BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Robust glove with a thin lining in PVC type 690: Long sleeve model (60 cm), thermally attached with elastic end, made with an air vent. Suitable for immersion, disinfection, cleaning of sewers, deep sea fishing.
Lamp with wide uniform beam that can be oriented (45°). Adjustable and washable elastic headband. Easy to wear on the head or directly mountable on a helmet. Large rotating selector button with different modes facilitates manipulation with gloves. Lumens in close-work modus: 30, in- motion modus: 40. Waterproof: 1m for 30min. Weight: 160g.
Adjustable comfort pad for head band with turning button.
Lightweight welding safety glasses in polycarbonate with Pressure Difffusion Temple technology for perfect and secure fit. This glasses have very good colour recognition, Scotchgard anti-fog coating, a large field of view and brings resistance to UV-rays.
High shoe in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Men's polo with short sleeves, modern polo piqué in stretch, fitted fit, three-button tone-on-tone, neck tape and side vents. Quality: 95% cotton, 5% elastane, 215 g / m². Available sizes: XS-4XL. Available colors: White, red, navy, gray, green and black.
Light and breathable ladies softshell: • zip up to the top of the collar with chin guard • slanting vertical breast pocket with zip • two hidden zippered side pockets • elastic cuffs • adjustable waist with drawstring • extended back Quality: 96% Polyester, 4% Spandex, 280 g/m². Available sizes: XS-3XL. Available colors: Navy, black, red, white, light gray and dark gray.
High shoe Toby S3 ESD HI in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/Rubber, resistant to fats and oils. Fitted with a scuffcap. Sizes: 39-48.
J-Energy series. Low shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, pol yurethane insole with textile layer. Sizes: 35-48.
High shoe in black waterreistant full grain leather with synthetic toecap and synthetic antiperforation mid-sole. PU scuffcap. DryShield membrane. Sole in PU/PU. Sizes: D (36-48), XD (39-48).
Classic fitover glasses with unlimited field of vision. Soft temples (DCT). Fitted with clear polycarbonate lens that provides 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material.
Seamless knitted cotton, No PPE 400gr/12pair
Lightweight and very comfortable face shield, 450 x 200 mm. With individually adjustable headband and forehead protection. Cellulose acetate visor: scratch and chemical resistant, but is not suitable for use at high temperatures or as protection against high impact.
High shoe in black full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Laces, black in polyester. Length: 125cm. No PPE.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
4-point textile chinstrap, compatible with V-Gard and ThermalGard.
High shoe in waterproof leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, waterresistant Gore-Tex liner. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-51.
Heating kit that provides heat for 10 hours after packaging is broken. To be used in combination with helmet caps; These warmers can also be used in gloves.
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 356mm. Breedte: 35,56cm.
High-cut, black safety shoe made of smooth full grain leather with 200J steel toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Padded water tongue. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non-slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: D (35-49), XD (37-49).
A1BE2K1/CO/NO/HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, toxic dust, vap our and smoke particles, nitrous gases and (to a limited extent) carbon monoxide. Only for use with full face masks with standard th reads. BE filter of class 2: for max. concentration of 0.5 %. AK filter of class 1: for max. concentration of 0.1%.
PVC/nitrile gloves with cotton lining for very good sweat absorption. These Fortex Pro gloves provide excellent resistance to chemicals, high tactility and a very good grip thanks to the roughened palm. Length: 35 cm.
Hood, Guardian H²O, flame retardant and antistatic, water- and windproof, breathable. Available in S-3XL
Composite rescue stick, used to rescue a victim (in the event of electrocution, blinding, etc.) during work on posts of the 1st, 2nd and 3rd categories. Allows the victim to be brought to safety by securing him at the waist. Length 1470mm. Weight 1.4 kg. Voltage 45 kV.
Fall-stop device 2 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is not required. The chinstrap incorporates a quick release buckle. Removable harness also fits all other Centurion helmets. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
High black shoe, brodequin style. Leg in water resistant full grain leather. Padded leg (upper section) in compact foam, lined with leather for improved comfort and protection of the shin and the Achilles tendon. Inner lining in 3-dimensional foam with open structure for good ventilation of the foot. Closed leather velour tongue to prevent small particles from entering the shoe. Shoe provided with a support to avoid swelling of the heel. Sole: comfort layer Softane, flexible and light with shock absorption. Sole is resistant to abrasives, hydrocarbons, oils and fats. Outdoor profile with self-cleaning studs. Full protection of the shoe thanks to a wide perforated protective toecap in Aérane-Tech polymer, which makes the shoe lighter. Thanks to the perforated toecap, the sweat can easily leave the shoe. The mid-sole is sewn straight to the leg, which makes the foot 100% enclosed. The anti-perforation mid-sole Flextane <(><<)>(><(>&<)><(><<)>)> # 153. HP by Jallatte is 100% composite. Sizes: 35-47.
