BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P
Safety glasses with clear polycarbonate lens fitted with an anti-fog and scratch resistant coating. Soft material around the earbranches for reducing the pressure.
Hi-vis ladies' polo for ambulance workers with contrasting collar, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes. Quality: 60/40 cotton / polyester piqué tricot 180 gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: XS-3XL. Conforms to: EN ISO 20471 Class 2.
Superb protection against cuts and abrasion, successor of Hyflex 11-630
Extra thin (18gg) cut resistant glove that keeps the user cool all day long. High dexterity, nitrile coating on the palm and fingers. Approved for use in contact heat up to 100°C (15sec) with reinforced thumb grip and touch screen compatible. Sizes: 6-12. Complies with: EN388:2016 4.X.4.3.C, EN407 X.1.X.X.X.X
Low shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
High shoe in microfiber with a synthetic antiperforation sole and composite 200J toecap. With scuffcap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/Vibram Ecostep (recycled material), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48 (D/XD).
Comfortable half mask in rubber with double perfectly adaptable strap. Covers the nose, mouth and chin. Maximal confort because of two exhalation valves that keep the exhalation resistance low. With threaded connection EN 148 for screw-on filters.With quir adjustable strap. Not for filters > 300g. NPF: dependent on the filter used.
Super-light (300 g) safety helmet with short peak, made of strong ABS. With 6-point textile suspension (1000276) (51-63 cm), highly absorbent hydro-flock sweatband (1000299) and standard 4-point chin strap (1034406). Specially designed to prevent injury if helmet becomes trapped during a fall: chin strap opens automatically. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm Connect slot for attachment of hearing and face protection.
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Reduced peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: yellow, black, navy blue.
Absorbent pads measuring 7.6 cm x 122 cm. These heavy-weight socks are packaged in a box. Packaged per 12 pieces. These absorb all i ndustrial liquids, including oils, water, solvents and coolants. The great flexibility of the socks allows them to be easily placed around machines. Absorption capacity: 45 litres.
Automatic welding cassette with three automatically darkening welding filters. Width of welding filter: 54x107mm. Battery life: 2500 hours.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with ha lf and full face masks with standard threads.
AB2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C. Can be used in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0. 5 %.
Group Lock Box. Simplifies locking of large machines. Once the machine or process is locked, the keys are placed in the lock box. Each authorised team member secures a personal lock to the lock box. Not PPE.
T-shirt in single jersey, 145 gr./m², 100% preshrunk ringspun cotton. Comfortable design with long sleeves. Available in : white, black, navy, red, naturel, royal blue, bottle green, ash grey, sport grey, dark grey.
Replacement knifes, straight with large rust-proof cutting surface. Thickness: 0,63 mm, Lenght: 60mm, width: 19mm. Pack of 10 pieces. No PPE.
Designed for SAFE collection of used blades and once completely filled final disposal. Always remember: Carelessly discarded blades represent an imminent risk of injury to one and all! Once FULL, screw the lid to the point where the red lock pin engages = the container is now SAFE for disposal. Loose packed item. Sized: 100 x 100 x 210 mm. No PPE.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Labcoat in Micromax NS fabric. Collar with four front fastening studs and two hip pockets. EMN101 - 97.20cm length, 62gsm microporous polyethylene film / spunbond PP laminate, Three thread overlock stitch.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Crosstech (resistant against bacteria and chemicals). Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Sizes: 38-48.
Super lightweight sportive spectacles (21g) in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. Flexible frame with soft temples (XST). The clear polycarbonate lens is fog-free on the inside and anti scratch on the outside.
Working trousers in 60% cotton, 40% polyester (310 gr/m² twill). 2 thigh pockets under flap, 1 with mobile phone-pocket. Back pockets with flap and velcro closure. Double hem for +- 6cm extra length. Available sizes: 42-62 (NL); 36-56 (BE-FR). Available colours: Black, Navy, Khaki. Stockarticle in black, 42-52.
Extra high ranger boot for foundries in full grain leather with 200J steel toecap and anti perforation sole in steel scuffcap in PU. Closure: laces + zip. Fitted with a leather liner, padded tongue and interior insole made out of leather. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Outsole in PU/Nitril with heel, longwearing, with very good slip resistance SRC and oil, fat and acid resistant. Laces: 1035603. Sizes: 39-49.
Charging station for 1 battery with power.
Easy-to-clean belt for TR-600.
