BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Sweatvest Fleece Luxe has a contemporary fitted fit. This product is finished at the bottom and at the end of the sleeves with elastic tape that ensures that the garment fits perfectly around the body. Also, at the bottom of the sleeves a thumb hole is made so you can let your sleeves fit around the palm of your hands. That gives an extra protection against wind and cold. Handy pockets on the outside as well as on the inside of the Sweatvest ensure that you can carry all your essentials with you, such as phone, cards and keys. Fabric: 100% polyester, Microfleece, 280 g / m². Available colors: Red, royal blue, navy, black and gray. Available sizes: XS-7XL.
Black fitover safety glasses with pressure-free fit and hinge (foldable). Very light, fits over most prescription glasses. Frame in synthetic material and CBR65 polycarbonate lenses with integrated side shields. The innovativetemple concept makes use of Uvex X-stream technology for an excellent, non-slip fit and a wide range of applications. Protects against dust and chemical spatters. With Supravision Excellence coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Suitable for work in ATEX environments only in combination with Hazmax ESD boots. Sizes: S - XXL.
Low shoe with upper in hydrofugated, breathable, abrasion resisitant fabric (PES + Microfiber) Fitted with a Gore-tex liner. VIBRAM Outsole, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-48.
Low shoe glove in water repellent black Matryx multi-fibre. With an aluminium 200J toecap and a synthetic anti-perforation sole. Equipped with TPU heel reinforcement. Inner lining in breathable textile and insole in polyurethane foam. Sole in PU/Nitrile, resistant to 300°C. Sizes: 35-48.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with a Scotchguard coating. Marking: 2C-1.2 1 FT KN.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Fluo yellow/Grey and fluo yellow/navy. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
The Melfi looks like a simple navy blue sweater with long sleeves, but it protects you against industrial hazards such as arc flash, heat, flame, and flame spread. This sweater with arc protection has a round neckline and elastic hem and wrist bands. Simple but effective. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Navy. Complies with: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (17.8 cal / cm²), EN ISO 14116.
Tunic, tencel / polyester, 195 gr./m², height 72 cm and short sleeves. Available sizes: 0-6. Available colors: Black / gray, gray / black and blue / black.
This fully certified combat trouser in a contrast navy colourway has a multitude of clever features. The predominantly Navy colourway ensures that your trousers look great and keep clean for longer. Durable polyester/cotton fabric with Texpel stain resistant finish 50+ UPF rated fabric to block 98% of UV rays Reflective tape for increased visibility 8 pockets for ample storage Phone pocket Rule pocket D-ring for keys or ID cards Elasticated back waist for a secure fit Certified to EN ISO 20471 after 50x washes CE certified Two back patch pockets Side access pockets Contrast colouring for added style Premium stain resistant finish repels oil, water and grime Triple-stitched seams for extra durability Twin-stitched seams for extra durability. Quality: 65% polyester / 35% cotton. Available sizes: S-2XL. Available colors: Fluo yellow / navy, fluo orange / navy. Complies with: EN ISO 20471 class 1.
Hat in 100% merino wool. Ideal for work with low to moderate physical effort. Quality: 100% merino wool, 300g / m². Available sizes: universal. Available colors: Black, navy and green.
Round neck sweatshirt, double fabric, ribbed cuffs and hem at the bottom. Quality: 60% cotton, 40% polyester, 260 g / m2. Available sizes: XS-4XL. Available colors: Navy, sky blue, red, black, forest green and gray.
Low shoe in waterresistant nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Flame Retardant Coverall: Guaranteed flame retardant throughout its life Yellow / Silver reflex to be clearly visible Premium flame retardant reflective striping Double layer reinforced knee protection for increased strength and durability Double stitched seams for more durability UPF 50+ fabric blocks 98% of UV radiation 3 storage pockets Two-way zipper for quick and easy opening Thigh pockets Fabric: Bizflame Plus. 280g. Standards: EN 1149 -5 EN ISO 11612 A1 + A2, B1, C1 EN 15614 Available colors: Navy. Available sizes: S-2XL.
100% polyester (420D) with waterproof PVC lining large main compartment Two pockets at the ends Large front pocket Reflective stripes on three sides Reinforced handles with Velcro Adjustable shoulder strap Content: 75 liters Dimensions: 68 x 35 x 32 cm Maximum embroidery: 14, 15, 20 round hoop Pressure surface: 35 x 20 cm, 28 x 22 cm, 38 x 32 cm Available sizes: Universal. Available colors: Navy and black.
