BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Plastic spill tray without grid. Capacity: 30 litres. Weight: 2.5 kg. Dimensions: 805x405x170mm.
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist, ozon and smoke particles.
Handy little bag for assistance during reanimation including cissors, rasor blade, disposable gloves, towel, AmbuRescue.
Leather sweatband for welding helmet 100. Not separately approved as PPE.
Breaking knife for right and left-handers in black plastic with pocket clip. The red slider is secured at the back. NOT PPE! Replacement blades: 1021547.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 27 cm.
Gas suit in butyl The suit has fixed boots size 46 and gloves. The pressurized air device is worn outside. The suit comes with a 3S full face mask and a long gas-tight zipper that goes over the head. Suitable for LA96 PF lung governed demand valve and adapter for LA96 ASen AUTOMAXX. Harness mask on the inside. Perfect seal due to integrated mask. Sizes: Universal.
Rescue fork extendible to 4.8m to work from a distance, and allow a person who has fallen descend with a fall-block Ultra-lok RSQ. The descent button can be operated remotely.
Hygiene set for Peltor X5 earmuff.
Hygiene set for Peltor X3 earmuff.
Batteries 3AAA alcaline for head and helmet light VIZION I ATEX (1016736)
Descent and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
Winch for descents or rescue. Max load 204kg. To be used in combination with Davit-system or AM100 tripod. Handle to be used in 2 different ways (reduction 4 and 9:1). Best used in combination with suspension harness. To be used in confined spaces.
Very robust fall-prevention device, 15 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 12 kg.
Polypropylene ISO Safety Sign - Emergency exit (right)
Kit with ABS holder in white and red letters. 10 cards in polypropylene for ladder inspection. 1 permanent marker. All marking in FRENCH.
Kit with ABS holder in white and red letters. 10 cards in polypropylene for forklift. 1 permanent marker. All marking in DUTCH.
Aluminium 34L bottle of testing gas CO 100ppm in oxygen.
Aluminium bottle of 58 liters with 2 test gases for calibration of gas detectors. To use to calibrate manually or to combine with the MicroDock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%) in N2.
Yellow fire safe cabinet with exterior in epoxy-steel and interior with light-chemical resistant, melamine plastic finish. In the bottom of the box, there are 4 levelling feet to cope with an uneven surface. At the top of the cabinet, there is a connection point for earthing. Joints, seams and vents close automatically in the event of fire. On the outside, there are symbols and hazard signs (ISO 3864). interior : 2 stainless steel shelves with 75kg load capacity, 1 stainless steel insert grid with 75kg load capacity, and 1 stainless steel bottom collection bin with 22L collection capacity. Dimensions : 600 x 615 x 1296. Weight :201 kg. Delivery in house is possible on request.
Anti-static absorbent pads on 76 cm x 46 m sized roll, sheets doubly perforated every 46 cm. These heavy-weight perforated pads on a roll are packaged in a box. Available per roll. These pads are made of 1-plymelt- spun polypropylene with 2-ply spun non-woven fabric for extra tear resistance. Can be used for cleaning parts. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 140 litres.
Safety cutter to trim light flash on moulded plastic or laminate. No PPE. Replacement blades: 1023273.
Ceramic replacement blade. Outstanding features of straight ceramic knives: Your cut is not a straight line but is slightly curved. The cutting force is transferred to the item via a point. This means extremely precise de-burring. Dimensions: 60mm. Width: 15mm Thickness: 1.7mm
Knife with straight blade for de-burring and smoothing plastics and soft metals. The blade's cutting edge is slightly convex, making it possible to perform high precision cutting. Replacement blade: 1024415.
Ideal for cutting thin material due to extra plastic spring. Replacement blades: 1023110.
Testgas NH3 25PPM cylinder 34L. Only for use in combination with pressure reducer.
Red backpack in Plan design Space and attachment belts for oxygen bottles of 0.8/1.0/2.0 litres Including inner bags This is a very tough, good quality and easy-to-use bag with ergonomic handles and straps which is very comfortable on the back and shoulders. Dimensions: 48x54x25cm.
100 long plasters measuring 18cmx2cm.
Inox replacement blades for knife Cartonax, straight. Thickness: 0,30 mm. No PPE.
Inox replacement knifes for safety knife Martego. Dimensions: length: 26mm, width: 18,5mm, material thickness: 0,40mm. Package: per 10 pieces.
Extra strong cloths for absorption of universal liquids. Dimensions: 41 cm x 51 cm, lightweight, perforated <(><<)>(><(>&<)><(><<)>)> bonded. Absorption capacity: 136 litres.
Anchorage for I-beams ranging from 6.35 to 60.92 cm. Maximum thickness of I-beam: 3.81 cm. Can be used both horizontally and vertically. Can be used in combination with a safety line or fall-protection block.
Trolley for easy movement of full drum 9009 after testing of emergency shower.
