BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
external high resistent collar as spare spart of hoods M-406, M-407. No PPE.
Fire resistant protection seal for breathing tubes BT. No PPE.
Disposable Earplugs Contours, in Station dispending system large SNR 35 dB
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 3: operating voltage 26,500V, test voltage 30,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-11.
Easy lock® Pre-assembled filters EN4387:2004 + A1:2008 Pre-assembled A2P3 R filter which uses Easy Lock® system to connect to face-piece with 1 click, without adapter. All Moldex products and packaging are 100% PVC-free.
Spray for the cleaning and rinsing dust and dirt from eyes and wounds. The spray provides a gentle stream of moisture and has a total rinsing time of 5 minutes. The spray can be used several times and is sterile to the last drop. Contains 150ml sterile saline solution 0.9%NaCl. Environmentally friendly propellant. Fits in the first-aid station.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7 kg.
Hygiene set for Peltor X2 earmuff.
Fixed anchor point for 1 person. Mounting possible in wall, floor and ceiling. Anchoring D-ring: 12 mm attachment. Can be loaded in 3 directions. During installation, this must be tested at 6kN, this can be done by our fixed fall protection team. Contact us for a tailor-made offer. According to EN795 A.
Refillable panel with first aid material for minor accidents. Clearly organised, with instructions. Content: plasters, disinfectant wipes, protection kit, bandages to stop bleeding. Dimensions: 56 x 29 x 12 cm.
Very light sportive low shoe in microporous washable leather and lining in mesh nylon for more comfort. Outsole in very light material EVA, SRA anti-slip. Sizes: 40-46.
50x blue rolled standard fingertips - latex-free - powdered
Hand held gas horn, snap-on type, complete with aluminium bottle Environmentally safe non-inflammable gas (HFO 1234ze) 200 ml. In accordance with European Directive No.517 / 2014. The color of the bottle may be different
Self-adhesive waterproof high-visibility tag with personal info. Statement: In Case or Emergency. You stick this ticket on your helmet after you have entered all of your important personal information. This would include your name, address, companies who should be contacted in the event of an accident. It could also include any allergies, diseases such as diabetes etc. In short, anything that could be of interest to the first responders in order to identify you.
3-layer softshell: polyester fabric + breathable FR PU + inherent FR Fleece ; ± 365 g/m², Softshell ARC protection Class 1 Conform to new FR standard EN ISO 11612, High performance lightweight fabric, windproof, highly breathable, Waterrepellent outer fabric, Comfortable, Supple, Good cold protection, Stitched seams Straight collar, Zip closure under flap with touch <(>&<)> close fastening, 1 inset chestpocket with zip closure, 2 inset pockets, 1 loop for badge, Round inset sleeves, Sleeve narrowing by touch and close fastening, Back length 75 cm (L), 1 inside pocket.
Pack of sterile gauze compresses with dimensions 10X10cm. Air-permeable, soft non-woven material, absorbent, suitable for many wounds and can also be used to clean wounds.
The 3M™ Goggle Gear, 500-Series is a low-profile design with an adjustable strap and indirect ventilation. These splash goggles with 3M™ Scotchgard™ Anti-Fog Coating help keep lenses clear in, steamy and wet environments.
Can of styptic spray 50 ml.
Red life-jacket (automatic inflation) with 3D collar and soft outer cover. The collar is held on the collar band on the back for extra comfort at the neck. The jacket is extremely well finished with piping. The jacket has a minimum of buoyancy of 165N. Available in different versions, including automatic or manual, and with or without a harness. Includes standard leg strap.
Kit with 10 ABS holders in white and red letters. 20 cards in polypropylene for scafftag inspection. 1 permanent marker. All marking in DUTCH.
The 3M™ DBI-SALA® Utility Belt XL/3XL (waist size 40''-54'') is compatible with all 3M™ DBI-SALA® belt holsters and tool pouches. Padding inside two layers of Cordura provide for durability and comfort. No PPE.
