BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Motor unit Clean Air for suit RJS, including battery, hose, and belt. Filters and battery charger to be ordered separately.
Non-rechargeable battery for Clean Air motor unit for use with the RJS suit.
Charger as accessory for motor unit Clean air Chemical.
Exterior: Stand-up collar, concealed snap button closure under facing 2 patch chest pockets with flaps with hidden press studs, 2 patch side pockets with flaps with hidden press studs, 2 loops for gas detectors, round sleeves, sleeve narrowing by means of a button. press studs, flame retardant reflective tape (50 mm). Inside: 1 inner pocket, identification label. Material: Sio-Safe Essential Eco: 50% cotton + 30% Tencel = 19% recycled polyester + 1% AST. +- 320 g/m. Complies with: EN 61482-2 ELIM 9.7 cal/cm² - ATPV 11 cal/cm², EN ISO 11612 A1 A2 B1 C1 E3 F1, EN ISO 11611 Class 1 A1 A2, EN 1149-5, EN 13034 (Type PB 6), EN 17353, EN ISO 13688. Available colours: navy-fluo yellow Available sizes: 44 - 64
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. The unit consists of a regulator, pre-collector and main filter (SR 292), all of which are mounted in an enclosing steel sheet stand. The unit can be placed on the floor or mounted on a wall. The pre-separator has automatic drainage, separates coarser particles, water and oil. The SR 292 main filter consists of a carbon filter part (500g) , surrounded by two P3 particulate filters. The air is cleaned to remove any remaining particles/gases/vapours/odours. A Y coupling that increases the number of outlets is available as accessory.
Output for 2 persons / compressed air hoses to be installed on Sundström filter system.
Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only.
For use together with Sundström compressed air filtration system. Type A protects against oils, organic gases and vapours, such as solvents, with boiling points > +65 °C. Type P3 protects against all types of particulate pollutants, e.g. dust, mist and smoke.
A safety rope with a detachable and easy to handle floating rope. Floating bag with wide stiffened opening. High visibility color with reflective details. Breaking strength of 10kN.
Splash suit in chemprotex 300 to be combined with Malina motor unit Clean Air (ordered separately). Fitted with a filter mounting nozzle (filter not included) for emergency use in case the motor unit should fail. Sleeve end with glove adaptors. The trousers have fixed socks and straight legs as a boot cover. Sizes: S - XXL.
Blue fitover safety glasses with pressure-free fit. Very light, fits over most prescription glasses. Frame made of 50% bio-based material (castor oil), of which temples consist of 47% recycled material (PCR). Clear polycarbonate lenses with integrated side shields, made of 71.5% mass balanced polycarbonate. The innovative temple concept makes use of Uvex X-stream technology for an excellent, non-slip fit and a wide range of applications. Protects against dust and chemical spatters. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog- free on the inside and easy to clean. PCF (Product Carbon Footprint) = 0,12kg CO².
Sporty goggles, derived from the successful Uvex ski goggles. Very comfortable, good protective coverage thanks to the DCT technology. Glasses with limited ventilation. Frame consists of 13% recycled material (PCR). Headband consists of 45% bio-based material (Castor oil) and 60% recycled yarn. Equipped with white polycarbonate lens consisting of 71.5% mass balanced polycarbonate: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. PCF (Product Carbon Footprint) = 0,19kg CO².
Breathing twin hose tested and approved together with remote filter holder SR905, fan unit SR500/SR700, intended for use with half face mask SR900.
Combination filter class 1 for use with Sundström half and full face masks. Provides protection against organic gases and vapors, with boiling point > +65 °C, inorganic gases and vapors, acid gases and vapors such as sulfur dioxide and hydrogen fluoride, ammonia and ammonia vapours, mercury vapors and dust particles, fog and smoke.
High shoe in waterrepellant microfiber, with a synthetic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D-mesh. Outsole in PU Light/PU, SRC antislip, oil and carburant resistant. Removable, Soft Light insole made from ultralight expanded polymere. Sizes: 35-48.
Ventilated coverall with stitched and over taped seams. Fully enclosed over hood with clear front and crown see through visor. Front closure with double flap hook and loop, single zipper closing to center, horizontal opening. Three exhaust valves; two at hips one in hood back. Air distribution plenum made of Tychem® 6000 fabric. Emergency Egress. Attached non-dissipative under gloves and integrated dissipative socks. Conform: EN 1073-1, EN 1149-5, EN 14126, EN 14594, CAT 3 *Made to order. Available sizes: S-3Xl Available color: grey
Automatic welding cassette with three automatically darkening welding filters.Suitable for helmets G5-01 and G5-03. Dimensions of welding filter: 73x109mm. Battery life: 2000 hours.
