BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Shift work trousers with concealed zip, thigh pocket with concealed snap closure, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, 1 back pocket with concealed snap closure, reflective piping, D-ring, extra insert at crotch to prevent tearing. Quality: 65% / 35% cotton / polyester, 290 g/m². Available sizes: 44-66. Available colors: Charcoal gray / fluorescent yellow.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Ventilated forest trousers class 3 type A. To compensate for the higher weight and especially the higher heat accumulation associated with a higher protection class 3, these BasePro chainsaw pants are equipped with a ventilating mesh at the back of the legs. Zipper and 1 button closure; 2 deployed pockets; 1 patched back pocket; 1 patch pocket for pleoimeter and system for fixing the spark plug key; Elastic waist with belt loops and suspender loops with velcro (ref. 5SD4); Lumbar top with suspender loops; 3-needle stitching on the back to the cross. Quality: 65% PES / 35% cotton. Available sizes: XS-2XL. Available colors: Gray / black. Compliant with: EN 381-5: 1995 / Class 3 - 28 m / s design A and EN ISO 13688: 2013.
Flame retardant and antistatic ladies pants in strong inherent flame retardant material with an increased visibility at the bottom of the legs. Concealed zip, 2 deep side pockets, 2 back pockets with flap, folding ruler pocket, separate leg pocket and knee pockets. Available sizes: 36-46 EU. Available color: navy. Compliant with: EN ISO 11612 A1A2B1C1E3F1, EN 1149-5, EN ISO 11611 Class 1, EN 13034-6, IEC 61482-2 Class 1 (ATPV: 15 cal / cm²) PPE category 3.
The light and elastic Herford coverall has a fixed hood, a zipper concealed under a double flap with press studs and sleeve and ankle narrowing by means of press studs. The durable Flexothane® fabric protects you against rain and wind. Moreover, this smooth coverall is machine washable. Available sizes: S-3XL. Available colours: Green and navy.
Jacket Diablo multirisk: - 1 breast pocket; - 2 front pockets; - 1 sleeve pocket; - 1 inner pocket. - Stretch elements M-Move - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Fluo yellow/Grey. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN 1149-5, IEC 61482-2 class 1 and EN 13034 type 6.
The Croston jacket with its heavy canvas construction is highly suitable for harsh working conditions as it also has a good abrasion resistance: Straight collar; Foldaway hood in collar; Zip closure under flap with touch <(>&<)> close fastening; 1 patched chest pocket; 2 inset pockets with flap; 1 pen pocket; Round inset sleeves; Elasticated wristband with narrowing by touch and close fastening; Elasticated waist and narrowing by press studs at the sides of the waist; Elongated back tail; Detachable lining. Quality: 100 % polyester fabric with 100 % PU laminate; ± 260 g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluo orange/navy.
Hi-vis t-shirt Belenos 12702: - v-neck; - short sleeves with rib; - segmented reflection on the front, back, shoulders and sleeves. Quality: Cotton / PES 60% / 40%, 180g / m². available sizes: XS-3XL. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 class 2.
Besto life jacket Inflatable Pro 300N (automatically inflatable), suitable for all waters and all conditions such as extreme weather, when wearing heavy protective waterproof clothing. The vest is still safe in the event of unconsciousness and will turn you with the airways clear of the water. Includes reflective striping and viewing windows for visual inspection. Available colors: Fluo yellow / gray. Buoyancy: 300N Conforms to: ISO 12402-2, 275N.
Beannie for wet weather conditions. This hat has a 100% membrane for perfect protection but is breathable at the same time. The micro fleece lining provides warmth and comfort. Quality: Outer fabric: 100% Acrylic, Knitted 1g. Lining of the fabric: Insulatex Lined 40g. Extra information about the contrast fabric: Porelle Membrane. Available sizes: Universal. Available colors: Navy, black and fluorescent yellow.