Besto life jacket Inflatable Pro 300N (automatically inflatable), suitable for all waters and all conditions such as extreme weather, when wearing heavy protective waterproof clothing. The vest is still safe in the event of unconsciousness and will turn you with the airways clear of the water. Includes reflective striping and viewing windows for visual inspection. Available colors: Fluo yellow / gray. Buoyancy: 300N Conforms to: ISO 12402-2, 275N.
Beannie for wet weather conditions. This hat has a 100% membrane for perfect protection but is breathable at the same time. The micro fleece lining provides warmth and comfort. Quality: Outer fabric: 100% Acrylic, Knitted 1g. Lining of the fabric: Insulatex Lined 40g. Extra information about the contrast fabric: Porelle Membrane. Available sizes: Universal. Available colors: Navy, black and fluorescent yellow.
Hi-vis coverall Macas with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo yellow/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Gray flame-retardant PU coating on 1 side, for strength and slip resistance. For light welding and grinding work. Vertical use. Free of asbestos. Short-term temperature resistance up to 600°C. Approved according to EN13501-1.
Made from durable polyethylene. Certified according to the latest IMO and SOLAS standards. Diameter 75 cm, Weight 4.5 kg. Cord 30m available (art. 1032349).
Made from durable polyethylene. Certified according to the latest IMO and SOLAS standards. Diameter 75 cm, Weight 2.5 kg. Cord 30m available (art. 1032349).
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
Light hearing protector made of a combination of plastic and stainless steel. Very light model with ergonomic design with sealing filled with fluid and foam.
Hi-Vis work trousers with stretch for a perfect fit, high comfort and freedom of movement. Reinforced fly and stretch in the crotch area. Quality: 54% cotton / 46% polyester, 260 g/m². Available sizes: 84-120, 44-64. Available colours: Fluo yellow/navy and fluorescent orange/navy. Complies with: EN ISO 20471 class 1.
Head protection, large, for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01
Low shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Put togehter with pre filter SR221 on gas, particle, or combined filter. Use also for fit test.
Multinorm ladies' softshell Heika with arc protection: Straight collar; Zip closure under flap; 2 inset pockets; 2 loops for gas detectors; Round sleeves; Sleeve narrowing; Elongated back tail; Flame retardant reflective segmented striping (50mm). Quality: 3-layer softshell: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: XS-2XL. Available colors: Fluo orange/navy and fluo yellow/navy. Compliant with: IEC 61482-2 : 2018 APC1 - ATPV 24,3 cal/cm², EN ISO 11612 : 2015 / A1 B1 C2 F1, EN ISO 14116 : 2015 / IND.3, EN ISO 11611 : 2015 / Class 2 - A1, EN 1149-5 : 2018, EN 13034 : 2005 + A1 : 2009 Type PB [6], EN ISO 20471 : 2013 +A1 2016 / Class 2 and EN 14058 : 2017 / Class 1 3 x x.
Women's Casma trousers with ARC protection: Closure with 1 hidden button / Front fly with zipper 2 inset pockets with flap and press stud fastening 1 ruler pocket with flap closed by hidden press studs elastic waist knee pockets Waistband with belt loops Double stitched (2x2) flame retardant reflective striping (50mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56. Available colors: Navy. In accordance with: IEC 61482-2: 2009 Class 1- ATPV 15.2 cal/cm², EN ISO 11612: 2015 / A1A2B1C1E3F1, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: 2005 + A1 : 2009 Type PB [6].
Low shoe in Safety Knit® textile. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. BreathActive lining. Outsole in PU/Nitrile, resistant to 300 ° C. Removable, polyurethane insole with textile layer. Sizes: 39-47.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
High shoe in Putek® PLUS (68% recycled polyester), with a non metallic antiperforation sole (50% recycled polyester) and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF BioMass Balance (100% renewable sources), SRC antislip, oil and carburant resistant. Removable perforated insole Maxi-Soft Duo Green composed of a layer of PU Dynamic from BASF® with thermosensitive shape memory and a layer of BASF® BioMass Balance Elastopan, this improves weight distribution, reduces pressure points and absorbs and relieves stress on the body when standing for long periods and walks. 100% metalfree. Sizes: 35-48.
Flame retardant and anti-static hi-vis waistcoat: V-neck; Zip closure; Without sleeves; Flame retardant reflective tape (50mm); Back length 70 cm. Quality: 98% polyester + 2% AST; ± 120 g/m². Available sizes: S-3XL. Available colours: Fluo yellow and fluo orange.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
High shoe in hydrofugated nubuck leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a Gore-Tex liner. BOA closing system. Has BIOMEX-PROTECTION-support for stabilizing the ankle. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
This premium quality welding trouser is made from split cowhide leather and stitched with para-aramid thread. It offers enhanced protection to the wearer when welding and is designed to last in the toughest environments. Made with cowhide leather for a premium finish Class 2 welding protection Button front closure Wider belt loops for wider belts Designed to be worn in a tough work environment CE certified UKCA marked Shell Fabric : Split Cowhide Leather, thickness 1.3 mm Available sizes: S - 3XL
Black safety boot in PVC, fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC. Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Sizes: 35-50.