Seamless lined glove with foam latex coating on the full glove and extra latex on the palm. Extremely good grip and abrasion resistance. Carrier in nylon/polyester. Sizes: 6(S) -10 (XXL).
Dust mask, class P2, for harmful dust and ozon. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against ozon 10 x MAC value thanks to active carbon layer. NPF: 10.
Red backpack in Plan design Robust carrying material on both sides with reflective strips. Equipped with ergonomic handles and wide carry-straps for improved comfort on the back and shoulders. Plan design (extra strong, waterproof, anti-dirt) Dimensions: 36x47x26cm Weight 3kg - Volume 23L. Empty backpack.
Kernmantle rope 10m diameter 10.5mm. For individual use or in combination with rope clamp.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length: 0.6 metres. Anchor point for protection of one person.
Screw filter A2P3 in plastic housing with standard thread connection DIN EN148-1. Suitable for protection against organic gases and vapours, such as solvents with a boiling point higher than 65°C, solid and liquid particles of toxic substances, radioactive substances and micro-organisms such as bacteria and viruses. These RSG filters are designed to provide exceptionally low breathing resistance and high comfort for extended use. The standard threaded connection ensures that they are also compatible with RSG's T-air motor unit and all masks with a standard threaded connection. Compliant: EN14387
Raincoat, 50% polyamide, 50% polyurethane, 170gr/m², micorflex, high frequency welded seams, fixed hood with drawstring, zip under straw flap with press stud fastening, adjustable press stud fastening sleeves, 2 straight pockets, 3M reflection.
Fleece, 100% polyester anti-pilling, 300gr/m², zip closure. 2 inset pockets, adjustable waits by cords. Available sizes: XS-7XL (4XL and 6XL excluded). Available colours: red, royalblue, navy, bottlegreen, grey, black.
Baseball bumpcap with reduced peak (55mm) and ABS protection. Sizes: 52-65cm.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
PC visor in clear polycarbonate, mechanical side arms. Compatible with the Uvex pheos helmets with short peak E-S-WR, B-S-WR and pheos alpine (+adapter) and compatible with the K2H earmuffs. With uvex supravision excellence coating technology: anti-fog on the inside and anti-scratch an chemical resistant on the outside. The visor is easy to clean thanks to nanotechnology.
Sportive safety spectacle with clear polycarbonate lenses provided with the Supravision Excellence coating: antifog and antiscratch. 100% metal free. The end of the temple has a notch so that an eyewear cord can be attached to the spectacle. Frame: blue/anthracite. industrial applications. PCF (Product Carbon Footprint) = 0,21kg CO².
Comfortable fire retardant bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. Protective liner is removable. Size: 53-63cm.
High shoe in waterresistant premium full grain leather, with a non metallic antiperforation sole and 200J toecap. Fitted with a breathable, abrasion resistant liner in Coolmax. 100% metalfree. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, ergonomic insole. Sizes: 35-48.
Detectable beard mask in polypropylene with metal strip. Perfect for use in food or agro industry. Available colour: blue.
Arm protector, polyethylene, thickness 20 microns, length 40cm. Pack of 100. Available in: blue, white, red, green and yellow.
Welding and heat-resistant glove, Fully lined, 0,8-0,9 mm, Full grain goatskin, Full grain goatskin, Cut resistance level 4, KEVLAR® fiber, Nomex®, Cat. III, Brown, black, Extra long, Reinforced seams, Water and oil repellent, Elasticated 180°, for allround work. EN 388:2003, 3422 EN 407:2004, 41234X
Sporty lightweight (34 gr) goggles with grey polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety, standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With textile headband. Includes Supravision extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
The work jacket offers plenty of storage options due to the different pockets. By being able to cover all metal push button closures, this work jacket is extremely suitable for the automotive sector or other activities where the prevention of damage to the surface is very important. This is also a very pleasant portable and multifunctional work jacket for other sectors. Available sizes: XS-5XL. Available colors: navy, black and dark gray.
