BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
2-LAYER THERMAL MOUTHPIECE – Attaches to all N-Ferno® Winter Liners (sold separately) with hook and loop attachment straps for full-face coverage. WATER-RESISTANT OUTER SHELL – Breathable 1mm neoprene construction to trap heat in. WARM LINING – Soft fleece for additional comfort Machine Washable.
Bizflame multinorm trousers with arc flash protection: 100% Metal Free; Flame retardant Industrial washable striping; Knee pockets; 8 storage pockets. Quality: Bizflame Ultra 340g. Available sizes: 28-46 PW. Available colors: Navy and Orange. Conforms to: EN ISO 11612 A1 + A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1 + A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 Class 1 and EN 13034 Type PB [6 ].
Atex charger including mains charger to Twig Atex USB cable for charging the Twig One atex devices. Attention: Charging in an ATEX zone is not allowed.!!
Coverall with hood, elastic face opening and chin flap for a tight fit around the breathing mask, stitched and taped seams, double adhesive zip, double zip and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle-tight fabric, excellent barrier against a wide range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Anti-static treatment (inside). Includes non-dissipative gloves and dissipative socks. Available sizes: S-3XL. Available colors: gray. In accordance with: EN 1073-2: 2002, EN14605: 2005 + A1: 2009 (Type 3/4), EN ISO 13982-1: 2004 + A1: 2010 (Type 5), EN 13034: 2005 + A1: 2009 ( type 6), EN14126: 2003 and EN 1149-5: 2008.
With a silicone rubber coating on both sides. Resistant to a very high mechanical load, thermal and electrical influences. Resistant to most acids and alkalis, dirt and oil repellent, good electrical insulating properties. Contains no asbestos. Short-term temperature resistance up to 600°C.
Medium duty impact glove with slip-on cuff and double-layer palm made of cut-resistant synthetic leather. TPR impact protection with ANSI / ISEA 138 score 2. Reinforcement around the index finger to protect abrasion-sensitive areas. Highly visible for extra safety. Sizes: 6-13. Conforms to: EN388: 2016 3.X.4.3.E.P
Chemical resistant PVC glove with impact and cut protection. TPR impact protection on top of the hand and full length of fingers. PVC coating for waterproof and chemical resistance. Inside liner provides all round 360 degree cut resistance. Durable textured palm coating for enhanced grip. Sizes: 8,10 and 12.
Tactial cut protection glove for universal interventions, with excellent dexterity on the 'trigger' finger, touch screen function, padding on the palm, and silicone dots for an excellent grip. With extra choc protection on the back of the hand. Sizes: 6-11.
The FCT helmet is designed to give maximum protection for the training. However, the head is never a target area in close combat training. The maximum opening on the cage is 15 mm in the front of the cage. There is a double locking with velcros on the back of the helmet. On the ear area there are two holes. Outside material: nylon with PU outer surface; plastics: 1,5mm HDPE.
High shoe in mesh/nubuck leather with a synthetic antiperforation sole. Fitted with a mesh and textile liner. EVA/rubber outsole with scuffcap, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-50.
Long ladies underpants without label. Quality: 50% polyester, 50% Viscose, knitted interlock, 205 gr / m² Available sizes: XS - 4XL. Available color: White.
Ladies' long-sleeved t-shirt without label. Quality: 50% polyester, 50% Viscose, knitted interlock, 205 gr / m² Available sizes: XS-4XL. Available color: White.
Ladies' T-shirt with short sleeves without label. Quality: 50% polyester, 50% Viscose, knitted interlock, 205 gr / m² Available sizes: XS-4XL. Available color: White.
T-shirt men with short sleeves without label. Quality: 50% polyester, 50% Viscose, knitted interlock, 205 gr / m² Available sizes: XS-4XL. Available color: White.
Ballistic goggle with panoramic view. With clear polycarbonate lens with anti scratch and antifog coating. Equipped with an adjustable elastic strap, so the soft mount properly to fits the face.
