BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
183 cm tray for attaching tools with a maximum weight of 15.9 kg to avoid tools falling when working at height. Provided with a loop on one side and a carabiner with safety lock on the other side. Not PPE.
Unique sleeve design conforms to the size of virtually any drill battery.Sleeve is cinched to the drill, allowing the drill to be tethered off while being used at height.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Extra lining on shoulder and leg straps for greater comfort and ease. Chest and leg straps fitted with quick release facility with lock. Reinforcement on shoulders to prevent wear. Straps made of dirt-repellent and abrasion resistant Repel webbing. Standard version with trauma loops on leg straps for deployment after a fall. Harness is very easy to put on. Integrated fall indicator.
Harness for heat applications made from Nomex on Kevlar carrier with 2 anchoring points. Combustion temperature 425°C. Easy to put on due to delta shape on the back. Test weight: 140 kg, Sizes U-XL.
Effective skin protection against water-soluble substances. Stokoderm Aqua stabilises and regenerates the skin barrier and prevents softeningof the skin during damp work and inside gloves and protective clothing.Also an absolute must for frequent contact with water-based substances:water-based oils and cooling lubricants/ water-based solutions of dyes, acids, alkaline solutions, salts, cleaning agents and disinfectants/ cement, lime and fertilizers. Stoko Protect+ 1000 ml. Protection against water-soluble substances. PPE category: not applicable.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWs automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
Dispenser for use of 1000 ml Protect soft bottles.
Ergonomic plastic and foam cutter. Suitable for right and left-handers. The Teflon-coated metal foot is very strong and even resistant to hard and thick foils (no wear and tear). Easier to change blades than COUPPY, SNITTY, and MOBILEX. "GS tested for safety". OPTICUT No. 434: Base is placed differently, for pushing cutting motion. Includes lateral protection that supports the plastic spring when shielding the blade. Replacement blades: 1014310
Descending and rescue device. Max. Workload 204 kg. To be combined with Davit systems or AM100 tripod. Use lever in 2 positions (weight reduction 4 and 9:1). Preferably to be used with seat harnesses. Ideal for enclosed spaces.
Lock out carry case made of 600 denier polyester. With a removable 95cm shoulder strap. Contains 8 compartments. Not PPE.
Breaking knife for right and left-handers in black plastic with pocket clip. The red slider is secured at the back. NOT PPE! Replacement blades: 1021547.
Refill for mobile spill kit 69L SKO-CART for quick and efficient response to leaks or maintenance projects, anywhere in the factory. Content: 1 roll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of MRO quality.
Safety scissors especially suitable for cutting fibreglass cloths. Prevents fraying.
Kit to connect Peltor hearing protection to the Versaflo hoods M-series.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 5m. Anchor point for protection of one person.
First Aid Note Handy booklet with instructions for the administration of the first aid
T-Airvisor® with CP visor, airduct and adjustable head harness. Unique low flow indicator. PE breathing hose not included (1035014) For grinding/paintspraying. To be used with T-air motorunit. In line with En 12951:2005 class 3B
Individually packed dust mask, class P2, for harmful dust. Form- retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the mask always retains its shape, even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands. NPF: 10.
PVC hoses 20m offering outstanding aging qualities and long service life.Resistance to sparks and scorching.CEJN safety couplings that are quick and easy to connect yet prevent accidental disconnection.
Cut and impact resistant apron in water and oil repellent split leather. Lining in Tekinox for maximum cutting resistance. Adjustable neckband with velcro closure. Length: 80 cm Width: 62 cm.
T-Airvisor® with CP visor, airduct and adjustable head harness. Unique low flow indicator. PE breathing hose. For grinding/paintspraying. Combined with T-airline regulator kit (661368). To be used with compressed air systems. NPF 500.In line with En 14594:2005 class 3B
EVOH film barrier hood with exalation valve, PETG visor, air duct and adjustable head harness. Unique low flow indicator.PE breating hose. For high hazard applications. Combined with T-airline regulator kit. To be used with compressed air systems.NPF 2000. In line with EN 14594:2005 Class 3B/4A
Core jacket rope of 15 meters and 10.5mm diameter with a knot at one end and a musketon at the other, available in various lengths. Conforms to EN353-2
Core jacket rope of 30 meters and 10.5mm diameter with a knot at one end and a musketon at the other, available in various lengths. Conforms to EN353-2
Plastic ABE2P3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and particulates.
Replacement cap T-airline 1000M x2.
Descent/evacuation Rollgliss with 9mm kernmantle rope of 60m. Rollgliss can be hung on Rollgliss tripod eyes or using another anchor point. Standard equipped with a 3:1 reduction, which makes it easier to raise and lower the load. Total descent distance: 20 metre. Recommended accessories: Rollgliss 45L bag for storage and Jumar line clamp.
Hygiene set for hearing protector Protac III.
Trousers, Kingsmill, 65% polyester, 35% cotton, 245 gr/m², multiple pockets with flap and velcro. No PPE
Long sleeved poloshirt in 50% coton/50% polyester (180g/m²). Durable and strong, neck tape, 3-buttons, cuffs at the end of the sleeves, straight model with side splits. Available colours: red, black, white, grey, navy and royalblue. Available sizes: XS-7XL.
Flame retardant shirt in 65% viscose/22% aramid/12% polyamid/2% AST fibre (250g/m²). Press-stud closure under flap, straight collar, 2 chest pockets with press-studs. Shoulders and upper arms in hi-vis yellow with reflective striping. Available sizes: XS-4XL. Available colours: navy/hi-vis yellow.