Gloves with five fingers, American cut. Palm, fingers and inside of thumb are made of para-amide coated interlock.. The gloves are fully lined with an acrylic/cotton felt. Elastic cuffs, finished with bias binding. The seams are stitched with a para-amide thread, overall length is 50 cm.
Long john in 80% merino wool/20% polyamid (200g/m²). 1x1 rib knit fabric, very good thermal protection and breathability, lengthwise seams for a comfortable feeling, elastic band in waist. Available sizes: S- XXL. Available colours: black. No PPE.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, green, blue, red, orange.
1 day on-site training fall protection by 3M. Content and location according to your needs.
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Has different diopters (+1,5/+2/+2,5). This glasses have very good colour recognition, a large field of view and brings resistance to UV-rays.
Low shoe in blakc leather. Fitted with a breathable liner in canvas. Outsole in rubber. Removable, polyurethane insole with textile layer. Sizes: 35 - 47. No PPE.
Flame Retardant Hi-Vis Raincoat in PU quality: • Fixed hood with drawstring • Concealed zipper under storm flap with press stud closure • Sleeves with adjustable snap button closure • Two straight pockets. Quality: 50% Polyester, 50% Polyurethane, 210 g/m². Available sizes: XS-5XL. Available colours: Fluo yellow and fluo orange. Complies with: EN 343 3:1, EN ISO 20471 Class 3, EN ISO 14116 and EN 1146-5.
Work trousers in easycare material that ensures good retention of shape and color with extra compartment and extra pocket with zipper. Back pockets with flap and velcro closure. Leg pocket with extra compartment and flap with velcro closure. Folding rule pocket with knife button. The knee protection pockets can be adjustable in two height levels. Reinforcement in holster pockets, folding rule pocket and knee protection pockets. The sizes C42-C64 can be extended by 5 cm. Quality: 65% polyester, 35% cotton. Available colors: red, sky blue, navy, green, khaki, gray and black. Available sizes: C42-C64 (extendable to C142-164), D84-D120.
Sandal in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU Wellmaxx, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
This new patented Dry Cooling technology, in partnership with Inuteq B.V, is designed to provide enhanced cooling comfort for the wearer. This revolutionary technology is activated with a small amount of water and re-activation is only required every 1-3 days depending on the environment, humidity and airflow.
Thin (15GG) and comfortable work glove made from merino wool to keep your hands warm, suitable as an inner glove in cold environments. Touchscreen and food approved. Sizes: 6-11.
Electro gloves MUST be stored out of sunlight and must NOT be folded. Due to the dimensions (250x500x100 mm) this case can be used for Class 0 upto Class 4 gloves, even in length 41 cm. New design with transparent cover (with UV filtration), can be fixed to a wall as well as transported by hand because of the retractable handle. Comes with a 100ml Luzenac talc container. The talc is recommended to increase comfort in use of insulating rubber gloves, it also makes them easier to done and doff.No PPE.
Practical plastic hearing protector with 3 wearing positions (over the head, behind the head, under the chin) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Terylene suspension for Concept helmet with slip adjustment.
Retractable polycarbonate replacement visor, suitable for attachment toConcept Spectrum helmet.
Signa T-shirt Bird Eye Knit, 100% polyester, rond collar, weight 150 g/m².
Double Lanyard, 1.8 metre length, consisting of elastic strap with integrated shock absorber. Non-stretched length of the Lanyard is 1.2 metres, which enables better manipulation of the Lanyard. Double Lanyard to allow continuous protection, even when switching be tween two anchor points. Fitted with a standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso.
Visor in green polycarbonate, gold coated. (Screen carrier to buy separately: 1014838 or 1000801). Resistant to high temperatures from - 50°C to +135°C. Dimensions: 500x250x1mm.
This Plastic and Paper Sheet Cutter with concealed blade provides for swift and cutting accident-proof work. Designed for a whole host of applications: The Easysafe features a patented cutting head design allowing for easy initiation of the cut while maintaining blade contact with the material, even on single layers of film or paper. The piercing point allows for insertion of the cutter into all types of paper and plastic sacks. The integrated tape slitter safely cuts packaging tape without an exposed blade. The unit allows for an easy blade change 150; no tools required! The cutter is capable of being locked with a special key to change the blade. For use in the sensitive-products industries, e.g. food, designed to exclude hygienic risks resulting from unauthorized blade changes. No PPE. Blades: 1015780
AX gasfilter in plastic housing for Moldex masks series 7000 and 9000 forprotection against organic gasses with boiling point <65°C. For single usage. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
ChemMax 3 PLUS with NeoSol EC27F gloves + PULL CORD.