This glove was developed together with experts from the Dutch Defense. The target was to develop a glove that offers both a maximum protection during fast roping practices and a high tactility for handling weapons in case of interventions. Where most fast roping gloves fail to meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm offers superb grip on both dry and wet ropes and is a great buffer against the heat accumulation during fast roping. On top of that, in this case handling weapons with these gloves is no longer a theme. Sizes: 7-14.
Flame retardant trousers Barcus with arc protection: Front fly with zip closure; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket; 1 gusset pocket; Elasticated waist; Knee pockets; Waistband with loops for belt. Quality: 24% PES + 75% cotton + 1 AST; ± 250 g/m². Available colors: Blue/fluo yellow. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Flame retardant softshell Umia with arc protection: Straight collar; Zip closure under flap; 1 patched chest pocket with flap; 2 inset pockets; 1 loop for gas detector; 1 loop for badge; 1 Napoleon pocket; Round sleeves; Sleeve narrowing by touch and close fastening. Quality: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-3XL. Available colors: Navy/fluo yellow.
Trouser belt in enamel blue for ambulance drivers from 90cm to 145 cm. Clothing sizes - belt sizes: BE 38/40/42 = 90cm BE 44/46/48 = 105cm BE 50/52/54 = 125cm BE 56/58/60 = 145 cm.
Sandal in microfiber/textile with a synthetic toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant. 100% metal- and leather free.
Compact personal alarm for lone workers and company first responders. The personal alarm can be used to alarm and to receive alarm messages. You can alarm by pressing the emergency button, by pulling the neck cord, via the man down function when there is no movement or lying position and via the timer function. The device has a talk-listen connection so that communication can also be done via speech. The TWIG Neo features GPS/GNSS for outdoor location determination. The personal alarm is often used by company first responders, deposit service technicians and healthcare professionals. The device can be worn around the neck and on the belt. The TWIG Neo comes with belt clip, charger and charging cable.
Put togehter with pre filter SR221 on gas, particle, or combined filter. Use also for fit test.
Hi-vis sweatshirt PW277: Knitted cloth with brushed back; neck protector; ribbed cuffs; Knitted Hem; Certified to EN ISO 20471 after 50 washes; UPF 40+ fabric blocks 98% of UV radiation. Quality: 65% Polyester, 35% Cotton, 300g/m². Available colours: Fluo orange/black <(>&<)> fluo yellow/black. Available sizes: S – 4XL. Complies with: EN ISO 20471 class 2.
Chemical and cut protection glove, 0,3 mm, Nitrile, sandy finish. Fully-lined, 18 gauge polyester, nylon, glass fibre thread, spandex. Oil and grease resistant, for allround work.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and para-aramid knitted cuff. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Standard fall harness with straight leg straps and 2 attachment points (back and chest). Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with buckle through buckle closure. Tires made of water and dirt-resistant polyester. Fall indicator front and back.
Glasses with clear polycarbonate duo-lens, equipped with supravision coating. With clip-in frame. Glasses with adjustable ear springs and soft-flex nose-bridge. Fits the face perfectly. X-tended sideshield for increased side protection. With supravision Excellence coating: Hi-tech coating, scratch-resistant on the outside, free of condensation on the inside, chemically resistant and very easy to clean. Colour frames: blue/charcoal.
Flame retardant and anti-static hi-vis waistcoat: V-neck; Zip closure; Without sleeves; Flame retardant reflective tape (50mm); Back length 70 cm. Quality: 98% polyester + 2% AST; ± 120 g/m². Available sizes: S-3XL. Available colours: Fluo yellow and fluo orange.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Low shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 9 KN.
Safety helmet made out of ABS with integrated spectacle. Has a 6-point textile cradle (53-64cm). Compatible with (1038817 KINRIEM 4-PUNTS VR EVOLITE/EVO). Available in: white, blue, red, white/smoke, blue/smoke, black/smoke, orange smoke and green/smoke.
