BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Sandal in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU Wellmaxx, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Blue knitted food approved glove from the Revillet range (per piece) in polyethylene, polyamide, stainless steel fiber with long knitted cuff, does not contian glasfibre. This glove has excellent cut resistance, tested according to TDM standard (ISO 13997 TDM: 62,80 Newton). Treated to be permanent hydrophobic. Prewashed, to make sure it will keep its form after nex washing cycles. Washable. Sizes: 6-11. Size 5,12 and 13 on demand.
Suspension I/79GD-R with linen bands for improved comfort. Suspension is plastic and textile, sweatband is cowhide leather. Sweatband extends around full perimeter. Sizes: 53-61 cm. For helmets of type Ben and Bop. Not separately certified as PPE.
High shoe in black microfiber/textile. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in PU/rubber. Sizes: 35-51
Hi-vis men's t-shirt for ambulance drivers with contrasting V-neck, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes Quality: 67% polyester / 33% cotton, 150gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: S-3XL. Conforms to: EN ISO 20471 Class 2.
Earmuff for helmet, used with V-GARD helmets. SNR: 28dB.
Ultra thin insulating gloves for electricians made of 100% natural rubber latex. Length 280mm. Arc Flash classe: APC1. REACH compliant.
Comfortable half mask in rubber with double perfectly adaptable strap. Covers the nose, mouth and chin. Maximal confort because of two exhalation valves that keep the exhalation resistance low. With threaded connection EN 148 for screw-on filters.With quir adjustable strap. Not for filters > 300g. NPF: dependent on the filter used.
Retractable polycarbonate replacement visor, suitable for attachment toConcept Spectrum helmet.
Sporty goggles, derived from the successful Uvex ski goggles. Successor to the Ultravision 9301 PC. Very comfortable, good protective coverage thanks to the DCT technology. Glasses with limited ventilation. Frame colour: green/blue. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes Supravision Extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
Dust mask, class P3, for toxic dust. Form-retaining thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its sh ape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfor t and better sealing. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve fa ces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands with closure. NPF: 50.
Automatic welding cassette with three automatically darkening welding filters. Width of welding filter: 54x107mm. Battery life: 2500 hours.
Group Lock Box. Simplifies locking of large machines. Once the machine or process is locked, the keys are placed in the lock box. Each authorised team member secures a personal lock to the lock box. Not PPE.
Red life-jacket (inflates automatically), suitable for all waters and all conditions, e.g. extreme weather, when wearing heavy, protective, waterproof clothing. The jacket keeps you safe even during unconsciousness and will keep airways clear of the water.
Labcoat in Micromax NS fabric. Collar with four front fastening studs and two hip pockets. EMN101 - 97.20cm length, 62gsm microporous polyethylene film / spunbond PP laminate, Three thread overlock stitch.
Quick cleaning and disinfection of surfaces and equipment. Kills bacteria, mould and viruses in 1 minute. Non-corrosive. Also suitable for the disinfection of helmets, safety shoes and full-face masks. Refill: Art 1047969 (to be diluted with water).
Easy-to-clean belt for TR-600.
Bermuda, 65% polyester, 35% cotton, 300g/m², multi pocket, zip closure. Available sizes: 42-64. Available colours: Navy, White, Black, khaki, dark grey. No PPE.
Low shoe in waterresistant full grain leather, with an synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant textile liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49 (L) en 41-49 (XXL).
Flame retardant and antistatic t-shirt in 60% Protex®/39% Viloft®/1% AST (180g/m²). V-neck, long sleeves, stitched seams, length back: 69 cm. Very soft and good moisture regulating properties. Available sizes: S- 3XL. Available colours: navy, grey.
High shoe in full grain leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a Gore-TEx liner. Laces are heat resistant. Has BIOMEX-PROTECTION-support for stabilizing the ankle. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
Labjacket with velcro closure without pockets, 30g/m². Available sizes: L-XXL. Available colour: white
Long john in 80% merino wool/20% polyamid (200g/m²). 1x1 rib knit fabric, very good thermal protection and breathability, lengthwise seams for a comfortable feeling, elastic band in waist. Available sizes: S- XXL. Available colours: black. No PPE.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Low shoe in blakc leather. Fitted with a breathable liner in canvas. Outsole in rubber. Removable, polyurethane insole with textile layer. Sizes: 35 - 47. No PPE.
Thin airy working or inner glove, tight knit in cotton and spandex. Tight fit. Sizes: 6-10.
High boot in waterresistant full grain leather. Fitted with a Sympatex liner. Outsole in 100% rubber, oil and carburant resistant. Removable, antibacterial polyurethane insole. Sizes: 35-50.