Aluminum carabiner manual screw lock closing, opening 18.5 mm, weight: 80 gr. Breaking force: 23kN.
High shoe in robust nylon and microfiber with composite 200J toecap and synthetic antiperforation sole. Foreseen of a soft inlay sole with membrane in CoaTex. Sole in PU/TPU. Sizes: 39-48.
ZOLL AED 3 Battery Pack (Lithium Manganese Dioxide Battery Pack). Suitable for the Zoll AED 3 semi-automatic (1060428) or the Zoll AED 3 fully automatic (1060429).
The Zoll AED Plus is a fully automatic device that is monolingual.
The Zoll AED 3 is a fully automatic device that is monolingual.
Kit with SR 500 fan unit and face shield SR 570 with bump cap, 1 pc protective film, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs pre-filter holder, flow meter, plug kit, cleaning wipe and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Outside dimensions: 1930x1141x758 mm Total height: 1930 mm + 45 mm removable visual alarm Weight: 410 kg Power supply: standard 380 V Maximum load per shelf 70 kg 4 adjustable shelves with distribution boxes on each level cut-out for transpallet on all 4 sides Self-closing doors with door contact Overpressure 2 smoke detectors with detection box for fire alarm reporting and software Forced ventilation Flashing light with siren Aerosol extinguishing system Temperature detection Software UPS battery Approved fire control panel KIWA certified K21045 Transport cost included- when ordering please do state CLEARLY whether a forklift is available.
Very light and compact mask. The cartridges are profiled to give a perfect field of vision. Featuring a quick release harness with a djustment points for optimal comfort. The inner half-mask has 2 inhalation valves to prevent fogging. Mask comes with 2 ABEK1P3 filters that can be replaced.
New portable 4-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,LEL,H2S,CO.
Kit of level dependent rechargeable earplugs. They help protect your hearing, and can help improve situational awareness and communications in challenging environments. Intuitive one-button operation. Integrated with state-of-the-art level-dependent technology, the LEP-100 helps provide hearing protection in noise and situational awareness in quiet environments.
Sportive spectacles in clear polycarbonate. The uvex i-guard with its highly flexible frame ensures the best protection – and adapts individually to the widest variety of face shapes. The ergonomically shaped glasses reliably protect against liquids and particles. The grey polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Sportive goggle in clear polycarbonate. The uvex i-guard+ with its highly flexible frame ensures the best protection – and adapts in dividually to the widest variety of face shapes. The ergonomically shaped glasses reliably protect against liquids and particles. The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, perman ently fog-free on the inside and easy to clean.
Get the durability your job demands. Do more with enhanced capabilities like Bluetooth connectivity, military-grade shock resistance, sub-zero operating temperatures, and the most comprehensive data entry options. Plus, print 4,500 labels with one full charge. This printer is supplied in a hard carrying case. No PPE.
Faster. With less waste. This is our fastest, most advanced portable printer ever. Print at a speed of 76.2 mm per second. Cut the labels automatically. Work all day with one full battery. Use one printer for countless applications and print on the most durable materials.
Replacement earplugs for Caboflex.
Replacement filter for Adflo odour filter. Odour filter that removes unpleasant odours. Does not provide protection from gases or va pours, only improves comfort. If gas filters are already being used, it is unnecessary to use an odour filter. Can be used in combin ation with Adflo odour filter.
Microphone for Litecom III. Spare part.
The 3M™ E-A-R™ Flexible Fit HA earplug has a patented design, which ensures that it is washable and reusable. Thanks to the soft foam tip and flexible stem, it can be easily inserted into the ear with one or two hands. The foam tip molds to the unique shape of the ear canal and helps block out sound. The Flexible Fit earplugs are especially suitable for activities that require gloves or cause dirty hands or situations where only one hand is free to put the earplugs in. Suitable for universal noise. In accordance with: EN 352-2 (SNR 35 dB with 2 hands inserted, SNR 30dB with 1 hand inserted).
