BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
High shoe in waterresistant oiled leather, with a steel antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Helmet hearing protector Sana 34 for safety helmet CENTURION.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
High shoe safety shoe S3 in black full grain leather with uvex waterstop technology. 200J synthetic toecap, steel anti-perforation sole and scuffcap. Fitted with a breathable textile lining. Padded tongue and removable, antistatic insole, moisture absorbent. Sole made of PU/PU: suple and lightweight, oil and petrol resistant, slipresistant. Sizes: 35-52 (10, 11, 12).
waistcoat Ronet: Long Sleeves; V-neckline; Velcro closure; Back length 76 cm (L). Complies with: EN ISO 20471 class 3.
Long coat 4131 with concealed press stud fastening, 2 inset side pockets, inner pocket, waistband on the back, pleats at the back, split, sleeves with press studs. Quality: 65%/35%, cotton/polyester, 2/1 twill weave, 245gr/m² Available sizes: 38-74 HAV Available colours: White.
Welding cap with elastic back. Quality: Cantex 1210, 350 g/m².
Safety helmet made out of ABS with integrated visor. Has a 6-point textile cradle (53-64cm). Available in: white.
PFAS free and inherently flame retardant work jacket in Cantex Weld on the front and sleeves, and Cantex Weld/Cantex Weld Stretch on the back. Available sizes: XS-4XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
High quality dispenser with cleaning tissues, microfibre (B401) and cleaning spray (B402).
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Solution for users looking for a glove that keeps hands warm and dry, protects them from contact heat, and offers high protection against cuts.
The X-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate recyclable bag.
The uvex Spiderneck neck support improves the weight distribution of the helmet due to the large contact area, which increases wearing comfort. In addition, mounting is very easy by screwing via the rotary knob. No PPE.
Low shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
The Frovik is a bomber jacket which you can wear in many situations. The fluorescent colour and segmented striping will keep you safe in any light conditions. The Siopor Excell fabric protects you against the rain and against many industrial hazards including the thermal risks of an electrical flashover. A surplus is the light weight of the fabric. The bomber jacket comes with a flame retardant fleece lining (index 3) which can also be removed. The wind is kept out by the elastic wrist bands that can be narrowed and by the standing collar to which a hood can be attached. The separately available hood can be stored in the special purpose inside pocket. Class 2 ARC protection can be obtained by combining the bomber jacket and the fleece lining.Complies with: IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5, EN 13034, EN ISO 20471, EN 343, EN 61482-2, EN ISO 14116 and EN 14058. Available sizes: S-3XL Available colours: Yellow-Navy, Orange-Navy
Safety glasses with orange/black frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. With foam and elastic headband. Polycarbonate lenses with an anti-scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes. Not supplied with glasses cord (can be ordered separately: 1034594).
Low shoe in Safety Knit® Green textile, made out of recycled PET-bottles and polyester fibres. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. Breathable, functional lining. Outsole in EVA/Nitrile, resistant to 300°C. Removable, polyurethane insole with textile layer. Sizes: 36-47.
TYVEK® IsoClean® sleeve option 00 (Bulk Packed) Bound seams. Covered elastic at both ends. 45 cm long. White. Available sizes: one size For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
Canvas protective bag made of 100% cotton for the storage of insulating gloves for electricians. Size: 14 inches.
Softshell vest without sleeves: • two zipped side pockets; • breast pocket with zip; • two inner pockets; • hidden button band with chin guard at the top; • adjustable waist. Including Aviko logo on the left chest (50cm²). Quality: 96% Polyester, 4% Spandex. Available sizes: XS - 5XL. Available colors: Navy.
