, EN 407 X.1.X.X.X.
Fully seamless, grey, knit gloves with grey PU coating on a white HPPE / Lycra liner. Available in: grey/white. Sizes: 7/ 8 / 9 / 10 / 11 / 12.
knitted cut resistant glove (8cm cuff) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Available sizes: 7-12. Conform: EN 388 4.X.4.2.C and EN 407:X.1.X.X.X.X.
Fully seamless, grey, knit gloves withgreyPU coating on a white Dyneema® liner. Available in: grey/white. Sizes: 8 / 9 / 10 / 11 / 12.
Completely seamless gloves made of nylon with polyurethane coating on the palm. Extremely high wear comfort due to breathability, perfect fit and optimal tactility. Available in: grey, white. Sizes: 7 / 8 / 9 / 10 / 11 / 12.
Very flexible and seamlessly knitted glove with a black nitrile foam coating. Nylon/spandex liner and thin nitril coating give improved ventilation and comfort and very steady and dry grip in humid and oily conditions.
Cut resistant, completely seamless grey knit gloves with grey PU coating. Excellent tactility combined with highest level of cut protection. Sizes: 7/8/9/10/11. Suitable or: circumstances in which a good grip and cut, abrasion or puncture resistance are required, such as packaging, installation, assembly, automotive industry, glass and paper industry.
Seamless glove in nylon / polyester with polyurethane coating on the palm.Good wearing comfort because of large breathing ability, a perfect fit and optimal sensitivity. Suitable for packaging industry, assembly,electronics, inspection, painting. Sizes: 7-11.
Glove with very high cut protection, suitable for handling very sharp parts in the glass and metal industry.
Gloves made of sturdy, top-quality cowgrain leather. Driver Vachette has a perfect fit, reinforced seams along the fingers and high tactility.
Antistatic nylon gloves (24 cm) with foamy insulating layer nitrile on the palm. KnitzonzTM technology increases flexibility and comfort in congested areas, which means less fatigue. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Latex and silicone free. Sizes: 6-11.
Leather glove with cotton back and reinforced seams. Good fit and dexterity. Basic quality. Sizes: 7-12.
Ultra-thin glove in 100% nylon with a Polyurethane (PU) coating. The 18 gauge carrier offers incredible comfort, finger sensitivity and feels like a second skin. The PU coating is silicone free and does not create contamination on painted objects. Lightweight so hands are well ventilated. Very abrasion resistant coating. Ideal for applications in dry conditions, such as light assembly, precision tasks, light logistic activities. Due to its full black colour, this glove is ideal for contaminated environments. Available sizes: 6-11.
Cut resistant glove without seams with silicon-free PU coating. Wrist and forearm protection thanks to a long 15 cm cuff. The coating gives a very good grip in work requiring good dexterity in dry conditions. The glove liner is a combination of HPPE, fiberglass and nylon, and has, due to very dens knitting, a very high cut resistance. Usage: Situations where adhesion, cut resistance, tear and perforation are required, such as packaging, assembly, the automotive industry, the glass and paper industry.
The lightest and most comfortable cut resistant glove (18 gauge) thanks to the use of Dyneema Diamond Technology. A perfect synergy of high sensitivity, cut resistance and comfort. This glove has an excellent performing thin nitrile foam coating (without silicones) with an exceptionnal grip on oiled or slippery surfaces and gives contact heat protection upto 100°C. Thanks to its light weight and the Dyneema® Diamond fibre, your hands stay well ventilated and get a "cool" grip. No use of glass fibre or any other external cut resistant fibres so the cut resistant properties remain intact. Ideal for use in applications such as assembly of thin parts or montage. Available sizes: 7-11.
The lightest and most comfortable cut resistant glove thanks to the Dyneema® Diamond fibre and technology. A quality combination of high sensitivity, cut resistance and comfort. The Dynablade PU Light has a polyurethane (PU) coating which gives you exceptionnal grip. Thanks to the special Dyneema® fibre your hands are kept cool and ventilated. A no use of glassfibre guarantees a longer duration of its cut resistant properties. If you work in applications such as assembly, packaging or logistics, this glove is a must have. Available sizes: 7- 11.
Goat leather gloves of standard quality with cotton back and reinforced seams. A perfect fit and high tactility make these gloves a real favourite. Tropic is available in two versions: Tropic EC (standard quality) and Tropic (super quality).
Seamless glove in nylon / polyester with polyurethane coating on the palm. Good wearing comfort because of large breathing ability, a perfect fit and optimal sensitivity. Suitable for packaging industry, assembly, electronics, inspection, painting. Sizes: 7-11.
