BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Economical solution for light applications where a durable coating and firm grip is required for working in greasy conditions. The double-layer nitrile coating with a roughened finish keeps hands dry and comfortable, and provides a good grip. Fully coated glove on 13 gauge polyester liner. Sizes: 6-11. Conforms to: EN388: 2016 4.1.2.1.A
Low safety shoe in microfibre with synthetic antiperforation sole and a steel toe cap. Gore-Tex lining. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
The latex coated glove with steel, fiberglass, Kevlar lining and extra long knit cuff is the practical solution for a safe way to manipulate glass, metal and plastic. She is distinguished by an exceptional cut resistance, excellent overall mechanical performance and superior comfort. In wet or dry conditions, this glove an excellent grip thanks to the coating on the palm of natural rubber. The PowerFlex ® 80-658 is a unique glove on a highly efficient way to adequately protect combines with natural dexterity.
Composite gloves with dielectric properties coated with natural latex, with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 2: operating voltage 17,000V, test voltage 20,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Sizes: 8-11. In line with EN 60903.
Bodywarmer, 65% polyester, 35% cotton, 190gr/m²
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 2500 volts, operating voltage of 500 volts. Length 36 cm, Sizes: 6-12.
3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with an anti-scratch and anti-fog coating. Marking: 2C-1.2 1 FT KN.
High shoe in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
High shoe safety shoe S3 in black full grain leather with uvex waterstop technology. 200J synthetic toecap, steel anti-perforation sole and scuffcap. Fitted with a breathable textile lining. Padded tongue and removable, antistatic insole, moisture absorbent. Sole made of PU/PU: suple and lightweight, oil and petrol resistant, slipresistant. Sizes: 35-52 (10, 11, 12).
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-63 cm) and highly absorbent hydro-flock sw eatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Colours: white, yellow, blue, red, green, orange.
Screen carrier S54CE Centurion for attachment to Centurion face shields and safety helmets. This screen carrier includes CONNECT & 3 0 mm ADAPTER for immediate attachment to Centurion helmet. Also suitable for addition of Centurion hearing protection (HELMET HEARIN G PROTECTION BALTIC SNR25 & HELMET HEARING PROTECTION SNR30).
Safety helmet made of polyester resin with fibreglass reinforcement. Lightweight: +/- 370 g. Heat resistant to +/- 400 °C. textile h eadband. Plastic sweatband at front. Colours: white and yellow. Headband adjustable with ratchet.
ABEK2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >6 5 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Only for use with full face masks with sta ndard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Flame retardant, anti-static T-shirt with long sleeves, Very soft handle, Comfortable, Good moisture regulating properties, lightweight, Inherent flame retardant <(>&<)> anti-static, Outside: Long sleeves, Elasticated wristband, Fabric: 60% Protex® - 39% Viloft® - 1% AST (Jersey); ± 175 g/m². in line with: EN14116 index 3, EN 1149-5.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: CO with alarms at 20PPM and 100PPM. (min. 5PPM and 200PPM) Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Helmet hearing protector Sana 25for safety helmet CENTURION.
Washable, reusable and detectable pre-formed earplugs made of softsynthetic material, with 3-rib design. These earplugs have a comfortablefit and offer excellent protection against universal noise. These earplugs are detectable by means of a tiny steel ball embedded in the front of the earplug. Ear protection with a sophisticated design that is primarily useful in the food industry. Packaged per 50 pairs.
Sporty lightweight goggles with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety, standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With synthetic removable headband. Includes Supravision extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 180 °C. Silicone Free.These gloves are suitable for: handling hot glass, rubber tyres, belts and removal of forms from injection moulding machines, vulcanising, calendering, removing thermoplastics from moulds, handling hot moulded materials, handling hot wooden sheets, removing sterilised products from autoclaves. glass industry, rubber industry. Sizes: 8/9/10. length: 33 cm. In line with: EN388:2016 2.2.4.1.B, EN 407 X.2.X.X.X.X.
Effective skin protection against water-soluble substances. Stokoderm Aqua stabilises and regenerates the skin barrier and prevents softening of the skin during damp work and inside gloves and protective clothing. Also an absolute must for frequent contact with water-based substances: water-based oils and cooling lubricants/ water-based solutions of dyes, acids, alkaline solutions, salts, cleaning agents and disinfectants/ cement, lime and fertilizers. Stoko Protect+ tube 100 ml. Protection against water-soluble substances. PPE category: not applicable.