With these new work trousers you can literally do anything! Fully 4-way stretch and extremely lightweight. The 4-way stretch work trousers have a contoured fit, which makes them extra comfortable. The hard-wearing Cordura® fabric reinforces the trousers on the thigh pockets and at the ends of the trouser legs. MATERIAL 4-Way Stretch 260 g/m² 90% polyamide / 10% elastane Available sizes: 42 - 66 Available colours: black
Self-rescuer, compact, lightweight and ergonomic. Can be worn on the body or mounted on the wall in a waterproof box. Is used to escape from a lack of oxygen, but also against toxic gases and particles and provides the user with oxygen for 15 minutes. Operation based on a small compressed air bottle which adds 02 to expired air. Delivery in orange storage box. Belt sold seperately as an accessory. 15-year life cycle.
Chemical protection gloves against hazardous chemicals. Resistant to acids, bases, solvents and alcohols. Reach compatible. Length: 38cm, thickness: 0.78mm.
High shoe S3 in waterresistant black full grain leather with uvex waterstop technology for protection against splashing water and 200J synthetic toe cap and steel antiperforation sole. Innovative uvex bionom x design creates a biomechanical symbiosis between the foot, the upper, the sole and the floor. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU (i-PUREnrj) with strong antislip values and very good shockabsorption. Free of phthalates and silicones. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 38-52.
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,LEL,H2S,CO, VOCs.
KneeBlades are designed for any job where you are required to be on your knees. The high-quality KneeBlades allow for more balance, flexibility, and mobility. The three-wheeled mobile base allows for full 360° turning capability, without lifting from the floor. Close to the ground knee roller design minimizes back stress. With the push of a button, you can go from Knee Blade to knee pad. - Tapered Gel Pad designed to evenly displace weight and lessen pressure on the knee, while fitting the contour of the knee; - Hook And Loop (One Strap) to secure the rolling knee pads comfortably with less tension on the back of your knee; - Durable, lightweight nylon for the most demanding projects Each blade weighs only 3.5 lbs KneeBlades Are Ideal For: Installing Tile Installing Wood Floors Installing Carpet Concrete <(>&<)> Masonry Work Painting Low Places Construction Work Auto Detailing <(>&<)> Maintenance Stocking Shelves Yard <(>&<)> Gardening Clean-Up
Professional Indoor Neyfik spray fire extinguisher class 5A / 21B / 5F. Very compact and effective extinguisher suitable for oil fires, other burning liquids and solids. The spray is supplied with a wall holder. Each spray extinguisher also contains a check schedule that, if desired, can be used to perform periodic checks. The spray extinguisher is completely maintenance-free and has a lifespan of 5 years. The spray is supplied with a wall holder. The spray can be combined with a vehicle holder (Art. 1045093). This model only contains a Dutch text including a control schedule. This model is also available with French text excluding control scheme (art. 1045090).
Sportive spectacles in clear polycarbonate. The uvex i-lite impresses with its flat lens geometry as well as its modern design. In addition, the ergonomically shaped arms with multi-stage tilt adjustment ensure an optimal fit without pressure points.The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Equipped with 2 textile rescue loops on top of the shoulder straps. Comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point. Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with quick release. Harness easy to put on. Built-in foot loops to prevent hanging trauma, fall indicator front and back.
Output for 3 persons / compressed air hoses to be installed on Aircare filter system.
Glass replacement lens for shot blasting helmet Panorama. Serves as the basic lens.
Foam vest Racing Belt with a buoyancy of 100N: High comfort, due to splitted frontal foam section • All sizes are equipped with a crotch strap Separate compartments in frontpanels for extra comfort Fabric: 100% Polyester High Size L PE foam
Facial screen carrier Arc Pro for helmets, in polyetherimide, to use in combination with the visors 225mm and 170mm for arc flash risks posed by electrical faults. Complete with Euro clips (S565) and Connect clips (S570) with Vabon sweatband. This system is fully tested to protect up to 40cal/cm2.
Belt for attaching hose to mask. In combination with hose with standard threaded connection, the filter can be worn on the hip to avoid high concentrations at filter input point during certain activities, e.g. opening a vat.
