BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Flame retardant and antistatic ladies pants in strong inherent flame retardant material with an increased visibility at the bottom of the legs. Concealed zip, 2 deep side pockets, 2 back pockets with flap, folding ruler pocket, separate leg pocket and knee pockets. Available sizes: 36-46 EU. Available color: navy. Compliant with: EN ISO 11612 A1A2B1C1E3F1, EN 1149-5, EN ISO 11611 Class 1, EN 13034-6, IEC 61482-2 Class 1 (ATPV: 15 cal / cm²) PPE category 3.
T-shirt bicolor with slanting seam on the chest. Quality: 50% Combed cotton / 50% Polyester, 190 g / m². Available sizes: XS-8XL. Available colors: navy / royal blue, royal blue / navy, gray / red, black / red, black / orange, black / lime, black / yellow and black / gray.
Classic fleece vest with the rich appearance of polyester. This vest has two zip pockets that allow you to store your belongings. Quality: 100% Polyester, 225 g / m². Available colors: Dark gray, black, navy and khaki. Available sizes: XS - 5XL.
Low shoe in waterresistant full grain leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a bre athable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/E-TPU Infinergy® extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 38-48.
Extremely flexible goatskin work glove, designed for tough, hot working environments. Upper reinforced with heat resistant meta-aramide fibres and reinforced knuckles. Inner hand lined with para-aramid, which also provides cut protection level B, and reinforced externally for enhanced protection. Heat resistant double stitched seams. Sizes: 7-12.
Cottover hoody with ribbed cuffs and bottom hem. Inside of the hood in single jersey. Two front pockets. Quality: 80% organic Fairtrade cotton, 20% recycled polyester, 280 g / m². Available sizes: S-4XL.
The Roadrunner chainsaw protection chaps come in handy when you only use the chainsaw for a short time and chainsaw pants are just too impractical. The biggest advantage of the Roadrunner chaps is that you can quickly put them on over your regular work trousers or jeans with a few simple clicks. Thanks to the adjustable buckles at the back, 2 sizes (M for sizes up to XL and L for all sizes from XL) are sufficient to fit almost everyone. Quality: Water-repellent 65% polyester - 35% cotton outer fabric ± 210 g / m2. Available sizes: M-XL. Available colors: Grjis / black. Conforms to: EN ISO 11393-2: 2019 / class 1 - 20 m / s design B and EN ISO 13688: 2013.
Black clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 40-48.
White clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 35-42.
Comfortable half mask in TPE with replaceable ABEK1P3filters. For protection against most organic and arorganic gases and vapours, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivates, toxic dust, vapour and smoke particles metal fumes, mists and micro-organisms. Sizes: S/M and M/L.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
This glove was developed together with experts from the Dutch Defense. The target was to develop a glove that offers both a maximum protection during fast roping practices and a high tactility for handling weapons in case of interventions. Where most fast roping gloves fail to meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm offers superb grip on both dry and wet ropes and is a great buffer against the heat accumulation during fast roping. On top of that, in this case handling weapons with these gloves is no longer a theme. Sizes: 7-14.
High shoe in mesh/nubuck leather with a synthetic antiperforation sole. Fitted with a Gore-Tex liner. EVA/rubber outsole with scuffcap, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-50.
Flame retardant trousers Barcus with arc protection: Front fly with zip closure; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket; 1 gusset pocket; Elasticated waist; Knee pockets; Waistband with loops for belt. Quality: 24% PES + 75% cotton + 1 AST; ± 250 g/m². Available colors: Blue/fluo yellow. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Hi-vis parka bicolor: Waterproof, Breathable, Windproof and with reflective striping. Available sizes: XS-8XL. Available colors: fluorescent yellow / navy and fluorescent orange / navy. Conforms to: EN 343: 2003 Class 3: 1, EN ISO 20471: 2013 Class 2.
Waterproof fully lined winter glove with soft, durable goat grain in the palm. The glove has touchscreen function on the back of the middle finger, pre-shaped fit and synthetic stretch material at back of hand. The cuff, which has a half<(>&<)>#02;length cut, is elastic at wrist to ensure that the glove stays firmly in place. Sizes: 6-13.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Flame retardant Hi-Vis work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the work trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have nail pockets. Quality: Cantex Stretch, 365 g/m². Available sizes: 44-64, 146-156, 84-120. Available colours: Fluo yellow/navy. Complies with: EN ISO 11612 A1.A2.B1.C1.F1, EN 61482-2 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 1149-5 and EN ISO 20471 class 1.
Bicolor sweat jacket with contrasting zip on the front and on the side pockets. Contrasting neck tape. 2x2 rib with elastane at the bottom hem and at the cuffs. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Zipper pullers in contrast color. These can be replaced by one of the other available colors if desired. Oeko-Tex 100 certified. Quality: 50% organic cotton, 50% recycled polyester, 280g/m². Available sizes: S-5XL. Available colors: Blue/Navy, Navy/Blue, Black/Orange, Black/Red, Black/Grey and Gray/Black.