Warm navy fleece with a 100% polyester mesh lining and a reflective horizontal band around the body and the arms. Two bags with zipp er and a breast pocket. Suitable to wear in conjunction with the Parka Iona S433. Available in sizes S-XXL.
Proflex knee support with reinforced nylon shell for protection against perforation. The knee support is filled with a gel for better comfort and support. The Proflex is cut resistant, abrasion resistant and has a non-slip surface for better grip on the work surface. Sizes: universal size.
Instant cold pack for single use.
Low shoe in microfibre with a steel toecap and plastic anti-perforation sole. With Smartec lining for good moisture absorption and an ergonomically comfortable insole. Outer sole in PU/PU. Size: 35-42.
Sportive glasses. Fitted with temple ends and nose with non-slip components. Top choice for working environments with dust exposure. Polycarbonate grey lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision coating. Frame: black/white.
Fall-protection harness with 2 attachment points: on the back and on the chest. Full D check anchor point. Leg and shoulder bands are easily adjustable. Chest and leg straps have quick-release buckles. Built-in drop indicator. Certified to use in combination with the life jackets Secumar Alpha and Golf.
Sustainable glove with a natural latex coating. The liner consists of 44% recycled material, namely 25% recycled polyester and 19% recycled cotton. The roughened latex coating provides a firm grip and good abrasion resistance. Versatile because the liner also offers a limited degree of cut resistance. (class B) and offers good short protection against thermal risks (up to 250 ° C). Possible applications: general maintenance, construction and logistics, green service. Conforms: EN388: 2016: 3.1.4.2.B, EN407: X2XXXX. Available sizes: 8-11.
Budget-friendly glove with black PU coating, large size range.
Care cream for hands and face. Time-tested qualities for heavily- stressed skin. Tube of 100ml.
Fire-resistent facial seal as spare spart of hoods M-series.
Goat leather gloves of standard quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver EC (standard quality) and Driver (super quality).
Gloves with a yellow nitrile layer on interlock lining. Coated palm, open back, tricot cuff. Good grip and abrasion resistance. Ideal for light work and in warm environments.
Black safety/fire fightingboot in nitril rubber with 200J non-metallic toe cap and synthetic anti-perforation sole(Sizes 36 and 37/38 toe cap and synthetic anti-perforation sole in metal). Outsole in nitrile. This boot offers an excellent protection against heat with emission of chemicals and contact with flames.
The SC1 in bleu laminate is a single use Type 3 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter. One piece construction, with chemically protective laminated gloves Kemblok welded to the suit material and integral socks in the same blue laminated material. Hood with neoprene rubber face seal. Sizes S - XXL: SCertified to EN14605:2005
Glove with PE and Zirnium with PU coating and reinforcement in split leather on palm, index finger and thumb. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 7 / 8 / 9 / 10 / 11.
Work trousers Millenia multirisk 12573 including: - 2 front pockets; - 2 back pockets; - 1 thigh pocket; - 1 meter bag; - knee pockets with cobra finnish. Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-64 BE. Available colors: Fluo yellow / gray and fluo yellow/navy. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN ISO 14116, EN 1149-5, EN 13034 type6 and IEC 61482-2 class 1.
Overshoes, CPE, heavy version (90 micron, one size. Available in: blue. Package containing 50 pieces. No PPE.
Low-cut, black safety shoe in full grain leather with steel toecap and antiperforation midsole. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight duocomfort (PU/Nitrile) outsole, with heel profile, high wear resistance, antistatic, slipresistant, resistant to oil, petrol and acid, high shock absorbency.
Martor replacement blades 5232. Packed per 10 pièces. No PPE.
Trousers, 100% polyester, PU coated, 190gr. /m², elasticated waist, reflective tape. Available in: navy blue, black.