Glove with extremely flexible and thin liner in stretch material with high-performance nitrile foam coating. Glove gives a very soft, cool and pleasant feeling and ensures breathability (sweat is quickly drained) for excellent wearing comfort. All materials of the glove are Oeko-Tex certified. 15 gauge Glycose / Glycerol sustainable liner Production of this liner reduces the CO2 emission with 67% compared to standard nylon. Solid grip in dry and oily circumstances. Touch-screen functionality. Protection against a short contact heat of 100 ° C. Available sizes: 7-11. Conforms to: EN 388: 2016: 4.1.2.1.X and EN 407 X.1.X.X.X.X.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (18 gauge) with insulating layer nitrile foam/aqua PU in the palm, with extra coating between thumb and forefinger.Heat resistant up to 100°C contact heat. Sizes: 6-11.
Cut resistant (HPPE) winter glove, completely seamless grey knit gloves with black nitrile coating. Inside warm winter lining. Glove combines dexterity with high cut-resistance and good protection against cold. Sizes: 8/9/10/11.
These supple and comfortable outdoor gloves are made of water repellent cowgrain leather and fitted with an efficient and elastic 5 cm cuff. Sizes: 9 / 10.
Very durable and super-comfortable all-round gloves. Seamlessly knitfrom a polyester/cotton blend yarn. Powergrab really lives up to itsname: the glove provides an excellent grip, while it also has a comfortable, supple fit. Highly recommended for warehouse work, handling and various industrial tasks. Also a good choice for use in the building industry!
Comfortable, cut resistant glove using the unique Dyneema® Diamond Technology. Its 13 gauge lining has double the cut resistance in comparison with a concurrential glove, but keeps comfort at a high level (high sensitivity and a cool feeling). It has a polyurethane coating with high grip and without silicones. Cut resistant properties are guaranteed because no glassfibre is being used. Perfect for use in dry environments with high cut risks such as paper and glass industry, assembly or logistics. Available sizes: 7-12.
"Wonder Grip® Thermo" is an evolution of "Wonder Grip® Thermo Lite", with a doubled latex coating and a 10-gauge acrylic pile loop liner. The napped acrylic liner makes the hands feel warmer in cold conditions. Furthermore, "Wonder Grip® Thermo" can be used in a below-freezing environment. Sizes: 7(S) -11(XXL).
Nitrile coated gloves with a tricot cuff that fits closely around the wrist. Nitrogrip Light is extremely supple to wear and provides both fine tactility and a good grip. Sizes: 8 / 9 / 10.
Welding gloves made of grey, very high-quality nappa leatherwithprotective cuff. The 15 cm protective cuff is made of cowsplitleatherand the fingers have reinforced seams, but these gloves nonetheless have remarkably good tactility. industrial welding (TIG). Sizes: 9 and 11
Goat leather gloves of top quality with cotton back and reinforced seams. A perfect fit and high tactility make these gloves a real favourite. Tropic is available in two versions: Tropic (top quality) and Tropic EC (standard quality).
Seamless glove with nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
Thin black work glove with blue nitrile coating on a seemless nylon liner. Approved for food contact. A close fit, breathable and co mfortable glove.
Glove with double nitrile coating on a very thin and supple lining in nylon/spandex. The double coating protects the palm and ¾ back from penetration of oils (red nitrile coating) without loss of grip (black nitrile foam). Highest protection in combination with excellent comfort! EN407:2020: X1XXXX
Fully seamless knitted glove with a black PU coating on a blue 15 gauge liner (HPPE / Polyester / fiberglass). High sensitivity, elastic, extra thin and a good grip. Sizes: 7/8/9/10/11. This glove offers the highest comfort combined with an average cut resistance level (class B). Applications: General all-round work glove, light assembly, logistics., Transport and storage. In accordance with: EN388 3.X.4.2.B
Secure grip gloves with nitrile coating. The liquid repellent nitrile coating sheds oil, grease and dust. The open cotton back of the glove provides extra ventilation. Sizes: 9 / 10, with 7 cm protective cuff.
knitted cut resistant glove (cuff 13cm) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. Long for extra protection of the forearm. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Gives protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Conform: EN 388 4.X.4.2.C and EN407: X.1.X.X.X.X.
"Wonder Grip® Thermo Plus" is fully doublecoated with latex on the back of the hand andincludes a 13-gauge napped acrylic liner."Wonder Grip® Thermo Plus" includes both"Wonder Grip® Aqua" and "Wonder Grip®Thermo"s advantages; therefore, it can be usedin situations requiring dexterity in wet and coldconditions.Furthermore, "Wonder Grip® Thermo Plus"maintains dexterity and comfort while keepingthe hands warm. Sizes: 7(S) -11(XXL).