Chin strap 2-point for helmet H700 and H701.
Multinorm parka Beltrum with arc protection: Straight collar; YKK zip closure under flap; 1 inset chest pocket with flap; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket; Round sleeves; Sleeve narrowing; Elastic drawstring in front hem; Elongated back tail. Quality: 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available sizes: S-53XL. Avialable colors: Fluo orange.
Lightweight welding safety glasses in polycarbonate with Pressure Difffusion Temple technology for perfect and secure fit. This glasses have very good colour recognition, Scotchgard anti-fog coating, a large field of view and brings resistance to UV-rays.
For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series. These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.
The 100 Series offers a popular sporty lens design, adding a fresh look to the SecureFit family of safety glasses. These lightweight safety glasses feature 3M’s innovative temple design with slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. In addition, SecureFit 100 Series flat and flexible temple design combines well with 3M™ Protective Earmuffs.
Glove with impact and cut protection that keeps hands warm and dry. TPR impact protection on top of the hand and over the entire length of the fingers. 70gr Thinsulate™ insulation for extra warmth, the patented waterproof barrier keeps hands dry. Features PVC patches on the palm for extra grip, and an extra layer on the palm provides extra cut resistance. The extended cuff with gaiter closure keeps the dirt out and has reflective bands for extra visibility. The tips of the index, middle finger and thumb are suitable for use with touch screens. Sizes: 8-12. Complies with : EN388:2016 3.X4.4.F.P, EN511:1.2.1
Hi-vis Bermuda shorts with concealed zip, 2 inset spacious side pockets with additional inset pocket, 1 of which can be closed with a zipper, 2 spacious back pockets, loose-hanging ruler pocket with 2 additional pockets, spacious, loose-hanging thigh pocket with flap and press stud with additional storage options, elastic in the back, 1 D-ring for badge holder, reflective band, reflective piping. Quality: 60%/40% | polyester/cotton | 4/1 satin weave | 290gr/m². Available sizes: 44-66 HAV Available colours: Fluo yellow/navy, fluo orange/navy and fluo red/grey. Complies with: EN ISO 20471 class 1.
The polo sweater bicolor with breast pocket for ladies from the Tricorp Workwear label is a popular item. This durable two-tone polo sweater is shape and colorfast thanks to the combination of cotton and polyester. Thanks to an elastic hem at the bottom, it protects better against wind than other similar sweaters, the inside is roughened for extra comfort while wearing. Fabric: 60% cotton / 40% polyester, American fleece, 280 g / m². Available colors: navy, black / gray, black / red, black / orange and black / green. Available sizes: XS-3XL.
This polo sweater offers a solution during the colder days of the year when a polo shirt is just a bit too cold. The article is particularly shape and colorfast. The inside is roughened for extra comfort. The polo sweater is a straight model with side slits and a 3 button closure. Quality: 60% cotton / 40% polyester, American fleece, 280 g / m². Available sizes: XS-3XL. Available colors: Red, wine, gray anthracite, gray melange, navy, royal blue, bottle green, black, white, lime and dark gray.
Sleeves in heavy PU quality, 50% Polyester, 50% Polyurethane, 240 g / m², Oil and cold resistant, Wind and waterproof. Sizes: Universal. Colour White. Conforms to: EN 343 3: 1, EN1186 and EN13034.
RWS jacket Hantum with: Lay-flat collar Closure with hidden press studs under flap 2 patched chest pockets with flap closed by concealed press studs 2 patched pockets with flap closed by concealed press studs 1 pen pocket Round inset sleeves Sleeve narrowing by press studs Extended back Double stiched (2x2) reflective striping. Quality: Polyester 70% / cotton 30%; ± 235 g/m². Available sizes: 44-64 EU. Available colours: Fluo orange.