Matching detachable helmethood (hood can be worn over a helmet ) for the parka Sentai. Colour: Navy
Seamless glove with nitrile 3/4 coating. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
Quick cleaning and disinfection of surfaces and equipment. Kills bacteria, mould and viruses in 1 minute. Non-corrosive. Also suitable for the disinfection of helmets, safety shoes and full-face masks. Refill: Art 1047969 (to be diluted with water).
White classic clog in microfibre with steel toe cap. Lining and heelpatch in microfibre. Sole in PU with good antislip. Adjustable step- in surface with inherited fastening buckle. Washable. Very suitable for HACCP. Sizes: 36 - 46.
Low shoe in waterresistant full grain leather, with an synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant textile liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49 (L) en 41-49 (XXL).
Flame retardant and antistatic t-shirt in 60% Protex®/39% Viloft®/1% AST (180g/m²). V-neck, long sleeves, stitched seams, length back: 69 cm. Very soft and good moisture regulating properties. Available sizes: S- 3XL. Available colours: navy, grey.
The Polar BUFF contains Polartec fleece at the neck for extra warmth. This buff is recommended for use in static work in cold conditions. Quality: 97% Polyester 3% Elastane. Available sizes: Universal. Available colors: Fluo yellow / navy, fluo orange / navy, navy and black.
Comfortable and sturdy stretch work trousers with reflection details, knee pockets and extra reflection piping. Quality: 65% polyester / 35% cotton. Available sizes: 42-66. Available colors: navy, black, and dark gray.
High boot in waterresistant full grain leather. Fitted with a Sympatex liner. Outsole in 100% rubber, oil and carburant resistant. Removable, antibacterial polyurethane insole. Sizes: 35-50.
· Seamless and multifunctional tubular made with Thermolite®, an excellent insulating fabric composed of hollow-core fibres. · It enhances comfort in cold temperatures by wicking moisture away. · Ideal product for wearing all year round, offering a higher protection against cold and variable weather, specially for moderate cold weather thanks to its Thermolite® fabric. · Breathable fabric. · Maintain body temperature. · Some designs incorporate two 3M ScotchliteTM retro-reflective stripes for enhanced visibility in poor light conditions. · Polygiene® treatment, that allows the fabric to remain cleaner for longer avoiding bacterial growth and stops odors.
Classic and comfortable polo shirt PPK180. Quality: 100% cotton, 180 g / m². Available colors: navy, white, red, royal blue, gray melange, gray anthracite and green. Available sizes: XS-7XL.
High shoe in hydrofugated leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/TPU Infinergy®, SRC antislip. Whole insole which is conform to ESD. Sizes: 40-48.
Refill can containing 400 pairs of memory foam, conically shaped earplugs for the HL400 dispenser (1048893). The skin friendly earplugs protect against general noise.
High shoe in microfiber, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with wheel ratchet. Has a Chamlon sweatband.
Black safety boot in PVC, fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC. Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Sizes: 35-50.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter! Suitable fo r: processes involving chemical risks.
AX screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
The PW3 Softshell Jacket is characterized by a modern fresh design and timeless stylish fit. High-quality 3-layer breathable, water- and windproof cloth. Quality: 94% Polyester, 6% Elastane, 160gr laminated to 100% Polyester Micro Polar Fleece 150gr 310g. Available sizes: S-4XL. Available colours: Fluo yellow/grey, fluo yellow/black, fluo yellow/navy, fluo orange/grey, fluo orange/black and fluo orange/navy. Complies with: EN ISO 20471 Class 2.
For very strong to extreme soiling involving substances such as paint, resins and adhesives. With gentle solvents and Astopon® (refined walnut shell flour) and nourishing components Content: tube of 250ml PPE Category: not applicable. Previous name: Slig Spezial and Kresto Paint
High-cut safety shoe S2 made of nubuck leather, with 200J steel toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Padded water tongue. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non- slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: 35-48.
Fire-safe storage cabinet for storage of hazardous substances. Outside has a powder coat finish. The inside has a plastic finish tha t is resistant to light chemicals. The two doors are self-closing and have an air spring that allows easy opening. The cabinet conta ins three 33 litre shelf trays and one 55 litre bottom tray. There are inlet and outlet openings at the top of the cabinet (fan avai lable as option). The cabinet has a 90 minute fire rating. Available in: yellow. Dimensions: W 1200 x D 615 x H 1968 mm. Weight 420 kg. Delivery to location of use possible on request.