ABEK2 gasfilter in plastic housing for Moldex masks series 7000 and9000. Protects against inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 2 gas filter: for max. concentration of 0.5%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Glove with palm in goat leather.Back and cuff in cotton. Kevlar liner in the palm. Protects against heat from sparks.Sizes : 8/9/10/11
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Safety glasses in clear polycarbonate. Sturdy, protective, stylish, comfortable and leightweight model (40g). Foreseen of a an adjustable nose bridge and Geco-injected temples, which fits perfectly all faces thanks to its shape-memory material. With Platinum coating: This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd / m²), to the most aggressive chemicals and delays fogging. Fits over most prescription glasses.
Knitted cut resistant glove (long cuff 13 cm) with a new foam nitrile coating with touch screen functionality. The lining consists of high cut-resistant PE fibers, nylon and Spandex. The nitrile coating (on the palm) provides an extremely good grip on dry, but also on wet and oiled surfaces. Very comfortable and excellent protection against abrasion and with an extra reinforcement between thumb and index finger. Also provides protection against contact heat up to 100 ° C. Application: glass industry, metal assembly, injection molding of plastics. Available sizes: 7-12. Conforms to: EN388: 4.X.4.3.D and EN407: X.1.X.X.X.X.
Terylene suspension with ratchet <(>&<)> Drytec sweatband, suitable for Centurion Concept, Spectrum, Vision Plus and Nexus Core.
Coverall, Tyvek, breathable, resistant to water-based chemicals, back side made of breathable material, antistatic, does not pill, elastichood, elastic at ankles and wrists, Tyvek zip closure with flap.Available in: white.
ABEK2HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling poin t >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %. S uitable for: processes involving chemical risks. Weight: 370g.
T-shirt, 100% pre-shrunk ring spun cotton, 145 gr./m², single jersey, short sleeves, round collar. Available in: white, black, navy, red, natural, sand, beer brown, yellow, gold, apricots, orange, fuchsia, purple, burgundy, deep red, sky blue, azure, turquoise, atoll, royal blue, blue jeans, light blue navy , kelly green, bottle green, khaki, gray ash, sport gray, dark gray, real turquoise, used yellow, used raspberry, used violet, used wasabi, mint green, pistachio.
Electric insulating boot with epoxy coated steel 200J toecap. Foreseen with a rubber vulcanised outsole (fuel and oil resistant), antislip and tested against 35 KV, energy absorbing heel. Every boot is tested to 25 KV before leaving the factory. This boot is 100% waterresistant and adjustable in height. Easy to pull out through the 'hands free removal'. Needs to be retested every year. Resitance to hot contact 60 seconds 300°C. Liner in polyester, washable insole. Sizes: 35(uk3)/50(uk15).
Sturdy puncture resistant glove with 8 layers of metal fabric in the palm and 4 layers on the underside of the fingers and over the fingertips. The top of the fingers and knuckles are also reinforced.
J-Energy series. Low shoe in waterresistant black nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Low shoe in water-repellent Perwanger leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inside lining in breathable GEOX textile and active carbon activated antibacterial insole. Insole EVA+TPU. Sole: Nitrile, resistant to 300°C. Sizes: 35-48.
High shoe in microfiber/Cordura, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Scuffcap and BOA closing system. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Apron, Tyvek, antistatic, with chestpiece, two cords on the back to fasten, length 108 cm. Available color: white. Sizes: universal size.
Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.
Chemical resistant glove, blue colour, thickness 0.45 mm, length 30 cm. Made of flocked natural rubber, 100% latex. Suitable for automotive assembly, light assembly, chemical industry, refineries, pharmaceutical industry, cleaning and maintenance. Sizes: 6,5/7-9,5-10.
Safety helmet made of polyester resin with fibreglass reinforcement. Lightweight: +/- 370 g. Heat resistant to +/- 400 °C. textile h eadband. Plastic sweatband at front. Colours: white and yellow. Headband adjustable with ratchet.
Bodywarmer ripstop, 100% polyester with PVC coating, waterproof, inside: 100% polyester wadding 180 g / m², retro reflective accent, zip with press studs, straight collar, microfleece lined 280 g / m².
Raincoat FR/AS, 50% Polyamide, 50% Polyurethane, 170 gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zipper at the bottom storm flap with press stud fastening, adjustable sleeves with press stud fastening, 2 straight pockets. Complies with: EN 343 3.1., EN ISO 14116 index 1, EN 1149-5.
The Stability Pro Plus insole gives extra pronation, extra support on the inside of the foot and has a central footrest (for dropped front foot). This insole gives optimal support to the heel and middle foot. It absorbs excessive perspiration moisture and promotes optimal fit due to lateral support to the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. X-Static is thermodynamic, eliminating excess heat and preventing blistering.