Safety glasses with clear polycarbonate lens fitted with an anti-fog and scratch resistant coating. Soft material around the earbranches for reducing the pressure.
Multirisk rain trousers with igh level of protection but still light in weight. The Hovi hi-vis trousers are a waterproof rain trousers with ARC protection in a light and improved Siopor® Excell fabric. The 3-layered fabric protects excellently against foul weather, heat, flames, welding sparks and the risks of an electrical flashover. These high-visibility trousers are soft and supple, making them a pleasure to wear in potentially hazardous working environments. Quality: 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m²; 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Available colours: Fluo orange/navy and fluo yellow/navy.
Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Fully coated PVC/NBR, water, and oil resistant, with chemical protection. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Sizes: 7-12. Conform: EN388:2016 4.X.3.1.C.P, EN407: X.2.X.X.X.X, EN ISO 374-1:2016 Type B: AJKL
Very thin and light glove, 15 gauge. The INTERCEPT™ yarn provides high cut protection while providing dexterity and comfort. The nitrile palm coating design improves grip, extends glove life in abrasive conditions and allows the hand to breathe. The glove is silicone free which prevents the transfer of silicone contaminants to metal parts prior to painting. The Oeko-Tex certification guarantees that the glove does not contain any harmful substances such as DMF and other chemicals.Fiber glass free, latex free, antisttic, food approved and machine washable at40°C. Sizes: 5-12.
Electro gloves MUST be stored out of sunlight and must NOT be folded. Due to the dimensions (250x500x100 mm) this case can be used for Class 0 upto Class 4 gloves, even in length 41 cm. New design with transparent cover (with UV filtration), can be fixed to a wall as well as transported by hand because of the retractable handle. Comes with a 100ml Luzenac talc container. The talc is recommended to increase comfort in use of insulating rubber gloves, it also makes them easier to done and doff.No PPE.
High shoe in microfiber with a synthetic antiperforation sole and composite 200J toecap. With scuffcap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/Vibram Ecostep (recycled material), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48 (D/XD).
Practical plastic hearing protector with 3 wearing positions (over the head, behind the head, under the chin) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Terylene suspension for Concept helmet with slip adjustment.
Comfortable half-mask in rubber, with unique sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Wide field of vision due to placement of filters. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
Super-light (300 g) safety helmet with short peak, made of strong ABS. With 6-point textile suspension (1000276) (51-63 cm), highly absorbent hydro-flock sweatband (1000299) and standard 4-point chin strap (1034406). Specially designed to prevent injury if helmet becomes trapped during a fall: chin strap opens automatically. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm Connect slot for attachment of hearing and face protection.
High safety shoe in black full grain leather. Ankle protection in red leather. Wide perforated 200 J-steel toe cap (width 9). Antiperforation midsole. Flat Vibram outsole, excellent anti-skid tread. Reflective band on heelpiece. Special Isoltane insole for high temperatures. Sizes : 38-47. Conforms to EN 20345 S3 HI HRO SRC
Comfortable, universally usable vented safety helmet, made of polyethylene, with 6-point plastic suspension. With rain channel, Euro pean 30 mm slot for attachment of hearing protection. Available in: white, yellow, blue, red and orange.
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Reduced peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: yellow, black, navy blue.
Fire-safe storage cabinet for storage of hazardous substances. Outside has a powder coat finish. The inside has a plastic finish tha t is resistant to light chemicals. The two doors are self-closing and have an air spring that allows easy opening. The cabinet conta ins three 33 litre shelf trays and one 55 litre bottom tray. There are inlet and outlet openings at the top of the cabinet (fan avai lable as option). The cabinet has a 90 minute fire rating. Available in: yellow. Dimensions: W 1200 x D 615 x H 1968 mm. Weight 420 kg. Delivery to location of use possible on request.
Absorbent pads measuring 7.6 cm x 122 cm. These heavy-weight socks are packaged in a box. Packaged per 12 pieces. These absorb all i ndustrial liquids, including oils, water, solvents and coolants. The great flexibility of the socks allows them to be easily placed around machines. Absorption capacity: 45 litres.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with ha lf and full face masks with standard threads.
AB2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C. Can be used in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0. 5 %.
This Plastic and Paper Sheet Cutter with concealed blade provides for swift and cutting accident-proof work. Designed for a whole host of applications: The Easysafe features a patented cutting head design allowing for easy initiation of the cut while maintaining blade contact with the material, even on single layers of film or paper. The piercing point allows for insertion of the cutter into all types of paper and plastic sacks. The integrated tape slitter safely cuts packaging tape without an exposed blade. The unit allows for an easy blade change 150; no tools required! The cutter is capable of being locked with a special key to change the blade. For use in the sensitive-products industries, e.g. food, designed to exclude hygienic risks resulting from unauthorized blade changes. No PPE. Blades: 1015780
Replacement knifes, straight with large rust-proof cutting surface. Thickness: 0,63 mm, Lenght: 60mm, width: 19mm. Pack of 10 pieces. No PPE.
