VORTEX V-100 COOLER WITH BELT
Brand : 3M
Prod. No. 1002435
Air cooler with neoprene cover on belt for use in combination with 3M airhoods with bayonet coupling. With regulator to adjust the airflow and temperature in the air hood. Can cool air a maximum of 28 °C. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 4 - 8 bar. Minimum airflow 170 l/min, max. 500 l/min.
Details
-
Brand
-
UNSPSC46182000
-
Catalogues
-
Cooling/warming
- Yes
-
- WORKING ON COMPRESSED AIR NETWORK
-
EN 1835
-
EN 270
Product numbers
Documents
Respiratory protection
Gases, toxic fumes, oxygen deficiency, dust particles, and mists are not always immediately detectable, although they can be life-threatening. Therefore, it is very important to get advice from an expert when you suspect that there may be a risk to the respiratory tract.
This risk, together with the work to be carried out, will determine whether you can work with environment-dependent respiratory protection such as dust masks or half and full-face masks, motor units, etc.
When it is not possible to filter the air present, it is better to opt for environmental-independent breathing protection. These can be air caps or masks that are connected to the compressed air network. When you need to be sufficiently mobile, it is better to opt for a self-contained system such as a compressed air device or an escape mask.
It is also important to know in advance which substance to ‘filter out’ and how much of it.
If that is the case, calculate the Nominal Protection Factor (NPF) and use it to select the right mask with filter. Don’t know which it is in advance? Then you’ll need to opt for the ‘ABEK’ filters.
You will find all leading brands in our range: MSA, 3M, Moldex, Bartels, PureFlo, Honeywell, Genano, Scott, Avon, Spasciani, rsg safety, etc.
Did you find the right product? Then it’s important to check that it fits your face. We do this at Vandeputte by means of a Fit test.
Lastly, you can also contact us for the periodic maintenance of your respiratory protection: refilling compressed air bottles, cleaning and maintaining full-face masks, maintaining and repairing lung vents and breathing apparatus, etc.
.