BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
P2 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M half and full face masks when used with filter holder 603 and dust filter holder 501. Protects against harmful dust, mist and smoke particles.
Dust mask, class P3, for toxic dust. Mask with nose bridge and seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the ma sk. Mask has rigid cup form for better retention of the shape of the mask during use. Fitted with non-adjustable, elastic headbands. NPF: 50.
Motor unit Versaflo TR-302E+ can be combined with hoods of M and S series. Includes filter cover and air flow indicator. Can be combined with filters TR-3710, TR-3800, TR-3820 and BT-hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Battery, charger, air hose belt and filters can be ordered separately. Flow: 190L / min. Weight: 1095Gr with filter, belt, battery. NPF: depending on chosen hood.
Memory foam, cylinder shaped earplugs made of foamed polymer. This material responds to body heat and adapts perfectly to the shape of the ear canal. Adapt perfectly to the shape of the ear. Fitted with blue, vinyl cord that prevents loss. 100% recyclable. Package d per pair in a box.
Protect your hearing and listen to the radio at the same time. Excellent FM-reception. Extra wide, padded headband that divides the weight and 2- points suspension with low pressure for long lasting wearing comfort. Soft ear cushions filled with foam and fluids. Battery life: around 40 hours. Audio input for mobile phones, MP3 players and communication transmitters£. Weight: 350g.
High capacity battery as spare spart for motor unit Versaflo. 10 to 12 hours with new filter. No PPE.
Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and suspension with wheel adjustment. Helmet with slot for P3E or P3K adapter. Tested: molten splash metal (MM) and low temperature (-30°C).
3M ™ Solus ™ 2000 with In/Out PC lens and adjustable ear branches. The glasses are available with a Scotchguard coating (anti-scratch and anti-fog). Marking: 5-1.7 1 FT KN.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 4.
Comfort facial seal as spare spart of hoods M-106, M-107,M-206, M-207, M-306, M-307. No PPE.
Easy-to-clean belt for TR-600.
P filter for TR-600 motor unit. Protects against highly toxic dust, mist and smoke particulates. Clogging of the filter can only be detected through an increase of the (breathing) resistance, motor unit will then sound an alarm.
1 day on-site training fall protection by 3M. Content and location according to your needs.
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Has different diopters (+1,5/+2/+2,5). This glasses have very good colour recognition, a large field of view and brings resistance to UV-rays.
Charging station for 1 battery with power.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter! Suitable fo r: processes involving chemical risks.
Earmuff for helmet X3 with double-cast (TPU/ABS) housing with details in bright colours for increased visibility. 'Spacers': an extra seal ring which reduces resonance. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 32dB.
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Haevy duty backpack to carry the motor unit Adflo and Versaflo R-300, TR-600 and TR-800 comfortlaby on the back.
Air regulator in Zytel (glass fibre reinforced polyamide) on belt for use in combination with 3M air hoods with bayonet coupling.Fitted with pressure reducer that eliminates any pressure fluctuations from the compressed air line, which provides improved comfort because the airflow remains constant. With regulator to adjust the air flow in the airhood. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 3.5 - 8 bar. NPF: 50 with M-100 and 200 with all other compliant hoods. Minimum airflow 170 l/min, max. 305 l/min.
Protective foil for visor of 3M full face masks 6700S, 6800S and 6900S. Protects the visor against scratches and liquids. Suitable f or: processes involving chemical risks.
The PROTAC amplifies all the ambient noise to a level that allows you to hear it better. It allows you to hear better and protects you during those moments when protection is necessary. Ideal for automatically blocking peak noise above 82 dB. Allows you to continue communicating normally. Settings are stored when removed. Automatic shut-down in the event of non-activity for 2 hours.
Adapter for TR-600 to be combined with backpack BPK-01.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
AXP3 filter in plastic housing for 3M full face masks. Protects against organic gases and vapours with a boiling point <65 °C, plus toxic dust, vapour and smoke particles. Only for use in combination with full face mask, and filter is for one-time use only. Suitab le for: processes involving chemical risks.
Charger as accessory for motor unit Versaflo. No PPE.
Spark protector to protect filters against sparks.
The 3M™ Solus™ 1000 Series Kit includes a pair of Green and Black Solus safety glasses featuring clear lenses with Scotchgard™ Anti-fog coating, an optional elastic strap, and a removable foam gasket. 3M™ Scotchgard™ Anti-Fog Technology brings higher anti-fog performance* to safety eyewear, helping workers see more clearly to complete on-the-job tasks. The elastic strap and removable foam gasket are optional accessories that may be attached or removed from the eyewear depending on the preferences of the person wearing the glasses. The strap fits comfortably around the backside of the head to help keep the glasses securely in place when being worn. The removable foam gasket is also included to help reduce eye exposure. Small vents in the foam gasket help reduce fogging. Other features include removable padded temples and a soft nose bridge for added comfort.
ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE
Very light safety spectacles with polycarbonate lenses. 3M ™ Pressure Diffusion Temple Technology that helps distribute pressure across the ears to improve frame comfort for a firm and comfortable fit. The 3M ™ Scotchgard ™ Anti-Fog Coating offers superior anti-fog and scratch-resistant properties.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Earmuffs X5 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New damping pads increased damping, and 'spacers': an extra seal ring that reduces resonance. Adjusted easily using 'grip areas' on the top and bottom, durable, ergonomic and very light in relation to a noise-reduction. Can be combined with 3M respiratory and eye protection. SNR: 37dB.
