BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Superior quality gloves in cowsplit leather, made with Kevlar® fibres for longer service life. The gloves have extra palm, thumb and index finger reinforcement and a 10 cm protective cuff. Available in: green/white. Size: 10, 11, 12.
Blue knitted food approved glove from the Revillet range (per piece) in polyethylene, polyamide, stainless steel fiber with long knitted cuff, does not contian glasfibre. This glove has excellent cut resistance, tested according to TDM standard (ISO 13997 TDM: 62,80 Newton). Treated to be permanent hydrophobic. Prewashed, to make sure it will keep its form after nex washing cycles. Washable. Sizes: 6-11. Size 5,12 and 13 on demand.
Glove made of cut-resistant HDPE material with PU coating. Very finger sensitive. Sizes: 6-11.
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff and palm reinforcement. Attractive, highly visible look with yellow and blue stripes. Available in: yellow/blue.
Chain mail glove made of 100% stainless steel. The closure at the wrist is made with a polyurethane band and press-stud for optimal hygiene and comfort. Reversable and maximum protection against cutting injuries. The wrist band has a different colour for each size.
Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P
Extra thin (18gg) cut resistant glove that keeps the user cool all day long. High dexterity, nitrile coating on the palm and fingers. Approved for use in contact heat up to 100°C (15sec) with reinforced thumb grip and touch screen compatible. Sizes: 6-12. Complies with: EN388:2016 4.X.4.3.C, EN407 X.1.X.X.X.X
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
Superb protection against cuts and abrasion, successor of Hyflex 11-630
A versatile antistatic and latex-free glove with superior cut-resistance and mobility. The exclusive Intercept lining of the glove ensures maximum safety and productivity. The glove has optimal fit and flexibility due to the elasticity of the lining and the elasticity of the coating in nitrile foam. This coating has a breathable character to keep the glove comfortable throughout the day. The Hyflex CR is resistant to heat and scattered molten particle and can therefore be used in various work conditions. Suitable for manipulation and assembly applications in metallurgy, the automotive industry (press department, body department and welding department), the glass industry, the plastics sector. Length 240 mm.
Seamless glove with nitrile 3/4 coating. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. Oeko-Tex standard 100. DMF free, with impact protection on the back of the hand. Sizes 6 - 11.
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s PU coating provides good grip. 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level D, approved for contact heat up to 100°C (15 sec), ESD and Touchscreen compatible. Sizes: 6-12.
Ultra-thin (21gg) and airy glove that feels like 2nd skin, for precision work.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With extra long cuff. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.
PowerFlex®+ 80-602 glove is the practical answer to the safe handling of glass, metal and plastics. It offers exceptional cut resistance and robust overall mechanical performance, plus superior comfort. In both wet and dry conditions, this glove grips superbly. The PowerFlex® 80-600 is truly a unique glove solution that provides the highly efficient combination of protection plus natural dexterity.
A flexible glove with cutting, perforation and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and fingertips from needles and other sharp objects. Knitted in cut-resistant HDPE fibre, giving the whole glove protection level 5. Provided with PU coating from fingertips to over knuckles and therefore suitable for cleaning or working in wet conditions. Extremely wear-resistant coating. Sizes: 8-11.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 305 mm.
Blue knitted food approved hydrofobe glove from the Revillet range (per piece) in polypropylen, polyester, stainless steel and glass fiber with knitted cuff. This glove has excellent cut resistance, tested according to TDM standard. Prewashed, to make sure it will keep its form after nex washing cycles. Washable and waterrepelant. Sizes: 6-11. Size 5,12 and 13 on demand.
Seemless knitted nylon/spandex gloves (18 gauge) with foamy insulating layer nitrile on the palm. Ultra-thin ergonomic design provides extreme tactility to handle small parts easily. It is dermatologically tested and solvent-free and is Oekotex certified for no harmfull substances. Fortix™ Technology delivers extended wear time. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Sizes: 6-11.
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility, brought together in a winter glove.
Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10
Glove with flexible nylon carrier and nitrile foam coating with anti slip design. Glove is very pleasant to wear and thus provides increased comfort. Excellent grip in oily conditions thanks to the foam nitrile coating with anti-slip design. Available in sizes 6, 7, 8 and 9. In line with EN388 3.1.2.1.
Comfortable gloves made of piggrain leather, backed with green cotton. Excellent wearing comfort thanks to ergonomically preformed fingers. Sizes: 9 / 10, with 10 cm protective cuff. Available in: leather/green.
Seemles knitted nylon-spandex gloves (15 gauge) with insulating layer foam nitrile on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Seamless cut resistant glove with double nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Cut resistant S-TEX liner (steel/polyester ,nylon). Sizes: 6 (S) - 10 (XXL)
Guide 6402 CPN offers a unique combination of maximum protection against needlesticks and cuts while maintaining flexibility and comfort. This model is the latest innnovation with needle and cut protection in the palm area. Kevlar in dark gray for heat resistance and cut protection is used on the back of the hand. Suitable for police and security forces when there are risks of cut, puncture and needle injuries. Great grip and tactile feeling. Sizes: 7-12.
The new generation of working gloves offering maximum grip with maximum impact protection. Abrasion resistant nitrile foam coating provides exceptional grip in dry environments as well when working when ther is water, grease and oil contact. Lightweight and breathable seamless liner (13 gauge) with Hook <(>&<)> Loop strap for secure fit all day long. Sizes: 7(S) - 12(3XL).
