BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Face seal for 9100 AIR hoods.
P3 filter with thread connection EN148-1 in ABS housing.
Put togehter with pre filter SR221 on gas, particle, or combined filter. Use also for fit test.
P2 dust filter from 3M for direct connection to 3M half and full face masks. Protects against harmful dust, mist and smoke particles .
Foldable mask, class P1, for irritating dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fit ted with non-adjustable, elastic headbands. Masks packaged separately. NPF: 4.
Seal as protection for the head, neck and shoulders as spare spart of hoods M-106, M-107,M-206,M-207, M-306, M-307. No PPE.
Braces as spare spart for motor unit Versaflo. No PPE.
Coupling to be installed on leather belt. Fitted with male and female quick-couplings and CEJN closure.
Cover for TR-600 can be combined with filter TR-6310E.
Male rectus threaded coupling for equipping V-500, V-100 and V-200 with male coupling.
Comfortable air hood made of neoprene with a panoramic PVC visor. The required air flow from the compressed air line is between 220 and 280 l/m. An audible alarm signal warns of a loss of pressure. The hood is supported on the shoulders so the head can move freely . Available in: yellow. Sizes: universal.
Disinfectant fluid for responsible cleaning of rubber masks, medical equipment and plastic or metal parts. Disinfect for 15 minutes with a 1% solution of this product. Desinfecto kills bacteria and mildew, deactivates viruses, is non-flammable and biodegradable. B ottle containing 1 litres, pH value 6.7.
Soap- and alkaline-free liquid for responsible cleaning of rubber masks, medical equipment, parts of compressed air equipment, prote ctive clothing, etc. Clean is a slightly viscous mixture of anionic surfactants, corrosion protectors, inhibitors, additives and fix atives, water and NaOH, with a pH value of 7. Completely biodegradable, non-flammable and does not irritate skin or mucous membranes . Use a 0.5-1% or 1%-3% solution, depending on the materials to be cleaned. For manual cleaning.
Replacement hood for hood S-657.
Protective cover disposable for air tube in PU convenient for air caps.
Lightweight disposable breathing hood with hood made of PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar. Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Model on base. Can be ordered with 3-way output 1002713 and 1014794 couplers. For use with compressed air hoses with maximum lenght of 10m.
Air hood in the form of safety hood with PC visor. Air channel leads to the visor to prevent it from fogging. Can be used in combination with the Sundstörm motorunits SR500/SR700. Visor easy to fold up and air hose is replaceble. For work with a risk of mechanical impact. Weight: 700 g. NPF: 500.
Compressed air device that supplies environmentally-independent air and overpressure to the full-face mask. Apparatus for work situations or interventions. Ergonomic basic backplate with shoulder and hip straps with shock absorbing lining and plastic buckles. Includes pressure reducer, pressure gauge, warning whistle to indicate low air, and cylinder connection. Thanks to unique hose technology, 3 functions are combined in 1 hose: pressure gauge, 2 connectors for lung demande valve and whistle signal (single line). To be combined with steel or composite air cylinder 6L(6.8L)/300BAR, regulator M1 and corresponding 3S Maxx or G1 Maxx masks not included. Working time: approx. 45 minutes. NPF: 50 ,000.
Particle-filtering folding mask with exhalation valve, protection level FFP3. Ergonomically adapted for large face shapes, innovative design with optimized shape, soft material edges for high wearing comfort. Continuous adjustable head band for a comfortable and secure fit. Inidvidually packed. Flexible and adjustable nose clip, compatible with Uvex eyewaer. Soft sealing lip (nose area) guarantees a secure comfortable sealed position of the mask. Activated carbon filter for odors, gases, and vapors below limit value.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, and particulates.
Disposable protective cover against contamination by splashes and spray mist, for Versaflo TR-600 and TR-800.
P1 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M h alf and full face masks when used with filter holder 603 and dust filter holder 501. Protects against irritating dust, mist and smok e particles.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. Protection against organic vapour s < MAC value thanks to active carbon layer. NPF: 4.