High capacity battery for TR-600. Weight: 620 grams. Usage duration depends on the filters used.
Standard battery for TR-600. Weight 450 grams. Usage duration depends on filters used.
Sweatband in leather. Suitable for cradles of Peltor helmets. Not separately tested as PPE.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Spark catcher as accessory for motor unit Versaflo. No PPE.
Clear faceshield 5F-11 provides increased protection against high speed particles (120m/s).Compatible with the 3M™ V5 Face Shield System for mounting on a 3M™ G3000, G500 or G22 Series Safety Helmet. In accordance with: EN 166
Dispenser for EAR earplugs (excluded) for one-time use (refill: 1001007, 1013077). Simple to operate with a simple twisting action. Made of 100% recyclable material.
Cover for TR-600 and TR-800 to be combined with filter TR-6110E and TR-6130E.
Safety helmet made of ABS, fitted with a 4-point textile suspension with slip adjustment and leather sweatband. Vented version. Includes European 30mm accessory slot for the V5C face screen and H31 ear protection. This helmet contains the forestry quality label KWF (printed on the helmet). Sizes: 53-62cm.
Lightweight air hood with inegrated bumpcap and fire retardant face seal, for work where there are sparkels or hot particles. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50 and compressed air, with Jupiter, NPF: 500 with TR-300, TR-600 and TR-800.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against organic vapours < MAC value thanks to active carbon layer. NPF: 4.
Hose of strong neoprene that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. Length: 840mm. Not for Atex environments.
Baseball bumpcap with reduced peak (25mm) and ABS protection. Sizes: 52-65cm.
Hygiene set for Optime III.
Foldable mask, class P2, for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non- adjustable, elastic headbands. Masks packaged separately. NPF: 10.
Dust mask, class P2, for harmful dust, welding fumes, ozone and'unpleasant odours. Mask with nose bridge and seal along the entire e dge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistanc e and low levels of CO2 and moisture in the mask. Mask has rigid cup form for better retention of the shape of the mask. Fitted with adjustable, elastic headbands. Protection against ozone up to 10x MAC value. NPF: 10.
Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with full peak, leather sweatband and a G2D suspension with slip adjustment (54-62cm). Vented helmet with slot for P3E adapter. Tested: lateral deformation (LD), molten splash metal (MM) and low temperature (-30°C).
Goggle with large field of vision, vented indirectly. UV-resistant polycarbonate clear lens with antiscratch and antifog coating. Large adjustable headband with rotating anchor point, can be worn with most corrective glasses.
Standard fabric belt as spare spart for motor unit Versaflo. No PPE.
P filter for motor unit Versaflo. Protects against highly toxic dust, mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. Odors only if concentration below the MAC value. NO protection against gases, only comfort.
Goggle with large field of vision, vented indirectly. UV-resistant acetate clear lens with antiscratch and antifog coating. Large adjustable headband with rotating anchor point, can be worn with most corrective glasses.
3M™ PELTOR™ G500 Forestry combination with Optime I earmuff and vizor 5C. A flexible and comfortable solution for face and heariong protection in forestry. Sizes: 54-62cm. Convenient for: forestry. In accordance with: EN 397/EN 166/EN 1731.
Charger for 4 batteries.
Kit of level dependent earplugs. They help protect your hearing, and can help improve situational awareness and communications in challenging environments. Integrated with state-of-the-art level-dependent technology, this earplug helps provide hearing protection in noise and situational awareness in quiet environments. SNR: 28dB.
Light, flexible banded earplugs made of a single piece, easy to wear around the neck. Caboflex is made of dimensionally stable plast ic and is perfectly washable and reusable. Excellent protection against universal noise.
Filter holder for use in combination with dust filter holder 501 for direct connection of dust filters 5911, 5925 and 5935 to 3M hal f and full face masks.
Air hood with safety helmet PC/polyester with hinged visor and fire resisteant Nomex full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 200 with compressed air, 500 with Jupiter or Versaflo.
3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with an anti-scratch and anti-fog coating. Prescription lenses in different diopters (+1,5/+2/+2,5). Marking: 2C-1.2 1 FT.
Dust mask, class P2, for harmful dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and re duce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 10.
Unisex spectacles in leightweight blank polycarbonate. Superior field of vision and flexible temples for an easy combination with ear and face protection.
Green plastic hearing protector with neck band made of combination of plastic and stainless steel. Allows simultaneous use of helmet s or other head wear. Universal size.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. NPF: 4.
Dust mask, class P2, for harmful dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the sh ape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moi sture in the mask. Fitted with non-adjustable, elastic headbands. Protection against acidic gases < MAC value thanks to active carbo n layer. NPF: 10.
A simple method for measuring the time-weighted average concentrations of gas- and vapour-phase air contaminants. The monitor must b e attached to the clothing, close to the breathing zone, during the work. The contaminants are absorbed by an active carbon layer. M onitor must be analysed in a laboratory at a later time. Measurement of: organic vapours. Shelf life: 18 months in sealed packaging. Does not produce alarm.
Foldable mask, class P2, for harmful dust bulk packing. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non- adjustable, elastic headbands. NPF: 10.
Foldable mask, class P1, for irritating dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fit ted with non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 4.
Set female and male coupling CEJN '342', 3/8"BSP. Equipped with screw thread. Combinable with compressed air hoses of 3M and filter unit AirCare of 3M.