BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Functional layer 3 wind- and water repellent jacket. Two breast pockets, left with inner phone pocket. ID-card holder. Two side pockets. Sleeve pocket on left arm. Inner pocket on the left side with handsfree opening. Ventilation zippers under armpits. Extended back. Reflective piping on sleeves and back. Adjustable and detachable hood. Fleece lined collar for better comfort. Adjustable cuffs and waist. Quality: 100% polyester. Available sizes: XS - 4XL. Available colors: Black, white, navy, grey, green, sky blue and red.
The Urbino fleece sweater protects against cold and against the thermal risks of an electric arc flashover. The sweater with upright collar and hidden zipper was provided with an elastic hem and an elastic in the sleeve ends. As an added advantage, the soft fleece fabric was treated against pilling. Quality: Double-sided fleece: 54% Protex + 34.2% FR cotton + 10% polyamide + 1.8% AST; ± 310 g / m². Available sizes: S-3XL. Available colors: Marine. Complies with: EN ISO 11612 A1.B1.C2.F1, EN 1149-5, IEC 61482-2 Class 1, EN ISO 14116 and EN 14058.
Soft shell jacket in light stretch material. Two-tone front zip and side pockets. Adaptable sleeves with velcro closure and drawstrings at the hem at the bottom. Zippullers in contrasting color. Quality: 96% polyester, 4% elastane, brushed inside. Available sizes: S - 5XL. Available colors: black, white, navy, dark gray, green, blue and red.
BasePro chainsaw jacket: The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work. The BasePro chainsaw jackets, which are the most economic pair of SIP Protection jackets of the range, still provide the comfort you want, the protection you need and the quality you expect from SIP Protection. Quality: Water repellent 65% Polyester - 35% cotton outer fabric, 210 g/m2. Available sizes: S-4XL. Available colours: Orange/grey.
Worker shorts with back pockets including velcro fastening, two side pockets, the right with a separate phone pocket, two side pockets: the left with a flap with a separate phone pocket inside. Quality: 65% polyester / 35% cotton, 245 g / m². Available colors: black, navy, blue light, red, green and beige. Available sizes: C42 - C64.
Super strong Midi Parka with Cordura on sleeve and yoke piece for extra wear resistance. The Cordura fabric is made from nylon 6,6 fibers and the general feature is that it is resistant to heavy loads. This jacket is extremely suitable for robust outdoor use. Breathable, wind and waterproof with taped seams. Equipped with a double storm flap with a water barrier, a detachable hood, a concealed press stud fastening and an extended back. Warm and comfortable thanks to the inner collar with fixed microfleece and a removable thermal inner jacket. Practical with a vertical breast pocket with laminated zipper, lockable horizontal and vertical side pockets, concealed horizontal breast pockets and a concealed Napoleon pocket. Equipped with an inner pocket with zipper and ID badge and a cable entry for telephone or MP3 player, beard cap and printer zipper. Available sizes: XS-7XL. Available colors: navy, black, kining blue / navy, black / gray and kakhi / black. In accordance with: EN 343 3.3.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
100% acrylic beanie soft touch with lapels. Thinsulate ™ lining. Available sizes: Universal. Available colors: Navy, black and gray.
High shoe in waterresistant pull-up leather, with a synthetic antiperforation sole and carbon 200J toecap. Fitted with a textile 3D- lining . Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Being visible and staying warm, this is what the Sparrow offers you. This robust winter hi-vis jacket has a comfortable, warm, removable fur lining. The fur collar and sleeves, with knitted wind cuffs at the sleeve ends are removable. With an inner pocket and many outside pockets, including a phone pocket, pen pocket and a loop for a badge, you are never short on storage space. Quality: 80% polyester + 20% cotton; ± 280 g/m². Available colors: Hi-Viz orange and hi-viz yellow. Available sizes: XS–4XL.
Hi-vis parka: • wind and waterproof • taped seams • good breathability • detachable hood with adjustable rubber cord • two chest pockets with zippers • two front pockets with zip • D-ring in left breast pocket for ID card • three inside pockets • adjustable cuffs Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow / black, fluo yellow / navy and fluo orange / black. In accordance with: EN ISO 20471 class 3.
A light jacket that offers you a very high level of protection, including ARC protection. This hi-vis Kaldvik rain jacket is made out of the new lightweight (280 g/m²) Siopor® Excell fabric. Different linings can be zipped in this soft and supple jacket. Furthermore, the Kaldvik has many practical features like the possibility of attaching a hood (available separately), narrowing the sleeve ends, 1 chest pocket, 2 inside pockets and a practical zipper grip for easily opening and closing the jacket. Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
High shoe in waterresistant full grain leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a br eathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU/Elastopan® extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Flame retardant and anti-static rain coverall with elasticated waist is made from a supple fabric that moves comfortably along with you. The coverall can be narrowed at the sleeves and ankles by press studs and next to this the sleeves are provided with elasticated windcuffs. Quality: 100% FR Polyester knitting with FR PU coating + AST; ± 240 g/m². Available colours: Royal Blue. Available sizes: S-3XL.