A real innovation within hand protection thanks to the use of new Black Dyneema® Diamond Technology. This new technology grants the Dynablade Foam Black a hight cut resistance level 5 without use of any other cut resistant fibre such as glass fibre or steel. All of this results in a unique and comfortable glove (13 gauge). It has a high performance foam nitrile coating (without silicones) with exceptionnal grip on oiled or slippery surfaces. Thanks to the Dyneema Diamond fibre your hands are well ventilated and the glove receives a "cool" grip. The black colour of the glove makes it a perfect solution to be used in grimy environments. Perfect for use in applications where a high cut resistance is needed, such as assembly of thin parts. Available sizes: 7-11. In line with EN 388 4.X.4.2, ISO 13997 Class D.
Knitted cut resistant glove (8cm cuff) with double nitrile coating. A gray smooth base nitrile coating on palm and three quarters back that prevents fluids can penetrate. Moreover, a black foam nitrile coating for excellent grip in dry and wet conditions. The carrier consists of highly cut resistant fibers, nylon and spandex. . Very comfortable and excellent protection against abrasion and cut risks, in many applications where oil is being used. Application: glass industry, metal assembly, plastic injection, etc. ..
Seemless knitted glove in warm and comfortable acryl .Nitrile coating with PVC dots on the palm for a good grip. Touch screen compatible. Food approved. Protects against cold (0°-10°C) as well as heat (100°C for 40sec. and 250°C for 14sec). Sizes: 6,7 and 8 (turqoise) and 9,10 and 11 (ocean blue). Lenght: 26cm.
Supple winter gloves made of yellow cowhide leather with a warm lining. These gloves have an ergonomic design and provide high tactility. Available in: yellow cowhide leather. Sizes: 9 / 10 / 11.
Black, seamless and antistatic glove with nitrile coating on nylon lining. Very suppleand comfortable to wear thanks to seamless lining and ergonomic design. La technologie KnitzonsTM augmente la flexibilité et le confort dans les zones congestionnées, ce qui signifie moins de fatigue. KnitzonzTM technology increases flexibility and comfort in congested areas, which means less fatigue. Optimal tactility and abrasion resistance. Washable to 40 °C.
Soft cut resistant glove that combines confort and durability and offers a good protection agains sharp objects. The nitrile foam coating is DMF-free and breathable, so the hands of the user stay cool all day long. Touch sreen compatible.Sizes 7 - 12.
Seamless knitted Kevlar glove, with palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish.
Cut resistant glove without seams with black silicon-free PU coating. The coating gives a good grip in work requiring good dexterity in dry conditions. The glove liner is a combination of HPPE, fiberglass and nylon, and has, dueto very dens knitting, a very high cut resistance. Usage: Situationswhere adhesion, cut resistance, tear and perforation are required, suchas packaging, assembly, the automotive industry, the glass and paper industry.
A glove with high finger sensitivity provided with a nitrile foam coating on a dark gray medium gray nylon. Made upon the principle: Hybrid Coating Technology. Resistance abrasion perfect and very comfortable to wear. The lining extends to the joints (knuckle coated = KC). The glove is also Oil fugue, more resistant than the PU and is also more resistant when heating the PU. Ideal for any activity where sensitivity in the fingers is necessary as the assembly, assembly, packaging, automotive, etc.. Sizes available: 7-11.
Glove in water-repellent cowhide leather that should be worn over electrical gloves as mechanical and puncture protection (not mandatory for composite models). More spacious model that easily fits over electrical gloves with a velcro closure for an ideal fit. Check the technical datasheet to determine the correct size.
Cut resistant glove made with the latest Dyneema® Diamond technology and a gray, abrasion resistant PU coating. Guaranteed cut resistance (level B) combined in a lightweight glove. (up to 30% lighter). A "breathable" glove, finger-sensitive and a good grip make this a comfortable "second skin". No use is made of glass fiber. According to EN388: 2016: 4.4.4.2.B
Durable quality leather welding gloves in red cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 9-10-11-12. Length: 35 cm. welding.
Gloves made of sturdy, top-quality cowgrain leather with wplit leather back. Has a perfect fit, reinforced seams along the fingers and high tactility.
Gloves with American cut, with heat resistant cowsplit leather (to 350 ° C), lined with molton wool around the hand and the cuffs, veinprotection, cuffs made of natural split leather with Kevlar seams.
Ultra-thin, antistatic gloves with polyurethane coating on palm and seamless lining on the back. Excellent tactility.
Light and thin glove made of seemless knitted nylon/carbon fibre with micropourous nitrile coating. Especially for touch-screen and ESD applications. Sizes: 6-11.
