BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Rechargeable battery for Clean Air motor unit for use with the RJS suit.
Air regulator suitable for working in ATEX environments, mounted on a belt and equipped with flow meter and warning whistle. Regulator provides continuous air flow and serves as a connection between the Sundström air hoods and the compressed air hose.
Protects against organic and inorganic gases and vapours sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives.
Assisted fresh air system can be used by 2 operators simultaneously. consisting of an adjustable harness with attachment for the breathing hose (max 20m for 2 operators and 50m for 1 operator) on the shoulder. Easy in use. Comes in a handy box. Mask (1023883) sold separately.
To be installed on Sundström filter system.
Protects against organic gases and vapours with a boiling point over 65 °C. For use in combination with full or half face masks with standard threads. . Class 2 gas filter: for max. concentration of 0.5 %.
Motor unit can only be combined with dust filters SR510 or SR710 (P3 filters) and air hoods and half and full face masks from Sundström. Flow rate: 175 or 225 L/min. Equipped with visual and audible alarm in case of dust filter saturation or low battery. Includes: motor unit, belt, charger, battery,2 filteradapters, 2x P3 filters, 2 pre-filter holders, 10 pre-filters, flow meter. Battery charging time: 0-80% capacity in 30min. battery autonomy depending on filter and set air flow 4-7 hours. NPF: depending on the cap used.
Standard Lithium-Ion battery for SR700 motor unit, 14,8V 2,25Ah. Battery charging time: 0-80% capacity in 30min, battery autonomy d epending on filter and set air flow: 4-7h.
EX battery charger for the atex battery SR502 (1061168) to be used with motor unit SR 500 EX.
AB2P3 screw filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65°C, inorganic gases and vapours, toxic dust, mist and smoke particles. To be combined with half or full mask with standard thread. Class 2 filter: up to max concentration of 0.5 %. Weight: 345 gr.
Visor for air hood Simplair.
Oxygen producing self-rescue set with mouthpiece and nose bridge, for very hazardous circumstances and/or places where a lack of oxy gen may develop. Stored in a hermetically sealed, stainless steel carrying box with belt loops, can be used with carrying harness SS R30/100 B for carrying unit on the body, either opened or unopened. Works using an oxygen generating KO2 cell that can be replaced o nce it is used. KO2 cell is activated by first exhalation, responds to moisture and CO2 in exhaled air. Very maintenance-friendly, o nly requires annual test of seal. Working time: at least 30 minutes at consumption of 30 l/min. (escape), 100 minutes at consumption of 10 l/min. (rest). Shelf life: ten years. Weight: 2.1 kg.
Trainer self-rescue set SSR 30/100 and SSR30/100 B.
Black compressed air hose, 10 m, rubber. Extremely robust hose for extreme conditions, hose does not collapse even if a forklift truck is driven over it. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Fitted with male and female RECTUS 96 safety quick-couplings.
Vaporiser to vaporise liquid in hood of fit test FT10.
Communication adaptor for 3S-P mask.
Adapter for mounting communication on Eltra Elite mask.
Bag to provide victim with air. Compressed air bottle of 6-6.8 or 9L to be ordered separately. Connection for mask with regulator (to be ordered separately) for victim. Easy-to-read pressure gauge to indicate level of the remaining air. With extra compartment for accessories. Dimensions: H: 29cm, L: 75cm, W: 17cm. Weight with Single Laine <(><<)>(><(><<)><(> <<)>)> 6 kg.
T-Airweld®Combi 500 with ADF, aiduct and adjustable head harness. Unique low flow indicator.PE breathing hose to order separately (1035014) For grinding/welding.Combined with T-airline regulator kit. To be used with motor unit. In line with EN14594:2005 Class 3B
T-AIRWELD®820 with large ADF, airduct and ajustable head harness. Unique low flow indicator .PE breathing hose to order separately (1035014). For grinding/welding. Combinde with T-airline regulator kit. To be used with motor unit. In line with EN 14594:2005 Class 3B
EVOH film barrier hood with exalation valve, PETG visor, air duct and adjustable head harness. Unique low flow indicator. For high hazard applications. Combined with T-airline regulator kit. To be used with motor unit. In line with EN 12941
HD/PE barrier film laminate hood with exhalation valve, PETG visor, air duct and adjustable head harnes. Unique flow indicator. For high hazard applications combined wit T-airline regulator kit. To be used with motor unit.