Polo piqué with stretch. The ladies' model has a three-button closure and the ladies model has 4 buttons. Neck tape, side vents and ribbed cuffs. Quality: 95% cotton, 5% elastane, 200 g / m². Available sizes: XS-2XL. Available colors: White, gray melange, red, navy, blue, green, black and dark gray.
Glove with black HPPE and Zirnium and black PU coating and reinforcement in black split leather on palm, and fingers. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Highest cut resistance. Sizes: 7-11, lenght: 25cm.
Radiant heat cover to cover head and shoulders for airhoods M-400. No PPE.
Apron made of polyester / cotton with one large hand pocket on the front. This apron is available in sizes S-XXL in the navy and dark gray nimbus. The Eloise apron has a standard length of 80 cm.
Synthetic wipes, soaked in disinfectant liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
Cederroth First Aid Kit Medium is a First Aid Kit made from a durable rubber-like material with a matte finish to keep dust, moisture and dirt at bay. It keeps the equipment hygienically clean, so it is always ready to be used. The products are packed in transparent plastic pockets, so you can clearly see all the products, making it easy to find the product you need when every second counts. All products come with clear, self-explanatory instructions. The kit is bright green and yellow, making it easy to see from a distance. The practical handle with an adjustable Velcro strap makes it easy to attach the case or carry it with you. Suitable for 2 persons. Dimensions: 231 x 190 x 78 mm. Content: 1 Breathing Mask (REF 2596), 2 Pairs of Gloves (REF 2596), 6 Salvequick Wound Cleansers (REF 1880), 2 Safety Hand Cleansers (REF 2596), 1 Rescue Blanket with a heat-reflecting aluminium side (REF1892), 1 Scissors (REF 270002), 1 Cederroth 4-in-1 Bloodstopper (REF 1910), 1 Cederroth 4-in-1 Mini Bloodstopper (REF 1911), 1 Cederroth Burn Gel Dressing (REF 901900), 10 Salvequick Plasters (REF 1880), 4 Salvequick Maxi Covers (REF 658024), 1 Elastic Bandage 8 cm x 4 m (REF 1882), 1 Contents List, 1 First Aid Instructions.
A set of high intensity, highly reflective accessory stickers, for the Nexus range of safety helmets. Helps to ensure maximum visibility of workers in low light level environments. 7 different stickers provides coverage on front, side, rear and top of the helmet.
Shift work trousers with concealed zip, thigh pocket with concealed press stud fastening, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, Cordura® knee pockets, 1 back pocket with concealed press stud fastening, reflective piping, D-ring, extra insert at crotch to prevent tearing. Quality: 65% / 35% polyester / cotton, 2/1 twill weave, 245 gr / m². Available sizes: 44-66. Available colors: Navy / gray, black / gray, and charcoal gray. Compliant with: EN 14404.
Sweater with stand-up collar and zipper: Mid front closing with short zipper; Coding flap; full sleeve hem with elastic; stocking hem; 2 horizontal reflective bands on the front, back and sleeves. Available colors: fluorescent yellow / navy and fluorescent orange / navy. Available sizes: XS-4XL. Compliant with: EN ISO 20471 Class 2.
Short-sleeved fabric jacket, 100% cotton, 250g / m². Available in white. No PPE.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 2m. Anchor point for protection of one person.
Bib and Brace with two holster pockets that can be tucked into the side pockets, one with an extra pocket and one with tool loops. Adjustable elastic braces. Spacious front pockets for phone and papers. Leg pocket with attachment for ID-card. Back pockets with flap and Velcro closure. Reflective piping on outside leg. Reinforcements on the holster pockets, folding rule pocket and on knees. Internal pockets for knee protectors, adjustable in two height levels. Size C42-C64 can be extended by 5 cm. Quality: 65% polyester, 35% cotton 245 g/m2. Available Sizes: C44-C62, D96-D120, C146-C156. Available colors: Black, navy, khaki, grey, sky blue, red and forest green.