Vlamvertragende in antistatische fleece voering met lange mouwen. Comfortabel dan een warme fleecen voering. Daarnaast is de Troston ook vlamvertragend en antistatisch en kan gemakkelijk in verschillende jassen ingeritst worden. Kwaliteit: Dubbelzijdige fleece: 54% modacryl + 34.2% FR katoen + 10% nylon + 1.8% AST; ± 260 g / m². Beschikbare maten: S-3XL. Beschikbare kleuren: Marine. Conform: EN ISO 11612: 2015 / A1 B1 C2 F1, EN ISO 14116: 2015 / IND.3, EN 1149-5: 2018 en EN 14058.
Hi-vis chainsaw trousers 1RB5: Front fly with zipper 2 inset pockets 1 patched pocket with zipper on the back Elasticated waist with loops for belt and loops for velcro braces (ref. 5SD4). Quality:Water repellent 80% Polyester - 20% Cotton main fabric ± 200g/m². 100% polyester fabric with 100% PU coating; ± 195 g/m². mesh fabric (100% polyester ±140g/m2). Available sizes: S-3XL. Available colours: hi-vis yellow /black, hi-vis orange/black.
Chainsaw trousers 1RB4: Front fly with zip closure - closing by 1 button; 2 inset pockets; Loops for belt; 1 patched pocket with zipper on the back; 1 patched pocket for measuring equipment and fixation of spark plug spanner; Elasticated waist with loops for belt and loops for velcro braces (ref. 5SD4). Quality:Water repellent 80% Polyester - 20% Cotton main fabric ± 200g/m². 100% polyester fabric with 100% PU coating; ± 195 g/m². mesh fabric (100% polyester ±140g/m2). Available sizes: S-3XL. Available colours: Gray/hi-vis orange.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
High visibility winter parka PW3: 5 pockets for more storage; Insulatex lining to reflect heat back into the body, ensuring maximum warmth and comfort; Removable lined hood; Quick-dry knit cuff; Zipped interior pocket; Zip closures under the armpits; Removable badge holder; The drawstring in the hem allows a snug and comfortable fit; Inside pocket. Quality: Industry 300D: 100% polyester, 300D Oxford weave with a stain resistant finish, 190g PU coating. Available sizes: S-4XL Available colors: fluo yellow / black and orange yellow / black. Complies with: EN ISO 20471 class 3 and EN 343 3: 1.
Low-cut, sporty safety shoe in nubuck leather with 200J synthetic toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Padded water tongue. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non- slip, resistant to oil, petrol and acid, high shock absorbency. Padded watertongue. Sizes: D (36-48), XD (39-48).
Bicolor softshell jacket with detachable hood. Contrasting zipper on the front and on the side pockets. Adjustable sleeves with velcro closure. Drawstrings at the hood and at the bottom hem. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Zipper pullers in contrast color. Oeko-Tex 100 certified. Quality: 100% recycled polyester, 280 g/m². Available sizes: S-5XL. Available colors: Blue/Navy, Navy/Blue, Black/Grey, Black/Red, Black/Orange and Gray/Black.
Low shoe in black waterreistant full grain leather with synthetic toecap and synthetic antiperforation mid-sole. PU scuffcap. DryShield membrane. Sole in PU/PU. Sizes: D (36-48), XD (39-48).
Flame retardant and anti-static hat. Provides protection in thermal risk environments. Comfortable and bi-elastic. Available color: Dark blue. Complies with: EN ISO 11612/15, EN 1149-5/18.
Low safety shoe in full grain leather with synthetic antiperforation sole and a steel toe cap. BOA-closing system. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
High safety shoe in microfiber/textile with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
J-Energy series. High shoe in nunuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a brea thable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42. with: EN ISO 20345 S3 CI SRC.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, blue.
Safety helmet made out of PE. Has a 6-point polyethylene cradle (53-63cm). Available in: white, yellow, blue, green, red, orange. Su itable for: general industrial applications.
Fireproof battery bag to safely transport, store and charge small batterie of electric devices. If the battery should ignite, the damage will be limited to the bag and the battery. Tested with Li-Ion batteries up to 400W). Big enough for almost any bicycle battery. Dimensions: 215x160x145cm.
Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.
High shoe S3 in waterresistant black full grain leather with uvex waterstop technology for protection against splashing water and 200J synthetic toe cap and steel antiperforation sole. Innovative uvex bionom x design creates a biomechanical symbiosis between the foot, the upper, the sole and the floor. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU (i-PUREnrj) with strong antislip values and very good shockabsorption. Free of phthalates and silicones. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 38-52.
Comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point. Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with quick release. Harness easy to put on. Built-in foot loops to prevent hanging trauma, fall indicator front and back.
Overshoe, Tyvek ®, elastic at ankles, length 40 cm, one size.