T-Airweld®Combi 500 with ADF, aiduct and adjustable head harness. Unique low flow indicator.PE breathing hose. For grinding/welding.Combined with T-airline regulator kit. To be uses with compressed air systems.NPF 200 In line with EN14594:2005 Class 3B
T-AIRWELD®820 with large ADF, airduct and ajustable head harness. Unique low flow indicator .PE breathing hose. For grinding/welding. Combinde with T-airline regulator kit. To be used with compressed air systems.NPF200 In line with EN 14594:2005 Class 3B
T-Airvisor® Combi with safety helmet (EN 397), CP visor, airduct and adjustable head harness. Unique low flow indicator. PE breathing hose. For grinding/paintsprayin. Combined with T-airline regulator kit. To be used with compressed air systems.NPF 200.
For T-AirWeld 820 (T-Airline)
For T-Airweld 500 (T-Airline)
Face Seal T-AirVisor (T-AirLine), elastic cotton on PVC frame.
Adjustable head harness with contoured air duct, aiflow indicator and sweatband for T-AirVisor and T-AirWeld headtops.
Dust filter holder for attachment of dust filters secure click series D7900 to 3M secure click gas filters. No PPE.
P2 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.
Replacement neoprene hood T-airline without neck seal. (for airhood 1055212)
Replacement helmet with airduct and airduct indicator.
P2 filters with high-resistance shell, with bayonet connection for mask Medopair II. Offer excellent protection aginst solid and liquid particles such as dust, fumes, aerosols. In linet with: EN143
Charging station for 1 battery with power.
Standard battery for PX5. Usage duration depends on filters used. Charging time: 5h.
T200 hood with face seal, air duct and head harness assembly, breathing tube. To be combined with the PX5 motor unit.
Airhoud T200 complete with internal facial joint, combination of air conduct and head harness and breathing hose. To use with motor unit PX5.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with RPB PX5 motor unit or on compressed air line. For heavy applications. Respiration, face and head protection in one. Includes: air hose with aluminated cover, aluminated shoulder cape, and aluminated top and back cover.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, cover for gas filter, flow meter, battery and charger and a pack of prefilters. NPF: Depends on hood used.
Filter cover for gas filter in combination with motor unit PX5.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters and designed for welding applications. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, spark arrestor, flow meter, battery and charger, P filter and pack of prefilters. NPF: Depends on hood used.
Welding air hood from the RPB series consisting of welding hood with folding screen, air hose and FR shoulder cape and automatic welding filter. For connection to the motor unit PX5.
P2 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
A2 filter in plastic housing for 3M half face masks Secure Click. Protects against organic gases and vapours with a boiling point >65 °C. Dust filters series 7900 can be mounted on gas filter if dust filter holder D701 is used. Class 2 gas filter: for max. concentration of 0.5%.
Gas filter k1 protects against ammonia, and certain amines, such as ethylen diamine. To use with half and full face Sundstrom masks.
Gas filter k2 protects against ammonia, and certain amines, such as ethylen diamine. To use with half and full face Sundstrom masks.
Breathing hose tested and approved together with remote filter holder SR905, fan unit SR500/SR700, intended for use with half face mask SR900.
Short hose for motor unit PX5, in combination with the decontaminable harness (1053172).
RPB Astro - 02-813 Nylon Cape, NV2030 Low Flow Indicator, NV2021B Breathing Tube, 03-102 Constant Flow Valve
Chemical resistant Neoprene air cap with integrated safety helmet, including belt with control valve for connection to compressed air network.
Complete kit contains, SR 500 fan unit, SR602 hood, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Complete anti-static air hose with couplings for use with SR500, SR500 EX and SR700 motor units, and full mask SR200.
Stand-alone air purifier that recirculates and cleans the air in the room, specially designed for large spaces. Version with 4 wheels, capacity of 2500m³/hour. Air outlet on 4 sides.
Powerful and unique air purifier that easily and effectively removes extreme dust concentrations from up to 5000m³ of air per hour. Ideal for applications in steel processing, paper processing, factory halls, welding workshops, ... Removes both fine dust and coarse dust and ultra-fine dust from the air, resulting in a healthy and comfortable working environment and lower cleaning costs.
Air purifier that recirculates and cleans the air in a room up to 650m³. Removes unwanted odors and gases as well as unwanted particles. Has 4 wheels, making it easy to move. Extremely effective for removing all microspherical particles between 0.3 and 10 microns. The modular design allows you to adapt the capacity to your needs.
Spectacle kit to support pescriiption lenses, the position of the holder can be adjusted vertically as well as in depth.