Blue safety glasses, polyamide frame and polycarbonate lenses. Universal size. Suitable for protection against impact.
Safety helmet made of ABS, fitted with a 4-point textile suspension with wheel adjustment (54-62cm) and synthetic sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.
Beige/brown low shoe S3 in full grain leather with steel toecap and synthetic antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39 - 48.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Low shoe in waterresistant black nubuck leather, with an synthetic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-47.
Thicker than our average latex glove. The fingertips are thicker than most standard latex gloves for ultimate protection. The enhanced fingertips with relief allow for a sure, reliable grip in demanding work environments, while increasing mobility for more productivity. Regardless of whether the tasks to be performed are moderate or heavy-duty or whether you are working in a dry or wet environment, your hands will always stay safe and dry.
Low shoe in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Low shoe in microfiber/Cordura, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. With a scuffcap and BOA closing system. Outsole in PU/PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal and leatherfree. Sizes: 36-48.
Ideal for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Gloves with chemically resistant coating consisting of five layers, with hypo-allergenic lining. Can also be used as liner gloves. Extremely supple and ergonomically formed model based on patented seam technology. Offers protection against an exceptionally wide range of chemical products and solvents.
Flame retardant, anti-static hi-vis bodywarmer / Windproof / Breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Very comfortable / Supple / Good cold protection / / Stitched seams / Can be zipped into different jackets / Outside: Straight collar / Zip closure / 2 Patched pockets / Elastic drawstring in hem / Back length 75 cm (L) / Inside: Fixed quilted Flame retardant cotton lining / 1 / Inside pocket / Fabric: SIOPOR® FR AST: / 100% polyester / Fabric with / 100% FR PU coating + AST; ± 250 g / m² Colour: 278 hi-vis yellow / navy - 279 hi-vis orange / navy
Extra strong oil absorbing cloths. The perfect solution when durability or tear-resistance is required. Dimensions: 41cm x 51cm. Absorption capacity: 136 litres per 200 cloths.
Replacement knifes for safety knife Profi 40. Dimesions: length: 71,20mm, width: 18mm, material thickness: 0,50mm. Package: per 10 pieces. No PPE.
Spare blades for safety cutter Klever X-change (1018439)
Black Zirnium yarns knitted glove with black nitrile foam coating in the palm. Excellent cut resistance and dexterity and very good grip in oily conditions Sizes: 7-11.
Ladies t-shirt in organic cotton with a round neck, double-stitched neckline with rib trim and side seams. Quality: 100% ecological Fairtrade cotton Available sizes: XS-2XL.
CO2 measuring device to monitor indoor air quality. Unique design, look and feel, easy to use. Clear indication of the CO2 concentration on the display. Adjustible visual and acoustic alarm settings. Algorithms that indicate the air quality based on CO2 and type of actifity. Measuring range: 400 to 2000ppm, temperature: -20°C to 60°C, humidity from 0% to 100% RH. Life span at least 36 months, does not require calibration. The HTRAM calibrates itself every 7 days. The device can be connected via the Transmission Risk Air Monitor by Honeywll Int. app on a smartphone when it is near the detector. By using the app, one can configurate custom alarm settings. USB cable for charging is included, plug must be ordered separately 1051636.
Supple latex gloves with rolled cuff to prevent leakage in wet conditions.
Signa T-shirt Bird Eye Knit, 100% polyester, rond collar, weight 150 g/m².
Trouser in quilted nylon, use as insulating intermediate layer againstthe cold, zip closure. Available in: black. Sizes: S - XXL. Suitablefor: transport and distribution sector, agriculture and food industry. PPE category 1.
Hood, knitted Nomex®, flame retardant, with long collar, oval face opening. Available in: white. Sizes: 1 size.
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF-free.
The Stability Pro insole gives extra pronation and extra support to the inside of the foot. It provides optimal support to the heel and middle foot. Absorbs excessive perspiration moisture and promotes optimal fit due to lateral support for the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. X-Static is also thermodynamic. Excess heat is removed, preventing blistering.
The new INTERCEPT™ fibre offers unrivalled cutting protection and more comfort and mobility. The coated palm design gives the user more grip, prolongs the life of the glove during abrasive work and allows the back of the hand to breathe. The silicone-free PU coating does not hinder processing of painted metal parts. The grey coating camouflages dirt when working in polluted environments.