Seamless knitted glove in yellow high-viz cut resistant ATA® fibres, with double palm and finger coating in nitile Microfinish®. Excellent cutting resistance and good grip in dry, wet and oily condtions. Available in sizes 6, 7, 8, 9, 10 and 11.
Gloves designed for work in cold working conditions. The combination acrylic/cotton/polyester in the seamless liner combines a light weight with warmth and suppleness. The roughened latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: S / M / L / XL.
The ActivArmr® 97-120 delivers the best of both worlds on safety and comfort, thus fulfilling the needs of workers who work in challenging conditions. The excellent mud and oil grip coupled with cutting resistance and impact damping offer hand protection in extreme environments, reduce fatigue and promote productivity. Special technology that makes the glove impermeable to oil keeps your hands clean and dry. Due to the striking colour, users' hands are more visible for greater safety.
Cut resistant arm guard, with unique design so that the sleeve stays in place at hand level and does not curl up. With extra elastic at the wrist. In 13 gauge HXFIBR fiber mixed with polyester and ealstan for a good fit. Suitable for use with food. ESD approved according to EN16350. Available in sizes M-XL.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 40 cm.
The full nitrile coating repels oil and liquids keeping hands dry and protected, whilst the new micropore nitrile palm coating ensures excellent grip in both dry and oily conditions. Conform EN3 88: 2016 level E cut resistance in such a fine touch, lightweight glove is unrivalled in the market place. Available sizes: 6-11.
Cut resistant glove, Nitrile, Palm-dipped, CRF® Technology, Glass fibre thread, Nylon, Polyester, Spandex, 13 gg, Foam grip pattern, Cut resistance level 5, Cat. II, Black, Water and oil repellent palm, for fine assembly work. EN 388:2003, 4544
Economical solution for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless polyester lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.
Welding gloves made of grey nappa leather with protective cuff. The 15 cm protective cuff is also made of quality nappa leather and the fingers have reinforced seams. Available in: grey.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating provides a good grip. 15 gg liner and extra reinforcement along the thumb and index finger. Cut protection level D, approved for contact heat up to 100°C for max.15 sec. Approved for ESD and food safe. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.D, EN407: X.1.X.X.X.X
Goat leather gloves of super quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver (super quality) and Driver EC (standard quality).
Cut resistant gloves knit from Zirnium® thread, length 25 cm.
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Polyethyleen/composite yarns knitted glove with double nitrile coating. First orange coating liquid proof full dipped. Second palm coating in black nitrile foam. Sizes: 6-11.
Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility.
Supple, wear resistant, silicon-free gloves made of nitrile coated gel foam with lining of knit cotton and rubber inner layer to dampen vibrations. Reduces susceptibility to hand-arm vibration syndrome (HAVS) during industrial activities to an absolute minimum. With Velcro closure.
Glove with PE and Zirnium. Extremely good cut resistance.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The glove is fully coated with a double coating layer in the palm, for adequate protection against liquids and oils. Approved for contact with all types of food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
Class 2 welding protection, elasticated cuffs for a secure fit, designed to be worn in a harsh working environment, designed with a comfortable fit, CE certified, this product is sold in pairs, UKCA marked. Outer fabric: split cowhide, thickness 1.3 mm Sizes: one size Standards: EN ISO 11611 Class 2 A1
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
60 cm cut and heat resistant arm protector. Contact heat to 100°C for max . 15 seconds. With thumb hole and Velcro closure on upper arm.
Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.
Strong, ambidextrous blue knitted (13 gauge) gloves made of Intercept Technology® that delivers the highest cut protection level F throughout entire glove and cuff, even after laundering. More durable and stain masking designed for extende use life. Suitable for food processing and services.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and supple model (18 gauge) has a double coated palm for total liquid protection. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and touchscreen function. Sizes: 7-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The nitrile coating in the palm provides excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 5-11. Complies with: EN388:2016 4.X.4.3.C, EN407: X.1.X.X.X.X
Flexible, well-fitting work glove made of Guide HXFIBR™ fibers (13gg) that combine very good cut protection with dexterity. The liquid-tight nitrile coating of the glove ensures for protection against liquids in the palm and protects the knuckles on the top. Touchscreen function and extra reinforcement on the thumb and index finger. Approved for contact heat up to 100°C (15sec.) and suitable for contact with all types of food. Sizes: 7-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
Flexible, tight-fitting winter work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides a good grip. 15 gg liner combined with a 7 gauge acrylic inside lining for cold protection. Cut protection level F, approved for contact heat upt to 250°C (15sex) and food safe. Oeko-Tex approved and ESD tested. Compatible with Touchscreens. Sizes:7-12.
Cut resistant glove made of HPPE and a black, abrasion resistant nitrile foam coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A light weight glove, high dexterity, touchscreen compatibility and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.3.4.2.C, EN407:2020:X.1.X.X.X.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
Very durable and super comfortable glove, seamlessly knitted in a nylon fabric with a double nitrile coating. Glove is fully coated for applications involving a lot of oil or water. The glove provides excellent grip.
Durable anti-cut quality leather welding gloves in cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 8-9-10-11.Length cuf: 15 cm.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 406 mm.
