AUTOSAVER SSR 30/100

Brand : MSA
Prod. No. 1002585

Oxygen producing self-rescue set with mouthpiece and nose bridge, for very hazardous circumstances and/or places where a lack of oxy gen may develop. Stored in a hermetically sealed, stainless steel carry bag with belt loops. Works using an oxygen generating KO2 ce ll that can be replaced once it is used. KO2 cell is activated by first exhalation, responds to moisture and CO2 in exhaled air. Ver y maintenance-friendly, only requires annual test of seal. Working time: at least 30 minutes at consumption of 30 l/min. (escape), 1 00 minutes at consumption of 10 l/min. (rest). Shelf life: ten years. Weight: 2 kg.

Quantity
Price/pieces: € 1830.00

Contact us:

Vandeputte Safety
How to protect yourself when handling silicon?

How to protect yourself when handling silicon?

01-09-2023
Find out about the hazards involved in handling silicon and the essential role of breathing protection to prevent silicosis.

Details

  • Brand
    MSA
    MSA
  • UNSPSC
    46182000
  • Catalogues
  • Escape time
    • <= 30 min
  • Properties
    • With oxygen cartridge
    • EVACUATION
  • EN 13794

Product numbers

Prod. no. Name
1002585 AUTOSAVER SSR 30/100

Respiratory protection

Gases, toxic fumes, oxygen deficiency, dust particles, and mists are not always immediately detectable, although they can be life-threatening. Therefore, it is very important to get advice from an expert when you suspect that there may be a risk to the respiratory tract.

This risk, together with the work to be carried out, will determine whether you can work with environment-dependent respiratory protection such as dust masks or half and full-face masks, motor units, etc.

When it is not possible to filter the air present, it is better to opt for environmental-independent breathing protection.  These can be air caps or masks that are connected to the compressed air network. When you need to be sufficiently mobile, it is better to opt for a self-contained system such as a compressed air device or an escape mask.

It is also important to know in advance which substance to ‘filter out’ and how much of it.
If that is the case, calculate the Nominal Protection Factor (NPF) and use it to select the right mask with filter.  Don’t know which it is in advance? Then you’ll need to opt for the ‘ABEK’ filters.

You will find all leading brands in our range: MSA, 3M, Moldex, Bartels, PureFlo, Honeywell, Genano, Scott, Avon, Spasciani, rsg safety, etc.

Did you find the right product?  Then it’s important to check that it fits your face. We do this at Vandeputte by means of a Fit test.

Lastly, you can also contact us for the periodic maintenance of your respiratory protection: refilling compressed air bottles, cleaning and maintaining full-face masks, maintaining and repairing lung vents and breathing apparatus, etc.

.

Alternatieven

MSA
Prod. No. 1002586