This glove combines tough protection with natural comfort. The Intercept™ Cut Resistance Technology provides extreme cut protection, the liner made with water-based polyurethane/nitrile provides enhanced comfort and dexterity, it is solvent free and OekoTex 100 certified. The Fortix technology provides extended use with up to 4x the durability in the thumb crotch region versus the standard glove without thumb crotch reinforcements. Latex and silicone free. Sizes: 6-11.
Thin, flexible work glove – part of our ENVI sustainable products series. ENVI gloves are manufactured using less energy and/or less water consumption. They are also DMF, butadiene and silicon-free. 3304 has a 15 gg liner made of glycose/glycerol starch and small amount of nylon for a more sustainable choice and exceptional moisture management. Approved for contact heat level 1 and Oeko-Tex certified. Premium nitrile palm dipped. Touchscreen.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles.
Polyethylene marker tape to clearly demarcate a danger zone. Delivered in a handy, cardboard carrying box. Width: 8 cm, length: 500 m. Colour: yellow/black.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry str ap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coup ling.
Safety knife with automatic blade retraction system. Designed for all normal cutting jobs, especially box-slitting. The ergonomically squeeze lever - made out of aluminium and a soft plastic component - provides comfortable and non-slip handling. For use by right- and lefthanders. Easy blade change: no extra tools required. With 2-edge/4-point blade for extra economy. No PPE. Blades: 1016658
Chain mail glove made of 100% stainless steel. Adjustable closure around the wrist, also 100% stainless steel. Chain mail offers maximum protection against cutting risks. The glove is ambidextrous. A coloured identification tag on the wrist band indicates the size. Sizes: XXS (brown) / XS (green) / S (white) / M (red) / L (blue) / XL (yellow).
Grey safety goggles type Skylite with soft orange DCT element. Offerscomfort and a profound protection. Adapts to the face perfectly.Combines the security of goggles with the comfort of a pair of glasses.Plastic frame and clear polycarbonate lenses. Plastic frame and clear polycarbonate lenses. All Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres, this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Cobra hybrid safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below, and has an anti-slip temple and branches. Ventilated. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti-fog coating. Protective bag included.
Lined working glove in synthetic leather. With open cuff, very thin. Sizes 7-11.
High shoe S3 in full grain leather with steel toecap and steel antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39 - 48.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Very durable gloves for all extended tasks in cold conditions. Double nitrile coating on insulating lining.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colou r: black.
Safety helmet made of ABS. With 4-points suspension 'Fas-trac' in textile (52-64cm), with a wheel and highly absorbent PVC sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange, gray, black. Weight: 400g.
Glove in butyl rubber, unlined, length 35 cm, thickness 0.5 mm. Colour: black. Flexible and comfortable, protects against a wide range of chemical products, detergents and solvents, liquid-tight. With roughened palm for better grip. Silicone-free and antistatic. Sizes: 7-10. Suitable for chemical, petroleum and paint industry, transport and handling of hazardous products.
Antistatic clog autoclave Studium, very suitable for surgery and aseptic places. With antislip SRC, antistatic ESD and shock absorption in the heel. Adjustable heel strap. Autoclavable up to 134°C. Available in different colours and double sizes. Sizes: 35/36 - 45/46.
Safety glasses with grey frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti- scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and in hibits vapour formation by more than 2 minutes. Not supplied with glasses cord.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam in the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
High shoe in microfiber, with a synthetic antiperforation sole and metal 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Work trousers in easycare material that ensures good retention of shape and color. The pants have two back pockets with flap and velcro closure, ruler pocket with knife button, adjustable knee pockets on the inside (two heights), reinforcement on the ruler pocket and knee pockets. The sizes C42-C64 can be extended by 5 cm. Quality: 65% polyester, 35% cotton. Available colors: red, sky blue, navy, green, khaki, gray and black. Available sizes: C42-C64 (extendable to C142-164), D84-D120.
Cut resistant 5-finger glove with palm and back in water repellent cowsplit leather. Inner lining reinforce with knitted TEKINOX®. 15cm cotton protective cuff with extra wrist protection and seams in para-aramid. Total lenght: 35 cm. Sizes: 7-11. Suitable for : metal and glass industry, heavy industrial activities. In line with. EN388:2016: 4.X.4.4.F
Standard work sock. Composition: 75% Cotton, 22% Polyester, 3% Elastane Sizes: 39/42, 43/46, 46/48.