RWS rain overall Welten with: Turn-over collar Hidden press stud fastening under seam 2 patched chest pockets with flap with concealed press stud fastening 2 patched pockets with reinforcement 1 patched thigh pocket with reinforcement and with flap with concealed press stud fastening 1 patched back pocket with flap and concealed snap button closure 1 ruler pocket with reinforcement 1 pencil case 2 through slots with concealed press stud fastening Round inset sleeves Sleeve narrowing by means of snaps Knee pockets Double stitched (2x2) reflective stripes (50mm). Quality: Polyester 70% / Cotton 30%; ± 235 g / m². Available sizes: 44-64 EU. Available colors: Fluo orange. Conform: EN ISO 20471 class 3.
Overall Warwick ARC with: Upright collar Zipper with flap and hidden press studs 2 patched chest pockets with flap with concealed press stud fastening 2 patched side pockets with flap with concealed press stud fastening 2 loops for gas detectors 1 ruler pocket with flap and concealed snap button closure 1 back pocket with flap and concealed press stud fastening 1 patched thigh pocket with flap and concealed press stud fastening 2 piercing slots Round inset sleeves Sleeve narrowing by means of snaps Knee pockets Double stitched (2x2) flame retardant reflective stripes (50mm). Quality: 57% aramid + 42% polyester + 1% AST; ± 260 g / m². Available sizes: 44-64 EU. Available colors: Fluo Orange. Conform: IEC 61482-2 class 1 - ATPV 8.0 cal / cm², EN ISO 11612 A1 B1 C1 F1, EN ISO 14116, EN ISO 11611 class 1, EN 1149-5, EN 13034 Type 6 and EN ISO 20471 class 3.
Hi-vis polo shirt with a beautiful collar in a contrasting dark gray color and elastic reflective bands. Quality: 100% polyester (birds eye); ± 140 g / m². Available colors: Fluo orange. Available sizes: S-3XL. Conform: EN ISO 20471 class 3.
Gray flame-retardant PU coating on 2 sides, for strength and slip resistance. For light welding and grinding work. Horizontal use. Free of asbestos. Short-term temperature resistance up to 900°C. Approved according to EN13501-1.
With a silicone rubber coating on both sides. Resistant to a very high mechanical load, thermal and electrical influences. Resistant to most acids and alkalis, dirt and oil repellent, good electrical insulating properties. Free of asbestos. Short-term temperature resistance up to 600°C
Front for the 3M ™ Speedglas ™ automatic welding mask G5-02. Replaces the original if it is worn or damaged.
The world's first curved auto darkening filter - especially for TIG welding! Until now, automatic blackout filters have always been flat. If you wanted a larger field of vision, you needed a larger helmet with plenty of room for it. Because the curved cassette is around the face, it is possible to fit a large field of view (150mm x 76mm) in a very slim mask. Light level 2.5, dark levels 8-12. Equipped with natural color technology for high-contrast vision.
Attachment set for headband suitable for Speedglas G5-02 welding helmet. Not separately approved as PPE.
Modular Jib system features a simplified design that enhances worker safety in mulitple applications. Increased rail-lenght configurations improve working coverage while a new design facilitates easier system transport. Fail-safe mast lock, increased height, extended reach, powder coated and galvanised components. Height: 4,6-7,6M, offset reach: 2,3m. PRICE WITHOUT TRANSPORTATION COST!
Removable counterweight box (without concrete) with built in fork pockets and lifting ring attachement points (sold separately). Inegrated leveling bubbles. Open mulit-directional base designed to accomodate a wide array of fork shapes and sizes. Dimensions: 2,01 x 1,64 x 1,39m. PRICE WITHOUT TRANSPORTATION COST!
Charging station for 1 battery with power.
Standard battery for PX5. Usage duration depends on filters used. Charging time: 5h.
T200 hood with face seal, air duct and head harness assembly, breathing tube. To be combined with the PX5 motor unit.
Airhoud T200 complete with internal facial joint, combination of air conduct and head harness and breathing hose. To use with motor unit PX5.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with RPB PX5 motor unit or on compressed air line. For heavy applications. Respiration, face and head protection in one. Includes: air hose with aluminated cover, aluminated shoulder cape, and aluminated top and back cover.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, cover for gas filter, flow meter, battery and charger and a pack of prefilters. NPF: Depends on hood used.