Winter hat in 100% polyester fleece anti-pilling (80g/m²), low profile model, ear protectors, YKK fastening. Available sizes: universal. Available colours: black, navy, forest green.
Poloshirt, 50%cotton 50%polyester, 180gr/m², piqué, necktape, 3 button closure, straigth model with side splits. Available sizes: XS-7XL. Available colours: white
Innovative fit-over frame, visible light transmission: approx. 60 % ,color: light-green 810-<(><<)>940 DIR LB3 LV CE S (OD3+) 940-<(><<)>980 DIR LB4 LV CE S (OD4+) 980-1064 D LB6 IR LB7 LV CE S (OD7+)
Innovative fit-over frame, foldable temples , visible light transmission: approx. 35% ,color: magenta 190-315 D LB5 R LB4 LV CE (OD5+) >315-375 D LB4 R LB5 LV CE (OD5+) 730-<(><<)>755 DIR LB4 LV CE (OD4+) 755-840 DR LB5 I LB7Y LV CE (OD7+) >840-855 DIR LB4 LV CE (OD4+)
Ultralight OTG spectacles, white , visible light transmission: approx. 75% ,color: light-grey 850-900 DIRM LB2 LV CE (OD2+) >900-950 DIRM LB3 LV CE (OD3+) >950-1030 DIRM LB4 LV CE (OD4+) >1030-1400 DIRM LB5 LV CE (OD5+) >1400-2200 D LB4 IR LB4Y LV CE (OD4+) 2400-2800 DIR LB3 LV CE (OD3+) >2800-11500 D LB4 I LB4Y LV CE (OD4+)
4-points cradle with sewn in PVC sweatband
Innovative fit-over frame, conventional temples. Visible Light Transmission: 45% Color: light grey. nm OD F18/F22.P1M02 180-315 9+ D LB9 + IR LB4 + M LB6Y 1002-<(><<)>1020 4+ DIRM LB4 1020-<(><<)>1030 6+ DIRM LB6 1030-1070 7+ D LB6 + IR LB7 + M LB7Y >1070-1080 6+ DIRM LB6 >1080-1096 4+ DIRM LB4 9000-11500 6+ DI LB4
Safety helmet with integrated eye protection made of ABS with grey reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated face shield (class 1) made of ABS with arc flash earflap. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated face shield (class 1) made of ABS with arc flash earflap and grey reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Msa’s replacement hard hat 6-point fas trac suspension offers a combination of advanced features for a comfortable and secure fit. Is has a quick and easy adjustment.
Replacement earplug for Xact-Fit. Packed in a bag containing 250 pairs. SNR: 26dB.
The ‘industry’ body warmer has a ‘fake fur’ lining . The body warmer offers extra visibility thanks to reflective piping on the front- and backside. De coating ensures rejection of dirt and water. The body warmer offer sufficient storage thanks to the chest pocket, two side pockets, two lockable flap pockets and a lockable horizontal side pocket. The bodywarmer is for 70% made of polyester and 30% of cotton. And has the 250g/M2 quality. The body warmer is available in navy and black in sizes XS-7XL.
Welding bumpcap from the 9100 MP Lite series in durable, lightweight material. Delivered with Adflo PAPR but without cassette.
Cut-resistant gloves with Hagane coil liner in combination with the nitrile foam coating on the palm provide a good grip and optimum protection against cutting wounds in both dry and humid environments. Sizes: 6-10.
The uvex pheos alpine combines the various requirements of the industrial sector (in accordance with EN 397) and mountain climbing (in accordance with EN 12492) in one helmet with an unparalleled fit . Multifunctional helmet for working at heights and rescue operations. Combination of features from the industrial protection helmet (EN 397) with the requirements for a climbing helmet (EN 12492) .Safety helmet with slot on the front for helmet lights.Side Euroslot adapters (30 mm) for attaching earmuffs or the uvex pheos visor system . Options for attaching head torches, goggles and face protection . Meets standard EN 397 and additional requirement for very low temperatures (-30 °C) . Firmly riveted four-point chin strap for use in accordance with EN 12492. Chin strap included (art. no. 9790.005) for use in accordance with EN 397. Light ABS helmet shell offers high level of protection and durability. Comfort features : Six-point textile band attachment ensures optimal fit and great comfort.Suspension harness with wheel ratchet for variable width adjustment.
The NH15 Escape Hood is specifically designed for users in an emergency incident. The NH15 is rated for 15 minutes and is available in 3 sizes. It does not require maintenance or fit testing and has a 5 year shelf life.
Low shoe in waterrepellant leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in mesh. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Autoclave goggle with PC lenses. Vented. Contains an adjustable strap and drainage channels for liquids. It is possible to have one wear prescription glasses and dust mask. Equipped with an Platinum coating.
Safety glasses in CSP polycarbonate. Sturdy, protective, stylish, comfortable and leightweight model (34g). Foreseen of a an adjustable nose bridge and Geco-injected temples, which fits perfectly all faces thanks to its shape-memory material. With Platinum coating: This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd / m²), to the most aggressive chemicals and delays fogging.
Reusable FFP Mask with a very low breathing resistance. AirWave® Pleated Filter for comfortable breathing and fatigue-free work. Longer use time, less consumption ProValve: Built-in valve, reduces condensation from exhaled air. Comfortable full-face seal made of washable TPE material which is gentle on the skin. DuraMesh®: strong and durable structure, keeps the mask in shape. ActivForm®: no nose clip needed Length-adjustable loop strap with clip for quick, simple and safe on and off. Single packed, 5 pieces in box. Tested and certified to EN 149:2001+A1:2009. All Moldex products and packages are 100% free off PVC.