Hi-vis parka 3-in-1: • wind and waterproof jacket with removable inner jacket; • outer jacket with a 2-way zip; • reflective details; • vertical breast pockets; • badge holder; • large side pockets; • detachable and adjustable hood; • adjustable waist; • adjustable cuffs with velcro; • lightly padded inner jacket; • side pockets with zip and internal loop; • inside pocket with zip and telephone pocket. Quality: 100% Polyester. Available sizes: XS-4XL. Available colours: Fluo yellow/black, fluo orange/black and fluo yellow/navy. In accordance with: EN ISO 20471 class 3.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in Gore-Tex. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Hi-vis sweatshirt PW277: Knitted cloth with brushed back; neck protector; ribbed cuffs; Knitted Hem; Certified to EN ISO 20471 after 50 washes; UPF 40+ fabric blocks 98% of UV radiation. Quality: 65% Polyester, 35% Cotton, 300g/m². Available colours: Fluo orange/black <(>&<)> fluo yellow/black. Available sizes: S – 4XL. Complies with: EN ISO 20471 class 2.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in SympaTex. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
High shoe S3 in waterresistant black microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in SympaTex. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35-52.
Low shoe in Putek® PLUS (68% recycled polyester), with a non metallic antiperforation sole (50% recycled polyester) and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF BioMass Balance (100% renewable sources), SRC antislip, oil and carburant resistant. Removable perforated insole Maxi-Soft Duo Green composed of a layer of PU Dynamic from BASF® with thermosensitive shape memory and a layer of BASF® BioMass Balance Elastopan, this improves weight distribution, reduces pressure points and absorbs and relieves stress on the body when standing for long periods and walks. 100% metalfree. Sizes: 35-48.
Standard fall harness with straight leg straps and 2 attachment points (back and chest). Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with buckle through buckle closure. Tires made of water and dirt-resistant polyester. Fall indicator front and back.
Glasses with clear polycarbonate duo-lens, equipped with supravision coating. With clip-in frame. Glasses with adjustable ear springs and soft-flex nose-bridge. Fits the face perfectly. X-tended sideshield for increased side protection. With supravision Excellence coating: Hi-tech coating, scratch-resistant on the outside, free of condensation on the inside, chemically resistant and very easy to clean. Colour frames: blue/charcoal.
Durable unlined guide GTX synthetic leather work glove with impact protection for heavy duty work.
Dark grey hearing protector with HiViz orange element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 9 KN.
Uvex insole, ultra breathable and moisture absorbing. With perforations for better ventilation. Shockabsorbing and comfortable structure. Available in width 10, 11, 12, 14.
Safety helmet made out of ABS with integrated spectacle. Has a 6-point textile cradle (53-64cm). Compatible with (1038817 KINRIEM 4-PUNTS VR EVOLITE/EVO). Available in: white, blue, red, white/smoke, blue/smoke, black/smoke, orange smoke and green/smoke.
Black boot made out of Acifort. An excellent boot for numerous industrial applications. The shaft has good resistance to fuels, acids and alkalis. the sole is also resistant to oils and fats. Equipped with steel toecap and steel midsole. Antistatic. Sizes: 37-49.
Service pants in full stretch that provides maximum freedom of movement and comfort. Modern fit. Leg pockets on both sides with zip closure, phone pockets on both sides with Velcro closure. Folding rule pocket on the right side. Internal back pockets. Pre-bent knees. Internal pockets for knee protectors, adjustable in two height levels. Wider belt loop at the back to prevent pressure from belt. D-ring in front. Hidden attachment for holster pockets (ref. article 9042). Hidden button at front. Material:1: 65% polyester, 32% cotton, 3% EOL - 220 g/m2 Material 2: 91 ,5% nylon, 8,5% spandex Weight:250 g/m² Color comment:navy-58, grey-98, black-99 Gender:Men
Sweat band in black PU for helmet Pheos Alpine. Not certified seperatly as PPE.
Ki-Waistcoat TR310 with integrated lifevest: • Buoyancy 310N • Tricot mesh; • ID pocket; • VHF pocket; • Antenna/mic attachment; • Knife attachment; • Adjustable width; • Crotch strap. Available colours: Fluo yellow. Available sizes: S/M, L/XL and 2XL/3XL.
Dark cut resistant glove made with the latest Dyneema® Diamond technology and a black, abrasion resistant PU coating. Guaranteed medium cut resistance (level C) combined with short-term protection against contact heat up to 100*C in a lightweight glove. A "breathable" glove, tactile, touchscreen compatible, electrostatic properties and good grip make this a comfortable, versatile solution. No fiberglass is used. Complies with EN388:2016: 4.X.4.3.C, EN407:2020:X.1.X.X.X, EN16350
10x blue nose clips for face mask.
Hygiene set for Optime I.
Hygiene set for hearing protector AEARO HY79 (Lite com III & Basic).
Storage or transport bag for adflo motor unit. Only for motor unit, not suitable for storing helmet. No PPE.
