KIT MOTORUNIT ATEX TR-819E (TR-800)
Brand : 3M
Prod. No. 1042609
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Details
-
Brand
-
UNSPSC46182000
-
Catalogues
-
Against dust and or gas
- Yes
-
Blower unit
- Yes
-
Suitable for
- Pharma
-
- WORKING WITH BLOWER UNITS
Product numbers
Documents
Respiratory protection
Gases, toxic fumes, oxygen deficiency, dust particles, and mists are not always immediately detectable, although they can be life-threatening. Therefore, it is very important to get advice from an expert when you suspect that there may be a risk to the respiratory tract.
This risk, together with the work to be carried out, will determine whether you can work with environment-dependent respiratory protection such as dust masks or half and full-face masks, motor units, etc.
When it is not possible to filter the air present, it is better to opt for environmental-independent breathing protection. These can be air caps or masks that are connected to the compressed air network. When you need to be sufficiently mobile, it is better to opt for a self-contained system such as a compressed air device or an escape mask.
It is also important to know in advance which substance to ‘filter out’ and how much of it.
If that is the case, calculate the Nominal Protection Factor (NPF) and use it to select the right mask with filter. Don’t know which it is in advance? Then you’ll need to opt for the ‘ABEK’ filters.
You will find all leading brands in our range: MSA, 3M, Moldex, Bartels, PureFlo, Honeywell, Genano, Scott, Avon, Spasciani, rsg safety, etc.
Did you find the right product? Then it’s important to check that it fits your face. We do this at Vandeputte by means of a Fit test.
Lastly, you can also contact us for the periodic maintenance of your respiratory protection: refilling compressed air bottles, cleaning and maintaining full-face masks, maintaining and repairing lung vents and breathing apparatus, etc.
.