Filter cover for gas filter in combination with motor unit PX5.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters and designed for welding applications. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, spark arrestor, flow meter, battery and charger, P filter and pack of prefilters. NPF: Depends on hood used.
The Compact Supreme 150 Heavy Duty Wipe Clean Lifejacket is ideal for heavy duty commercial fishing applications such as crab and lobster fishing. She is also suitable for construction workers. Colour: Orange. Buoyancy: 172N In accordance with: EN ISO 12402-2 : 2006 +A1 : 2010 for inflatable lifejackets performance level 150 EN ISO 12401 : 2009.
Welding air hood from the RPB series consisting of welding hood with folding screen, air hose and FR shoulder cape and automatic welding filter. For connection to the motor unit PX5.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
Scanner holster for harnass (art. 1049711): QUICK, SECURE ACCESS; INDUSTRIAL GRADE; VERSATILE BELT LOOP CLOSURE; ADDITIONAL STORAGE; WASHABLE – Hand wash and dry with mild soap and water; ALL-DAY COMFORT. Sizes: SMALL – Fits scanner faces 3in W x 2in H // 7.6cm W x 5cm H LARGE - Fits scanner faces 4in W x 3in H // 10cm W x 7.6cm H
Height adjustable mast for 1 user. Height-adjustable masts can be easily adjusted using the integrated winch or with a drill fitted with a slip clutch (accessory). Height: 3m - 4.6m. Offset/range: 2.3m. PRICE WITHOUT TRANSPORTATION COST
Forestry trousers CH14: Stretch ripstop for comfort; Reflective panels; 8 storage bags; Detachable front and back panel; Large back zip pocket; Padded back panel for wearer comfort; elastic waist; Segmented reflective striping. Quality: 92% Nylon, 8% Elastane 230g/m². Available sizes: S-2XL. Available colours: Black.
Safety spectacle with black lenses in PC. Has an adjsutable nosebridge and temple. Has a HydroShield coating: anti-scratch, anti-fog.
Headband for Uvex X-Fit Pro spectacles.
Transport jerry can, painted steel, 5 litre, with clip closure for safe transport and stocking of flammable and hazardous liquids. Dimensions: D 120 x W 310 x H 230mm. Pour spout 1060173 not included.
TYVEK® IsoClean® hood with ties option 00 (Bulk packed) Bound seams. Bound hood opening. Full face opening . Ties with loops for adjustable fit. White. Available sizes: one size For cleanrooms up to ISO 7, GMp C/D. NOT CLEAN PROCESSED. NOT STERILIZED.
Allows contaminated casualties to change in a dignified manner as possible after being decontaminated in a drench shower. Pack contains: orange zip-up holdall with instructions, pair thick grey socks, pair black rubber non-slip footwear (adult kit, size 42), pair of disposable underwear, disporable green blouse and trousers, disposable white towel, sanitary towel, olive green waterproof trousers and jacket, P3 dust mask, bag for disposal.
Safety glasses in dark PC with foam insert and headband. Metal-free frame in which branches are made of of two types of material. Contains an anti-scratch and anti-fog coating.
Allows contaminated casualties to change from their own garments in as dignified a manner as possible prior to decontamination in a drench shower. Pack contains: pair of disposable gloves, disposable face mask,pair of surf shoes (size 8), thermal waterproof cape, pair of socks, numberd cloting bag, numbered valuables bag, 'fish'knife, face wipe, 2 cable ties, numbered wristband, pictogram instructions(adult)
P2 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
A2 filter in plastic housing for 3M half face masks Secure Click. Protects against organic gases and vapours with a boiling point >65 °C. Dust filters series 7900 can be mounted on gas filter if dust filter holder D701 is used. Class 2 gas filter: for max. concentration of 0.5%.