High visibility disposable coverall in TYVEK® (type 5/6). Coverall with collar, reflective striping on the shoulders, chest, arms and legs. Elasticated waist, ancles and cuffs, zip closure. Available sizes: S- 3XL. Available colour: hi-vis orange.
Plastic pump for liquid 500ml 9972103.
Dust mask, class P1, for irritating dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the mask always retains its shape, even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhal ation resistance and low levels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands. NPF: 4.
High shoe in black full grain leather. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in PU/VIBRAM. Sizes: 35-51
Kit for helmet with Contour screen in grey high transparency tint, Contour carrier and chin-guard. Uses nano-particles to protect against mechanical, heat, and radiation risks in the event of arc due to electrical errors.
Vibration absorbent gloves made of pigskin leather with breathable Spandex® and PVC shell for extra protection of the back of the ha nd. Provides excellent vibration and shock absorption due to patented NU202 polymer. With breathable backside, elastic collar and re inforced fingertips for longer service life. Colours: black with high-viz accents.
Long johns / Thermal / Seamless / Outside: Front fl y / Ribbed ankles for extra comfort /Fabric: SIO-FIT® Thermal wear:50% Viloft® - 50% polyester(interlock); ± 210 g/m² Colour: BS0 navy
Anti-static absorbent cleaning pads measuring 30 cm x 38 cm. Packaged per 500 pieces. These absorb oils, water, solvents and acids. Ideal for cleaning tools and machines. One-time use prevents risks caused by hazardous substances or metal particles left behind by a previous user. Solvents and oil-based cleansers adhere to these wipes better than to cotton or paper wipes. Absorption capacity: 3 8 litres for 500 pads.
Even a step beyond the Gravity Zero 9191, which feels light, is the Super G 9172: truly the lightest safety glasses: just 18 grams. The lens, moulded with increased injection pressure, is noticeably thinner yet provides the same protection as other Uvex lenses as well as identical, optimal optical properties. UV400 protection, soft temples (DCT). The clear polycarbonate lens has the Supravision Plus coating: antistatic, scratch resistant on both sides, antifog and antistatic inside and out.
Comfortable duo-lens safety glasses, fit tightly against brow and cheek. Transparent grey. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Goggles made of plastic with a large field of vision, fitted with a clear CA lens with anti-fog coating. Using a specially designed clip (not included, Uvex ref. no. 9924.010/VDP: 1000249), the goggles can be directly attached to the 30 mm slot on a safety helmet. Thanks to the clever attachment system, the goggles are no bother when they are not in use and they fit comfortably when the attachment is lowered.
Blue zig-zag folded towels made of very high-quality material. High absorption capacity and very high absorption speed. Dimensions: length 20,5 cm x width 25 cm, 2 layers. Packaging: 20 bundles of 250 towels.(= 5000 pieces per box)
Synthetic bag for Rollgliss device with rope. Volume: 45 L. can be carried on the back using adjustable carrying straps. Bag can be closed securely.
Bottle for long-lasting, effective anti-fogging treatment and intensive anti-static treatment of lenses in masks, visors, glasses, etc.
Escape hood with COP2 filter, provides protection against smoke from fire, among other things. Easy to put on, even for people who wear glasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in sealed two-part wall box. Dimensions: h x w x d 28.5 x 15.5 x 12.5. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
Protective foil for visor of full face mask 3S. Protects the visor against scratches and liquids.
Empty first aid kit box made of impact resistant ABS plastic. San (320 x 220 x 125 mm) for maximum 20 people.
Hazardous electrical voltage. Hazard warning sign in polypropylene. Dimensions: 100mm. 3 pictograms per sheet.
Smoking prohibited. Prohibition sign in self-adhesive polyester. Diameter: 315mm.
Frost-free emergency shower and eyewash fountain, with stainless steel pull handle and UV resistant ABS coating. Works to -50 °C wit h a self-regulating heating cable.
Small, multifunctional bin for quick and efficient response to leaks or maintenance projects, anywhere in the factory. The spill kit includes a handy inner panel with well organised, clearly legible leakage guidelines. Absorption capacity: 59 litres. Content: 1 roll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of UN quality.
Absorbent pillows measuring 43 cm x 48 cm. These heavy-weight cushions are packaged in a box. Packaged per 16 pieces. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these pillows as chemical waste. Absor bent pillows for regular leaks in the same place. Absorption capacity: 105 litres.
Anti-static absorption mat measuring 76 cm x 46 m. This heavy-weight absorption mat is double perforated and absorbs oil, water, coo lants, solvents, acids and bases. Ideal for use as walk-on mat and for use in production halls and factories. The durable, abrasion resistant upper layer with camouflage colouring draws moisture into the bottom layer. Absorption capacity: 197 litres for 1 roll. Su itable for: general industrial use.
Safety shoes required. Mandatory sign in self-adhesive polyester. Diameter: 200mm.
Headband suitable for Speedglas 9100 welding helmet. Includes attachment set. Not separately approved as PPE.
Automatic welding helmet from the 9100 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. With three automatically darkening welding filters and replaceable side win dows. Width of welding filter: 45x93mm. Battery life: 2800 hours.