Protection against cuts and 360 ° around the forearm, combined with additional protection to the back of the hand. thumb manchette for better comfort. Elastic band behind the elbow with anti-slip rubber. Elastic material into two-way stretch for better comfort
Lanyard, 1,5 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Max user weight: 140kg.
Sweat band in synthetic leather for helmets Airwing and Pheos. Not certified seperatly as PPE.
Soft cotton spare sweatband for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. 3-piece packaging. No PPE.
High shoe in black textile composed of high tenacity polyamide. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in EVA/VIBRAM. Sizes: 35-50.
Lanyard, 2 metre length, 43mm width consisting of elastic strap with integratedshock absorber. Non-stretched length of the Lanyard is 1.2 metres, which enables better manipulation of the Lanyard. Fitted with 1 standard carabiner and 1 scaffholding carabiner. Serves as connection between anchor point and harness.
Neoprene rubber chemical jacket. The zipper has a double flap with Velcro, and the sleeves have a unique attachment system for glove s. The chemical jacket also has an extended collar. This jacket can be used in combination with the neoprene trousers. Available in: yellow. Sizes: S - XXL.
Neoprene rubber chemical overalls. The integrated hood is attached by an elastic strap. The diagonal zipper has a double flap with Velcro, and the sleeves have a double elastic closure. The pants' legs also have a double elastic closure and elastic straps under the sole of the foot. Available in: yellow. Sizes: M - XL.
Coverall, 100% polyester, 150gr./m², water repellent, thermal lining in 100% polyester 300gr./m²,insulating, elastic on the back side foroptimalwearing comfort, two large patched pockets with flap, one chestpocket with flap en ID-pocket, zipper under storm flap with velcro closure, reinforced knees and legs, zipper under flap with Velcro from knee to bottom, 1 horizontel retor-reflective striping on the chest, back end both legs. Available in: navy.
Waterproof outer with Fleece inner and High Visibility colour with reflective strips. Zip top fastening to be fitted to Fleece Helme t Liner. No PPE.
Orange first aid kit box made plastic. This A-model is
ATTENTION! Article is converted to 1006098 - case Toolpac A
High-quality neoprene cap glove with cotton lining. Length: 30 cm. Neox offers protection against a wide range of chemical products and has high mechanical resistance.
Liquid-proof gloves made of jersey coated with high-quality neoprene. High mechanical resistance and resistant to a wide range of ch emical products.
Protective film for safety goggles Ultravision 9301.
The Lite Com enables you to communicate with other Lite Com users within a 2 km radius. This allows you to place hands-free calls and talk to whomever you like, always in combination with the correct hearing protection. Ensures you can work efficiently.
Sporty goggles, derived from the successful Uvex ski goggles. Successor to the Ultravision 9301 PC. Very comfortable, good protective coverage thanks to the DCT technology. Using a specially designed clip (not included, Uvex ref. no. 9924.010/VDP: 1000249). Glasses with limited ventilation, can be combined with helmet and hearing protectors. Frame colour: grey/blue. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes Supravision Extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
Face shield Acetate Clear for use with face shield holder S89 or helmet face shield holder S54 CE, made of acetate.
Clear tri-acetate face shield (225 mm). Suitable for use on the Centurion Vulcan using the optional, ingeniously devised, multi-func tional face shield holder S57.
Sporty goggles, derived from the successful Uvex ski goggles. Successor to the Ultravision 9301 PC. Very comfortable, good protective coverage thanks to the DCT technology. Glasses with limited ventilation. Frame colour: orange/green. Fitted with grey PC lens: as with all Uvex PC lenses, the grey-tinted lenses also provide 100% protection against harmful UV radiation up to 400 nanometres. The grey tint also filters portions of the visible spectrum and therefore offers protection against blinding caused by intense sunlight, etc. The recognition of signal colours remains unimpeded. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Air supply system for use with compressed air line in combination with 3M half-face or full face masks. Also makes it possible to mo unt filters on half-face or full face masks for situations in which supply from compressed air line is cut off or for protection und er a decontamination shower. If no filters are mounted, overpressure valves C-340 must be installed (these are provided). Only appro ved in combination with air hoses C-251, C-252 and C-253. Fitted with air regulator for adjusting the flow rate. Not for use in conf ined spaces. Working pressure: between 3 and 7 bar. NPF with half-face mask: 50, NPF with full face mask: 200.