Escape hood with COP2 filter, provides protection against smoke fromfire, among other things. Easy to put on, even for people who wearglasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in bag to be combined with belt. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
Face shield in black etched metal mesh. Designed for use with V5 visorsystem for attachment on 3M™ G3000 of G22 Series helmet. Ideal for forestry.
Protective foam microphone windsock cuts transmission interference, for use with PELTOR™ Alert, LiteCom Plus, ProTac II, <(>&<)> ComTac XPI Headsets.
Orange life vest made of closed cell polyethylene foam for rescue ofpersons weighing 90 kg or more. Time required to assume survivalposition: just 5 seconds. With signal whistle and reflective strips.
White thick cutting mat. Dimensions: 900x600mm. Not PPE.
Aluminium bottle of 58 liters with 5 test gases for calibration of gas detectors. To use to calibrate manually or to combine with the MicroDock II. Always use a shutter. Content: CH4 (2,2%), O2 (18%) in N2, 25PPM H2S, 100PPM CO, CO2 (0.5%)
Gas detector reusable O2 and H2S with shock resistant casing detects H2S, CO, O2 and % LEL simultaneously. Standard with built-in pump, data logging and event logging. Half-yearly calibration required. Power autonomy: Approximately 13hrs. Includes rechargeable batteries and charger. Sensors to be replaced after 2 years Sensors must be switched off. Concentration still visible on the LCD display. Registration of STEL/TWA exposure. Measurement results can be read off via USB cable. Versions with LEL sensor are calibrated for methane. Sensitivity to other explosive, hazardous substances can be set. Alarm values: O2 19.5%-23.5%. Compatible with Micro Dock II.
Free-standing counterweight anchor that can easily be placed on top of a roof to form a point of attachment for one employee. Includes sixteen cast iron weights of 20.3 kg, a base plate, a pole and a D-ring.
Mast adjustable from 1.20 to 2.13 m with rotating head <(>&<)> materials. Including bracket for a winch. Ideal for applications where where a tripod cannot be used. Can be suspended from anchor point in ceiling or other structure. Combined with base (Art: 1026260) and winch or fall-block.
T-shape base for extendible davit arm.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical and horizontal use; if horizontal: 2-metre anchor loop must be used (Art. 1026475).
Compatible with all ISO certified containers. Provides an elevated anchoring point, allowing free fall requirements to be reduced. Provides a total fall protection solution, even for a single container. No tools or adjustments to container required. Height: 1.25m. Weight: 12 kg. Always combine with fall-block.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for extremely sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Safety line, 2 metres comprising belt with integrated shock-absorber. With 2 standard carabiner hooks. Hooks tested in such a way that the safety line may be positioned around a structure if the hook opening is insufficiently large. A combination of anchor loop and safety line is thus created. Serves as connection between anchor point and harness. With smaller, robust EZ shock absorber that provides shorter braking distance.
Double safety line, 2 metres comprising belt with integrated shock-absorber. With 2 standard carabiner hooks. Hooks tested in such a way that the safety line may be positioned around a structure if the hook opening is insufficiently large. A combination of anchor loop and safety line is thus created. Serves as connection between anchor point and harness. With smaller, robust EZ shock absorber that provides shorter braking distance.
8-layer gauze pads measuring 5X5cm. 100-item packs.
* Anti-fatigue tiles Fatigue step* Super comfortable interlocking tiles in nitrile and rubber with openings in two variants* Resistant to temperatures of 160°C* Individual tiles, easy to move* In line with slip resistance EN13552 Category R10* Optional: sloping edge in yellow or black* Product height: 16 mm
• Effective anti-fatigue mat available in two variants: 1. Bubble mat (100% natural rubber) 2. Bubble mat Nitrile (75% natural rubber/25% nitrile) The addition of nitrile ensures excellent resistance to oils and chemicals. Both variants have a raised, bobbled surface to stimulate the blood circulation• Available as complete mats or interlocking parts for longer mats• Product height: 14 mm
* Durable diamond surface resistant to PVC flooring* Self-cleaning top layer provides resistance to many industrial chemicals* With bright yellow edges* Supplied with sloping edges* Product height: 14 mm
* Durable diamond surface resistant to PVC flooring* Self-cleaning top layer provides resistance to many industrial chemicals* Supplied with sloping edges* Product height: 14 mm
* Raised ribbed surface for more grip* In line with slip resistance DIN 51130* Fire Resistant according to DI 54332 (B2)* Product height: 9 cm* Also available as Otthomat Safety ribbed with bright yellow slanting edges
Crepe bandage with red edging. Dimensions: 5cm x 4m
Plastic spill tray with grid, handles. Tray capacity: 250 liter. Weight:30kg. Carrying capacity 1250kg. Dimensions: 1380x1290x280mm. Transportable with reach truck. Convenient for stocking and handling of dangerous and chemical goods.
Fall-stop device with 2 metre flame retardant strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Refill for mobile spill kit 69L SKO-CART for quick and efficient response to leaks or maintenance projects, anywhere in the factory. Absorption capacity: 69 litres. Content: 1 roll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of OP quality.