Cleans and cares for skin and hair, freshly scented, hypoallergenic for sensitive skin. Biodegradable formula with ECOLABEL. Dispenser: 1060725
Hygiene set for hearing protector FM Radio, Radio XP en WS Alert XP headsets. Replacement cup cushions to ensure a proper tight seal for optimum protection, as well as new foam inserts. Each Hygiene kit contains 2 x foam inserts and 2 x cup cushions which can be replaced in a few easy steps. Not certified seperately as PPE.
Shoe polishing set blue, consisting of shoe cream, brush, polishing cloth and cleaning instructions.
Hygiene set for hearing protector DAB/FM Radio and WS Alert XPI headsets. Replacement cup cushions to ensure a proper tight seal for optimum protection, as well as new foam inserts. Each Hygiene kit contains 2 x foam inserts and 2 x cup cushions which can be replaced in a few easy steps. Not certified seperately as PPE.
Low shoe in black full grain leather. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in PU/TPU. Sizes: 35-51
Set of ballistic spectacles. Case is supplied with 3 PC lenses: clear, smoke and yellow. Srtap is also supplied inside the case. Lenses have a PLATINUM coating: anti-scratch and anti-fog on both sides.
The 3M™ PELTOR™ CH-3 FLX2 Headset features newly designed speakers and microphone, bringing hearing protection and communication in noisy environments to a new level of performance. The newly designed double hood gives a modern and sleek look and has a bright yellow color for better visibility.
Single lightweight and quick to deploy decontamination shower. Fully inflatable, can be set up in a few minutes and will stay standing without continuous inflation, nor mechanical frame. These shelters are lightweight and compact to transport and to store. Version in yellow TPU with gloves on the sides of the shower that allow a second person to help the contaminated person to wash. With sump. Dimensions pack size: 70x45x30cm. Weight: 25kg.No PPE.
Hand cleaner with natural abrasive grains of olive kernel flour for removing heavy dirt. Perfumed, skin neutral pH value. Dispenser: 1060646
The Euro Pearl Soap is a lightly perfumed hand soap for daily use in sanitary areas. Dispenser: 1003959
Fully encapsulating ChemMax 1 suit with HDPE barrier fabric to be worn with the e-breath Powered Air-Purifying Respirator. Version with non-slip soles.
Functional and sustainable high-vis jacket made of lightweight organic cotton and recycled polyester.
High vis sweatshirt jacket made of recycled material. Comfortable soft jacket with zip pockets and stretch reflective transfers.
Very soft, durable assembly glove made from recycled polyester. One pair is equal to a 0.5l PET bottle. The glove is 15 gg knit, contains spandex and has a new nitrile foam coating that uses less water in production. Touchscreen function - operate your smartphone with gloves on.. In line with : EN 388:2016+A1:2018 4121X - EN 407:2020:X1XXXX
Automatic downward evacuation device for 1 person. Descent speed approx. 2m/sec regardless of weight (max. user weight: 141 kg). With 9 ,6mm kernmantle rope with 20m lenght and 2 carabiners, comes in a handy transport bag.
Intrinsically safe (Ex-proof) Li-ion battery 18V,3.0 Ah for SR 500 EX motor unit.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Inside of mask equipped with comfort pad for better sealing. Equipped with individually adjustable, elastic head bands. NPF: 50. Planet version, manufactured from 26.5% recycled material.
Electric glove in natural rubber latex. Operating voltage of 26.500 volts, test voltage of 30.000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 360 mm. IEC 61482-1-2 Box tested: APC-2
Electrically insulating glove with mechanically strong resistance. Protects against risks of Arc Flash. Outside in black, inside in red, outside has a non-slip coating. working voltage of 17.000 volts, test voltage of 20.000 volts. Length 360 mm, Sizes: 7-12. In accordance with EN60903 class 2 cat RC. ASTM F2675: 55 cal/cm²; IEC 61482-1-2 Box tested: APC-2
The SST1 single gas detector provides up to three years of maintenance-free operation and is available in H2S, SO2, CO, or O2 (2-year only) models. Its simple design makes it perfect for users looking for ultimate protection while being easy to use, durable, and c ost-effective.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWs automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
Signa polo shirt Bird Eye Knit, 100% polyester, buttons, weight 175 g/m², collar in grey.
Absorbant socks measuring 13 cm x 5 m. These standard-weight socks are packaged in a bag. These socks can be easily connected together by means of hooks and rings. The yellow cord inside the sock provides extra solidity when picking it up. They do not absorb water, and they float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 49 litres.