HI-VIS shorts with: • shorts with side pockets; • back pockets with flap and velcro closure; • ruler pocket with knife button. Quality: 80% PES / 20% cotton. Available sizes: 42-64. Available colors: Fluo yellow and fluo orange. Compliant with: EN ISO 20471 class 2/1.
Women's shirt in 60% cotton / 40% polyester, 110g / m². The product has an anti-odor and antibacterial finish, making it difficult for unwanted odors to penetrate into the material. Available sizes: 32-56. Available colors: white, blue.
T-shirt bicolor with slanting seam on the chest. Quality: 50% Combed cotton / 50% Polyester, 190 g / m². Available sizes: XS-8XL. Available colors: navy / royal blue, royal blue / navy, gray / red, black / red, black / orange, black / lime, black / yellow and black / gray.
First-aid kit Multi without filling incl. Wall holder. Dimensions: 43 x 31.5 x 15.5 cm. Weight: 2750 gr.
Classic fleece vest with the rich appearance of polyester. This vest has two zip pockets that allow you to store your belongings. Quality: 100% Polyester, 225 g / m². Available colors: Dark gray, black, navy and khaki. Available sizes: XS - 5XL.
Comfortable short work trousers with sufficient storage space. Quality: 65% Polyester / 35% Cotton, 245 g / m² Available sizes: 42 - 66 NL. Available colors: Navy, Black, Dark Gray and Khaki.
The T-shirt Multinorm Bicolor with long sleeves is made of 60% modacrylic, 39% combed cotton and 1% carbon with a fabric weight of 200 gr / m2. Available colors: Fluo yellow / navy. Available sizes: XS-5XL. Compliant with: EN ISO 20-471 class 2, EN ISO 11612 and EN 1149-5.
Comfortable and breathable overall with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 44-64.
Overshoe in nonwoven PP with strong anti-slip sole in PVC. Color: white on top and blue on the sole. Size: 170 x 410 mm, no PPE.
This stylish jacket is made from 300D Oxford woven fabric and offers maximum water and windproof performance for good year-round protection. This jacket is very flexible and can be worn in three unique combinations, which makes the jacket extremely versatile. Numerous inner and outer pockets provide excellent and safe storage for your personal accessories such as your phone or tablet. A sporty fit and an unobtrusive contemporary design make this the jacket you choose in demanding conditions. Properties: Waterproof and taped seams prevent water from entering Reflective striping to be more visible Detachable sleeves, "fur" lining and "fur" collar for many wearing options Jacket can be worn in three ways for multifunctional use 9 storage pockets Phone pocket Two-way zipper for easy opening Concealed detachable hood for more functionality Radio loop for attaching a radio. Quality: 100% PES. Available sizes: S-3XL. Available colors: fluorescent yellow / black and fluorescent orange / black. Conform: EN ISO 20471 class 3.
The Roadrunner chainsaw protection chaps come in handy when you only use the chainsaw for a short time and chainsaw pants are just too impractical. The biggest advantage of the Roadrunner chaps is that you can quickly put them on over your regular work trousers or jeans with a few simple clicks. Thanks to the adjustable buckles at the back, 2 sizes (M for sizes up to XL and L for all sizes from XL) are sufficient to fit almost everyone. Quality: Water-repellent 65% polyester - 35% cotton outer fabric ± 210 g / m2. Available sizes: M-XL. Available colors: Grjis / black. Conforms to: EN ISO 11393-2: 2019 / class 1 - 20 m / s design B and EN ISO 13688: 2013.
Flame retardant, anti-static hi-vis bodywarmer Vikja: Straight collar; Zip closure under flap with touch <(>&<)> close fastening; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket. Quality: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluo orange/navy.
White clog made out of microfiber with steel toecap. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 40-48.
Hi-vis coverall Mornant with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo orange/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
