BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
P3 filters with high-resistance shell, with bayonet connection for mask Medopair II. Offer excellent protection aginst solid and liquid particles such as dust, fumes, aerosols. In linet with: EN143
P3 RD with actif carbon Elipse replacement filter for usage on Elipse Integra odour masks. Pack of 10 paires..
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
AE1HGP3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C ,sulfur dioxide and hydrogen chloride, mercury and toxic dust, vapour and smoke particles.
The Combined filter SR 599 is intended for use in the SR 500/SR 500 EX fan. The filter is of type A1BE2K1‑Hg-P3 R and provides protection against the following types of gases and vapours: Type A protects against organic gases and vapours, such as solvents, with boiling points > +65 °C. Type B protects against inorganic gases and vapours, such as chlorine, hydrogen sulphide and hydrogen cyanide. Type E protects against acidic gases and vapours, such as sulphur dioxide and hydrogen fluoride. Type K protects against ammonia and certain amines, such as ethylene diamine. Type Hg protects against mercury vapour. Warning. Maximum use time 50 hours. Type P3 R* protects against all types of particulate pollutants, e.g. dust, mist and smoke. *R (Re-useable): The filter is intended to be used for more than a single shift.
Protects against sulphur dioxide, acidic gasses and vapours. For use in combination with a half or full face mask with standard threads. Class 2 gas filter for maximum concentraiton of 0,5%.
Belt for attaching hose to mask. In combination with hose with standard threaded connection, the filter can be worn on the hip to avoid high concentrations at filter input point during certain activities, e.g. opening a vat.
P1 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Plastic ABE2P3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and particulates.
ABEK1P3 filter in plastic housing for 3M Secure Click half face masks. Protects against anorganic and organic gases and vapours with a boiling point > 65°C, sulphur dioxide, acidic gasses and vapours, ammonia, organic ammonia derivates and toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%.
K1 filter in plastic housing for 3M half and full face masks. Protects against ammonia and organic ammonia derivatives. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. concentration of 0 .1%.
Odour filter that removes unpleasant odours. Does not provide protection from gases or vapours, only improves comfort. If gas filter s are already being used, it is unnecessary to use an odour filter. Can be used in combination with the Adflo motor unit. Suitable f or: processes involving chemical risks.
P3 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
Gas filter ABE2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Gas filter ABE1 for use with motorunit SR500 / SR500 EX , protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic, acidic gasses, vapours and ammonium. Per motor unit there are 2 flters needed.
Dust filter protects against all types of particles (highly toxic dust, mist and smoke particles) Can be used in combination with the Sundström motor units SR500/SR500EX/SR700. Cannot be combined with a gas filter.
Combined filter protecting against gases of the ABEK type, dusts, fumes, mists and some warfare agents: Cyanogen Chloride (CK), Formaldehyde (HCHO), Nitrogen Dioxide (NO2), Phosgene (CG), Phosphine (PH3) and Chloropicrin (PS).
Combination filter class 1 for use with Sundström half and full face masks. Provides protection against organic gases and vapors, with boiling point > +65 °C, inorganic gases and vapors, acid gases and vapors such as sulfur dioxide and hydrogen fluoride, ammonia and ammonia vapours, mercury vapors and dust particles, fog and smoke.
Replacement filter for Adflo odour filter. Odour filter that removes unpleasant odours. Does not provide protection from gases or va pours, only improves comfort. If gas filters are already being used, it is unnecessary to use an odour filter. Can be used in combin ation with Adflo odour filter.
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist, ozon and smoke particles.
P3 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.
P filter for motor unit Versaflo. Protects against highly toxic dust ,mist and smoke particles. Saturation of the filter is only detectable by an increase in (inhaling) resistance, the motor unit will alarm.
Pac of 10 pre filters for motorunit PX5.
A2P3 filter in plastic housing for 3M Secure Click half face masks. Protects against organic gases and vapours and toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%.
Gas filter ABE1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Gas filter A2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C. To use with half and full face Sundstrom masks.
Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only.
Protects against organic and inorganic gases and vapours sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives.
For use together with Sundström compressed air filtration system. Type A protects against oils, organic gases and vapours, such as solvents, with boiling points > +65 °C. Type P3 protects against all types of particulate pollutants, e.g. dust, mist and smoke.
Protects against organic gases and vapours with a boiling point over 65 °C. For use in combination with full or half face masks with standard threads. . Class 2 gas filter: for max. concentration of 0.5 %.
Dust filter holder for attachment of dust filters secure click series D7900 to 3M secure click gas filters. No PPE.
P2 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.
Gas filter A1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C. Can be used in combination with the Sundström half and full face masks.
P2 filters with high-resistance shell, with bayonet connection for mask Medopair II. Offer excellent protection aginst solid and liquid particles such as dust, fumes, aerosols. In linet with: EN143
P2 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
A2 filter in plastic housing for 3M half face masks Secure Click. Protects against organic gases and vapours with a boiling point >65 °C. Dust filters series 7900 can be mounted on gas filter if dust filter holder D701 is used. Class 2 gas filter: for max. concentration of 0.5%.
Gas filter AX protects against orgnaic gases and vapours such as solvents with a boiling point lower than +65°C. To use with half and full face Sundstrom masks.
Gas filter k1 protects against ammonia, and certain amines, such as ethylen diamine. To use with half and full face Sundstrom masks.
Gas filter k2 protects against ammonia, and certain amines, such as ethylen diamine. To use with half and full face Sundstrom masks.
Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2 and toxic particuls and vapors. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
Protects against organic gases and vapors with a boiling point >65°C, inorganic gases and vapours, toxic dust, mist and smoke particles. Can be combined with half or full mask with standard screw thread. Class 2 filter: up to a maximum concentration of 0.5%.