Escape hood with COP2 filter, provides protection against smoke from fire, among other things. Easy to put on, even for people who wear glasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in sealed two-part wall box. Dimensions: h x w x d 28.5 x 15.5 x 12.5. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
disposable S-920 visor protectors (tear offs) for breathing hood S-133, S-333, S-433 and S-533. Prevents wear and damage of the visor.
Lightweight breathing hood made of WEB 24 with PE visor. Hood with neck and shoulder protection. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. With internal knit collar under the hood for better sealing. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
Leather belt to link the connection hose from the demand valve to the compressed air hose coming from the filter system in order to prevent the mask from being pulled off. Couplers to be ordered separately.
external high resistent collar as spare spart of hoods M-406, M-407. No PPE.
Fire resistant protection seal for breathing tubes BT. No PPE.
Easy lock® Pre-assembled filters EN4387:2004 + A1:2008 Pre-assembled A2P3 R filter which uses Easy Lock® system to connect to face-piece with 1 click, without adapter. All Moldex products and packaging are 100% PVC-free.
Full face mask in TPE with visor in polycarbonate anti fog, with filter connection EN148.NPF depends on used filter, 2000 with motorunit T-Air. When used with motorunit, the hose 1046652 needs to be ordered separately In line with EN136-2; EN12942
Radiant heat cover to cover head and shoulders for airhoods M-400. No PPE.
P3 RD with actif carbon Elipse replacement filter for usage on Elipse Integra odour masks. Pack of 10 paires..
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6100FC.
Shot blasting helmet made of polyester fibreglass with wear resistant rubber outer layer that also reduces the impact noise from the reflected shot blasting agent. The wire mesh in front of the visor and the replaceable lenses protect the visor. The Commander helm et provides a concentrated field of vision. Washable cotton neck seal provides additional comfort and safety. Cape made of bisonyl. For connection to compressed air line. Usable for chemical applications due to liquid-proof seams. Includes airflow indicator. Inclu des belt, regulator and hose. Weight: 2500g. Required pressure: between 4 and 10 bar. NPF: 1000.
Dust mask, class P2, for harmful dust and ozon. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against ozon 10 x MAC value thanks to active carbon layer. NPF: 10.
Screw filter A2P3 in plastic housing with standard thread connection DIN EN148-1. Suitable for protection against organic gases and vapours, such as solvents with a boiling point higher than 65°C, solid and liquid particles of toxic substances, radioactive substances and micro-organisms such as bacteria and viruses. These RSG filters are designed to provide exceptionally low breathing resistance and high comfort for extended use. The standard threaded connection ensures that they are also compatible with RSG's T-air motor unit and all masks with a standard threaded connection. Compliant: EN14387
Synthetic wipes, soaked in disinfectant liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
The SR 200 full face mask is made of silicone and is produced in one size that will fit most face sizes. The mask is equipped with three inhalation valves and two exhalation valves, and the breathing resistance is therefore very low. The exhalation valve covers with baffles effectively protect the valves and membranes against dust and paint mist. The design and location of the exhalation valves improve the scope available for communicating. The material and pigments of the mask body are FDA- and BGA approved for exposure to provisions, which minimizes the risk of contact allergies. The easily adjustable elastic head harness of the mask is secured to the visor frame and to the exhalation valves which, together with a large crown plate, contributes towards a comfortable and secure fit. The spherical visor of the mask is made of scratch-resistant polycarbonate, which provides a large field of vision. The mask can be used either as a filtering device in combination with filters from the Sundström range of filters, or as breathing apparatus with a continuous air flow together with the SR 307 compressed air attachment. The SR 200 can also be used as head top together with th e Sundström fan unit SR 500 or SR 700. Holder for pre-filter is included. The SR 200 full face masks together with the SR 500 EX fan are approved for use in a potentially explosive atmosphere. Best stored in box SR 344 alternatively storage case SR 339-1 or SR 339-2.