Kernmantle rope with 11 mm diameter. For use in combination with rope grabs for 11 mm rope. With two loops at the ends and two fixed standard steel carabiner hooks.
Designed for SAFE collection of used blades and once completely filled final disposal. Always remember: Carelessly discarded blades represent an imminent risk of injury to one and all! Once FULL, screw the lid to the point where the red lock pin engages = the container is now SAFE for disposal. Loose packed item. Sized: 100 x 100 x 210 mm. No PPE.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Crosstech (resistant against bacteria and chemicals). Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Sizes: 38-48.
Super lightweight sportive spectacles (21g) in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. Flexible frame with soft temples (XST). The clear polycarbonate lens is fog-free on the inside and anti scratch on the outside.
Charging station for 1 battery with power.
Low shoe in white microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in Smartec Air Sanitized. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D (35-49), XD (37-49).
Classic safety glasses with replaceable lenses and soft temples (DCT), adjustable in the length. Protective side shields. Made with mineral glass lenses (HG): high chemical and scratch resistance, very limited mechanical resistance (12m/s).
Work trousers in easycare material that ensures good retention of shape and color with extra compartment and extra pocket with zipper. Back pockets with flap and velcro closure. Leg pocket with extra compartment and flap with velcro closure. Folding rule pocket with knife button. The knee protection pockets can be adjustable in two height levels. Reinforcement in holster pockets, folding rule pocket and knee protection pockets. The sizes C42-C64 can be extended by 5 cm. Quality: 65% polyester, 35% cotton. Available colors: red, sky blue, navy, green, khaki, gray and black. Available sizes: C42-C64 (extendable to C142-164), D84-D120.
Comfortable and sturdy stretch work trousers with reflection details, knee pockets and extra reflection piping. Quality: 65% polyester / 35% cotton. Available sizes: 42-66. Available colors: navy, black, and dark gray.
Refill can containing 400 pairs of memory foam, conically shaped earplugs for the HL400 dispenser (1048893). The skin friendly earplugs protect against general noise.
Protective foil for visor of 3M full face masks 6700S, 6800S and 6900S. Protects the visor against scratches and liquids. Suitable f or: processes involving chemical risks.
Signa T-shirt Bird Eye Knit, 100% polyester, rond collar, weight 150 g/m².
Double Lanyard, 1.8 metre length, consisting of elastic strap with integrated shock absorber. Non-stretched length of the Lanyard is 1.2 metres, which enables better manipulation of the Lanyard. Double Lanyard to allow continuous protection, even when switching be tween two anchor points. Fitted with a standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
High-cut safety shoe S2 made of nubuck leather, with 200J steel toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Padded water tongue. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non- slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: 35-48.
Dust and spatter-proof wall storage box in impact resistant plastic for storage of full-masks in industrial workplaces. Blue model, with pictogram, includes wall mounting hardware. Dimensions: 236 x 315 x 200 mm.
Handy wall box in blue made of strong ABS for storage of safety glasses. Dimensions: L23,6 x W12 x H12 cm.
This 0.63mm thick knife is very suitable for cutting different materials. The ergonomic support in aluminium makes the knife very stable and is suitable for left and right handed ones. Very handy slider for using the knife while wearing safety gloves! Spare blades: 1024827
Visor in green polycarbonate, gold coated. (Screen carrier to buy separately: 1014838 or 1000801). Resistant to high temperatures from - 50°C to +135°C. Dimensions: 500x250x1mm.
omfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools. Sizes: S/M - L/XL.
AX gasfilter in plastic housing for Moldex masks series 9000 for protection against organic gasses with boiling point <(><<)>65°C. For unique usage and only on full facial mask. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Replacement blades for knife Cartonax, straight. Thickness: 0,30 mm. No PPE.
Matching detachable helmethood (hood can be worn over a helmet ) for the parka Sentai. Colour: Navy
Working trousers in 60% cotton, 40% polyester (310 gr/m² twill). 2 thigh pockets under flap, 1 with mobile phone-pocket. Back pockets with flap and velcro closure. Double hem for +- 6cm extra length. Available sizes: 42-62 (NL); 36-56 (BE-FR). Available colours: Black, Navy, Khaki. Stockarticle in black, 42-52.