1200 ml Purell Advanced hygienic hand rub refills for Purell TFX dispenser. Gel: 1000 washings. Authorisation number Belgium : NOTIF778 Authorisation number Netherlands : 14329 Authorisation number France: 31328 Use biocides safely. Always read the label and product information before use
Antibac foam soap, 1200 ml refill (foam: 2000 washings). Authorisation number Belgium : NOTIF1014 Authorisation number France: 41562 Use biocides safely. Always read the label and product information before use
Escape hood on compressed air for very toxic conditions and/or places where can be a lack of oxygen. The escape mask consists of a hood with an integrated rubber half-mask. The bag contains a 3 litre, 200 bar metal filled air cylinder. As soon as the bag is opened, the breathing air is automatically activated. While wearing the mask, the user sees a continual indication of the amount of escape time that remains. Bag can be used to carry escape set while it is closed or opened. Working time: at least 15 minutes. Weight: 6 kg. Flow rate: approx. 35 l/min.
Air cooler with neoprene cover on belt for use in combination with 3M airhoods with bayonet coupling. With regulator to adjust the airflow and temperature in the air hood. Can cool air a maximum of 28 °C. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 4 - 8 bar. Minimum airflow 170 l/min, max. 500 l/min.
High-pressure pressure reducer for 200 and 300 bar compressed air cylinders with one manometer that indicates the pressure in the ai r cylinder and another manometer that indicates the pressure in the connected compressed air line. Includes a whistle signal that wa rns when the cylinder is almost empty. Ideal for monitoring a 50-litre compressed air cylinder that can serve as an air supply or as an air buffer when using compressed air equipment. Pressure reducer with one connection for compressed air hose with straight CEJN coupling.
1 rubber tourniquet 5 cm, 1 aromatic ammonia capsule, 1 pair Lister bandage scissors 14 cm, 2 compresses 7 x 10 cm, 1 triangular Calico bandage, 1 Cambric bandages (light) in cellophane 5 cm x 5 m, 2 Cambric bandages (light) in cellophane 7.5 cm x 5m, 2 boxes compressed absorbent wadding 20g, 1 Stella Fix skin-coloured 1.25 cm x 5 m, 1 Stella Fix skin-coloured 2.5 cm x 5 m, 1 box Stella Plast 6 cm x 1 m, 2 bottles Stellachrome B 20 ml, 10 safety pins in a bag, 1 first aid instruction sheet (official text), 1 list of contents and part numbers for the products.
First aid. Rescue sign in polypropylene. Dimensions: 200x200 mm.
Fire hose. Fire action sign in self-adhesive polyester. Dimensions: 200x200mm.
Fire alarm. Fire action sign in polypropylene. Dimensions: 200x200mm.
Spill kit in a UV resistant, sturdy package for one-time use. Ideal for small quantities of leaked liquid. Content: 15 pads (38 x 48 cm), 3 socks (7.6 x 122 cm), 1 pair of safety glasses, 1 pair of gloves and 1 disposal bag. Absorption capacity: 97 litres. Suitabl e for: general industrial use.
Anti-static absorption mat measuring 91 cm x 30,48 m. This medium-weightabsorption mat is available by the roll. The absorption mat absorbs oil, water and non-aggressive chemicals. The impermeable anti-slip bottom layer prevents the penetration of liquids, slipping, curling and buckling. Absorption capacity: 77 litres for 1 roll.
Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51 cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. Absorption capacity: 18 litres.
Hearing protection required. Mandatory sign in polypropylene. Diameter: 200mm.