P3 filters with high-resistance shell, with bayonet connection for mask Medopair II. Offer excellent protection aginst solid and liquid particles such as dust, fumes, aerosols. In linet with: EN143
Comfortable half mask in TPE with replaceable ABEK1P3filters. For protection against most organic and arorganic gases and vapours, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivates, toxic dust, vapour and smoke particles metal fumes, mists and micro-organisms. Sizes: S/M and M/L.
Harness to carry fan units SR500/SR700 on the back. No PPE.
Output for 3 persons / compressed air hoses to be installed on Aircare filter system.
Storage or transport bag for adflo motor unit. Only for motor unit, not suitable for storing helmet. No PPE.
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
Bottle for long-lasting, effective anti-fogging treatment and intensive anti-static treatment of lenses in masks, visors, glasses, etc.
Protective foil for visor of full face mask 3S. Protects the visor against scratches and liquids.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, includes a car ry strap for hanging the mask around the neck. Features click connection for demand valve with quick-coupling Automaxx-AS.
Belt, decontaminable, as spare spart for motor unit Versaflo. No PPE.
Compressed air bottle in composite 6.8l/300bar with tap. Content 2040L breathing air. Can be mounted on all compressed air, except the BD mini. Can also be mounted on small compressed air carriage. Weight: 4.2kg. Supplied unfilled and with test certificate. Recertification required every five years. Service life 15 years. Equipped with outflow safeguard.
P filter for TR-600/TR-800 motor unit. Protects against highly toxic dust, mist, smoke particles and irritating odours. Clogging of filter only be detected through an increase in the (breathing) resistance, motor unit will then sound an alarm.
Intrinsically safe (Ex-proof) battery for SR 500 EX motor unit.
The SR 100 half mask is made of silicone in three sizes, i.e. S/M, M/L and L/XL. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist. The material and pigment of the mask body are approved by FDA and BGA for foods, which minimizes the risk of contact allergies. The easily adjustable elastic head harness straps of the mask are designed as a V-shaped loop and have a large dished crown plate, which contributes towards a comfortable and safe fit. The mask is used either as a filtering device in combination with filters from the Sundström range, or in combination with the SR 307 compressed air attachment which then serves as a breathing apparatus with continuous flow for connection to a compressed air supply. A pre-filter holder is supplied. Best stored in box SR 230 or storage case SR 339. Sizes: S/M, M/L, L/XL.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEK2P3 filter for protection agiainst dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia ant its derivates, as well as dusts, fumes and mists.
Self-rescuer, compact, lightweight and ergonomic. Can be worn on the body or mounted on the wall in a waterproof box. Is used to escape from a lack of oxygen, but also against toxic gases and particles and provides the user with oxygen for 15 minutes. Operation based on a small compressed air bottle which adds 02 to expired air. Delivery in orange storage box. Belt sold seperately as an accessory. 15-year life cycle.
Protection sleeve breathing hose Adflo. No PPE.
Dust mask, class P1, for irritating dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the mask always retains its shape, even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhal ation resistance and low levels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands. NPF: 4.
Air heater with neoprene cover on belt for use in combination with 3M airhoods with bayonet coupling. With regulator to adjust the airflow and temperature in the air hood. Can heat air a maximum of 28 °C. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose in rubber of PU to hood not included. All usable buttons are made blue. Inlet pressure: 4 - 8 bar. Minimum airflow 170 l/min, max. 500 l/min. NPF: 50 with M-100 and 200 with all other hoods.
AE1HGP3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C ,sulfur dioxide and hydrogen chloride, mercury and toxic dust, vapour and smoke particles.
Replacement filters for flowstream air regulator. AK filter that removes unpleasant odours and taste from compressed air. Suitable f or: processes involving chemical risks.
Dust and spatter-proof wall storage box in impact resistant plastic for storage of half-masks in industrial workplaces. Blue model, with pictogram, includes wall mounting hardware. Dimensions: 236 x 225 x 125 mm.