Green plastic hearing protector with neck band made of combination of plastic and stainless steel. Allows simultaneous use of helmet s or other head wear. Universal size.
Spill kit universal SKA-ADR-S. Portable universal intervention spill kit. With 25 towels, 4 socks, 1 waste bag, 1 pair of gloves and an instruction sheet.
Hairnet, polypropylene, flap, covers the ears. Available in: White.
Replacement earplugs for X-cap (1015672 en 1032428). Sold in a bag of 5 pairs. Available in: lime yellow.
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Fitted with a breathable GORE-TEX liner. Outsole in VIBRAM rubber, SRC antislip, oil and carburant resistant. Removable, antistatic insole which covers the entire surface of the foot. 100% metalfree. Sizes: 38-47.
ABEK2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Dust mask, class P2, for irritating dust. Mask without nose bridge vut whit seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 10.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve for lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands with closure.
Goat leather gloves of super quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver (super quality) and Driver EC (standard quality).
A simple method for measuring the time-weighted average concentrations of gas- and vapour-phase air contaminants. The monitor must b e attached to the clothing, close to the breathing zone, during the work. The contaminants are absorbed by an active carbon layer. M onitor must be analysed in a laboratory at a later time. Measurement of: organic vapours. Shelf life: 18 months in sealed packaging. Does not produce alarm.
Empty first aid kit box made of impact resistant ABS plastic. Domino(420 x 300 x 150 mm) for maximum 20 people.
Absorption granules that absorb virtually all aqueous and non-aqueous chemicals. Trivorex not only neutralises acids and bases but a lso oxidants, reductants, etc.
Protective lens for the inside of Speedglas welding cassette 9100X. Not separately approved as PPE.
A2P3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65 °C, plus toxi c dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
The choice of professionals: maximum protection for arc welding. Ideal in shipbuilding and construction sectors, folding glass holder size 50x108mm. Weight: 521gr. Easy adjustable headband, perfect comfort, leather chincup available. Supplied with welding glass DIN 10.
Standard casing for hand wheel valves. Not PPE.
Plastic box for moldex mask.
Set female and male coupling CEJN '342', 3/8"BSP. Equipped with screw thread. Combinable with compressed air hoses of 3M and filter unit AirCare of 3M.
Jacket / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / Washable at 95°C / High frequency welded seams / Outside: Fixed hood / Zip closure under flap with press studs / Raglan sleeves / Elasticated wristband / Underarm ventilation / Back length 85 cm (L) / Fabric: FLEXOTHANE® Kleen: / 100% polyamide knitting 6.6with PU coating; ± 170 g / m² Colour: W02 white
Aluminized jacket, the exterior consists of a flexible cloth aluminised, lining is a layer cotton Proban, push-buttons with velcro closure of 5 cm width, ventilation under the arms, high collar in grainleather with velcro closure, 2 covered splits on the sides for better freedom of movement, length 110 cm, length sleeves 80cm. Available in: aluminised soft.
Grey, metallic safety glasses with polycarbonate lenses which protect against dust and impact. Preformed temples for a better adaptation to the face. Adaptable nose support in silicone with antislip properties benefit wearing comfort. Lateral protection in clear polycarbonate and riveted. Matching case also available. Suitable for light or medium mechanical work and laboratory applications.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Normal peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Flexible glove in unthoughened vulcanised rubber. Test voltage 30.000 volt, use voltage 26.500 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. In line with EN 60903 class 0 cat AZC.
The 3M™ V5 Face Shield System is designed for best compability with the 3M™ G3000 and G22 Safety helmets, 3M™ V6 integrated eyewear, 3M™ PELTOR™ Ear muffs and Communication headsets. The V5 Face Shields also provide improved protection against high speed particles, both from the front and the sides.
Transport box for full mask, such as Shogun. Equipped with practical shoulder strap. Ideal for dust-free storage of full face mask and filter, when they are not connected together.
Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.
Double safety line, 1.5 metre length, consisting of kernmantle rope with integrated shock absorber. Safety line tested according to sharp side test and thus extremely reliable for use near sharp edges. Double safety line to allow continuous protection, even when switching between two anchor points. Fitted with one standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
Fall-prevention device, 2,5 metre webbing strap, with integrated shock absorber. Plastic casing. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. With 2 carabiner hooks. Only for vertical use. Weight: 1.27 kg. Max user weight: 140 kg.
Low black safety shoe in water resistant full grain leather. Lining in spandex and pig leather. Strong anti-slip sole in PU / Nitrile with steel leg for optimal foot support. Removable EVA insole. Sizes: 38 - 47.
Reusable cold / hot pack. Helps with sprains, muscle tears, bruises and headaches etc. The cold / hot pack cannot be placed directly on the skin when used due to use. Freezing or burning symptoms (use the supplied Velcro bandage for this).
Low shoe in white synthetic material, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
Low shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-42.
High shoe in waterresistant synthetic textile (100% leatherfree), with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane semi-orthopedic insole with textile layer. Sizes: 36-48.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-42.