High-quality cowgrain leather gloves. The 10 cm rubber-impregnated cotton protective cuff offers extra protection to the wrist and lower arm. Sizes: 9, 10, 11.
The Grip-Flex Nitril Foam Ultra Light is a special one in its category. With a comfortable 15 gauge nylon/lycra liner, it is very elastic and fits perfectly around your wrists. It almost feels like a second skin. It is as sensitive as a standard PU coated glove but the nitril coating blocks everything going through the liner. Excellent grip on dry and (light) humid surfaces and the foam nitrile coating offers excellent abrasion resistance. Perfect for general working applications such as assembly, fine mechanical work or logistics. Available sizes: 7-11.
Impact resistant glove with cut-resistant liner and nitrile coating. Sizes: 7 (s)- 12 (3xl)
Finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 250°C for 15 sec. Gloves GS industry.
Durable gloves for all extended tasks in cold conditions. 3/4 nitrile coating on seemless polyester lining. Completlely lined with acryl. Sizes: 7 / 8 / 9 / 10 / 11.
Winterglove (beige) in cowgrain leather. Inside lining in white polyester fleece with high protection against contact cold. Topquality leather, soft, flexible. For general applications in winter conditions or work in cold cells. Available in a very wide range of sizes. Sizes available: 8-12. Conform: EN388: 2003: 2.2.4.3 and EN511:2006: X.4.X
Completely seamless gloves made of nylon with polyurethane coating on the palm. Extremely high wear comfort due to breathability, perfect fit and optimal tactility. Available in: white, grey. Sizes: 7 / 8 / 9 / 10 / 11 / 12.
Cut resistant, completely seamless grey knit gloves with black nitrile coating. Excellent tactility combined with highest level of cut protection, even on oiled objects. Sizes: 8 / 9 / 10 / 11.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The full nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex certified.
Cut resistant knitted glove with a foam nitrile coating. The liner or support is made of HPPE, nylon and glass fibre. The foam nitril coating guarantees a fine grip on oiled surfaces. Extra reinforcement between index and thumb. This thin glove combines a medium cut-resistance level (class B) with high comfort (lightweight and dexterity). Applications: General industrial work like machine maintenance or treating sharp oiled objects. Available sizes: 7-11.
These durable and comfortable gloves are made of water repellent cowgrain leather. Driver Hydro has a perfect fit, high tactility and reinforced seams along the fingers.
Industrial protective glove. Synthetic textile liner with a synthetic coating. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF- free, antistatic and food approved. Sizes: 6-11.
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Half nitrile coating on the palm with sand grain finish for extra grip. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.D.P
Very wear-resistant FORTIX ™ nitrile foam coating on a 15-stitch per inch, nylon spandex lining, with coated palm. Tricot cuff. Length 200-275 mm. Grey and black. Silicones free. Sizes: 6-11.
All-round gloves, made of water and oil resistant cowgrain leather. Electra plus has artery protection and a latex cuff. Sizes: 7 / 8 / 9 / 10 / 11.
Guide 6202 CPN - A cut, puncture and needle resistant glove in soft synthetic leather for good versatility and a steady grip. Alycor etechnology in the palm, over the fingertips and the upper surface of the fingertips; protects from needles and other sharp objects. Designed particularly for situations where it is vital to keep sensitivity and where there is a risk of needle puncture and cut injury. The glove is designed fully in black to achieve as low profile as possible. Suitable for police and customs officers, security guards and prison officers where there is a risk of needle puncture and cut injury. Sizes: 6-13
Heat resistant glove in full grain goatskin on the palm and full grain cowhide on the back of the hand. Fully Kevlar lined. Reinforces thumb, index and seams. Oil and water repellent. For use in harsh and moist environments. Size: 7-13.
Samurai® glove made with innovative cut-resistant Bio based Dyneema® Diamond fiber, which is partly sustainably produced based on wood pulp. Palm dipped with nitrile foam coating. This glove combines high cut resistance (class C) with excellent finger dexterity. This glove is Touch Screen compatible. Application: Fine assembly, inspection, logistics activities, machinery operation. Complies with: EN388:2016: 4.4.4.2.C
Blue knitted food approved glove from the Revillet range (per piece) in stainless steel and glass fiber with knitted cuff. This glove has excellent cut resistance, tested according to TDM standard. Prewashed, to make sure it will keep its form after nex washing cycles. Washable. Sizes: 6-11. Size 5 on demand.
Welding glove in top quality A-grade nappa leather with ergonomic protective cuff in red split leather. Extra comfortable because of a very high dexterity, an elastic on the back, a wingthumb model and strong kevlar seams. Suitable for industrial welding jobs (TIG) where high precision is required. Available sizes: 9, 10 and 11.