Comfortable, transparent goggles that fit over most prescription glasses.
Backpack to carry the motor unit Versaflo TR-300, TR-600 and TR-800 comfortly on the back. Easy to clean and adjust.
P1 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M h alf and full face masks when used with filter holder 603 and dust filter holder 501. Protects against irritating dust, mist and smok e particles.
Safety helmet with micro peak and integrated arc visor, made of strong ABS for improved low temperature (-40°) and side impact protection. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
Empty first aid kit box made of impact resistant ABS plastic. Domino(270 x 190 x 115 mm) for maximum 10 people. Suitable for all commercial buildings. Including wall mount.
Red First aid pouch with basic first aid equipment for on-the-go. Content: quick bandage 7x10cm, wound quick bandage, adhesive plaster, wound plaster, Cambric bandage, elastic hydrophilic dressing, gauze pads 5/5cm, dressing wadding, splinter tweezers, pocket scissors, disinfectant wipes, safety pins, Burnshield blots. Dimensions: 22 x 14 cm.
Proflex knee support with reinforced nylon shell for protection against perforation. The knee support is filled with a gel for bette r comfort and support. The Proflex is cut resistant, abrasion resistant and has a non-slip surface for better grip on the work surfa ce. Sizes: universal size.
Liquid-tight glove in jersey with high-quality neoprene coating, 45.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. Hence the great demand for this glove from the chemical and petroleum industry, the transport sector and companies that work with hazardous substances.
Green compressed air hose, 10 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
P2 dust filter from 3M for direct connection to 3M half and full-face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter!
1200 ml refills for Purell TFX Foam dispenser. Foam: 2000 washings. Authorisation number Belgium : BE-REG-00965 Authorisation number France: 38727 Use biocides safely. Always read the label and product information before use
Disinfectant fluid for responsible cleaning of rubber masks, medical equipment and plastic or metal parts. Disinfect for 15 minutes with a 1% solution of this product. Desinfecto kills bacteria and mildew, deactivates viruses, is non-flammable and biodegradable. B ottle containing 1 litres, pH value 6.7.
Soap- and alkaline-free liquid for responsible cleaning of rubber masks, medical equipment, parts of compressed air equipment, prote ctive clothing, etc. Clean is a slightly viscous mixture of anionic surfactants, corrosion protectors, inhibitors, additives and fix atives, water and NaOH, with a pH value of 7. Completely biodegradable, non-flammable and does not irritate skin or mucous membranes . Use a 0.5-1% or 1%-3% solution, depending on the materials to be cleaned. For manual cleaning.
Refill for first aid panel: wound cleaning wipes (3227).
Dust-proof, impact resistant first aid kit made of ABS plastic, specifically for the Belgian market. Multi dimensions: 445 x 320 x 150 mm, for more than 20 people (industry 3). Includes wall mount and content. Additional refills available.
Hazardous electrical voltage. Hazard warning sign in self-adhesive polyester. 1 pictogram. Dimensions: 200mm.
Fire extinguisher. Fire action sign in polypropylene. Dimensions: 200x200mm.
Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51 cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. Absorption capacity: 16 litres.
Post and cement base red/white, height 90cm. Chains and ribbons can be attached to control foot traffic.
Hearing protection required. Mandatory sign in self-adhesive polyester. Diameter: 200mm.
REAKTORP3 screw-on filter DIN 148 in aluminium housing. Protects against radioactive iodine, plus highly toxic dust, mist and smoke particles. For use in combination with half and full face masks with standard threads. Weight: 260g.
Standard casing for hand wheel valves. Not PPE.
Mandatory sign - Safety gloves mandatory in self-adhesive polyester. Dimensions diameter: 100mm. Not PPE.
Rescue sign - First aid in self-adhesive polyester. Dimensions: 200*200mm. Not PPE.
Face screen in blank polycarbonate, thickness: 1,5mmm, lenght 170mm. Possible combination with the Anti Electric Arc Browguard S89CAEA or the face screen carrier S57CEAEA and Chin guard S91C. Packaging: 10 pieces.
Prinzing locking system for ball valves in red polypropylene. Two halves enclose the handle of the ball valve so that it cannot be opened or closed accidentally. Not PPE.