Low shoe in waterrepellant microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in polyester. Outsole in EVA/Rubber, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
This premium quality welding trouser is made from split cowhide leather and stitched with para-aramid thread. It offers enhanced protection to the wearer when welding and is designed to last in the toughest environments. Made with cowhide leather for a premium finish Class 2 welding protection Button front closure Wider belt loops for wider belts Designed to be worn in a tough work environment CE certified UKCA marked Shell Fabric : Split Cowhide Leather, thickness 1.3 mm Available sizes: S - 3XL
Helmet liner in flame retardant material. Fits between the helmet shell and the interior, for warmth without compromising on comfort. With zipper connection to the frost neck cape.
Plastic pump for liquid 500ml 9972103.
Safety helmet with micro peak and integrated arc visor, made of strong ABS for improved low temperature (-40°) and side impact protection. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
Foldable mask, class P1, for irritating dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fit ted with non-adjustable, elastic headbands. Masks packaged separately. NPF: 4.
Seal as protection for the head, neck and shoulders as spare spart of hoods M-106, M-107,M-206,M-207, M-306, M-307. No PPE.
Absorption roll double-perforated every 23 cm in length, 38 cm x 22 m, 100% polypropylene. Heavy quality grey padded, with high absorption capacity and low lint. Suitable for replacement roll for mobile response cart. Suitable for almost every industrial application. Very economical in use. Absorption capacity of 45 litres. Weight 3.5 kg.
Face shield in clear polycarbonate for use with face shield holder S89 or helmet face shield holder S54 CE.
Male rectus threaded coupling for equipping V-500, V-100 and V-200 with male coupling.
Comfortable air hood made of neoprene with a panoramic PVC visor. The required air flow from the compressed air line is between 220 and 280 l/m. An audible alarm signal warns of a loss of pressure. The hood is supported on the shoulders so the head can move freely . Available in: yellow. Sizes: universal.
Dust-proof, impact resistant first aid kit made of ABS plastic, specifically for the Belgian market. Multi dimensions: 445 x 320 x 150 mm, for more than 20 people (industry 3). Includes wall mount and content. Additional refills available.
Post and cement base red/white, height 90cm. Chains and ribbons can be attached to control foot traffic.
Hearing protection required. Mandatory sign in self-adhesive polyester. Diameter: 200mm.
Magnifying welding glass for Speedglas 9000, 9001 and 9002 series.
Standard casing for hand wheel valves. Not PPE.
Rescue sign - First aid in self-adhesive polyester. Dimensions: 200*200mm. Not PPE.
Lightweight and comfortable welding shield, maximum protection when welding overhead, 50x108mm glass holder, weight 382gr, one of the lightest shields on the market. Supplied with welding glass 10DIN.
Adsorbs a wide range of chemicals, including acids and caustics Chemically inert - product does not degrade or react with adsorbed liquid. Green colour alerts workers that product is used with hazardous liquids. Green colour also allows easy identification for separate waste disposal. Perfect to clean up chemical spills or for use in laboratories Adsorption capacity: 76 litres
Absorbent pads measuring 7.6 cm x 366 cm. These heavy-weight socks are packaged in a box. Packaged per 4 pieces. These absorb all industrial liquids, including oils, water, solvents and coolants. The great flexibility of the socks allows them to be easily placed around machines. Absorption capacity: 45 litres.
Prinzing locking system for ball valves in red polypropylene. Two halves enclose the handle of the ball valve so that it cannot be opened or closed accidentally. Not PPE.
Mini cable locking system - nylon cable The mini-cable locking system with nylon cable is also suitable for locking interrupters. Not PPE.
Spill kit for small to medium-sized incidents involving ADR transport. Packed in transparent carry bag that can easily be stowed in the truck. Content: 25 cloths 41 x 51 cm (Art: 1004202), 4 socks 7.6 x 122 cm (Art: 1004210), 1 pair of gloves, 1 waste bag and 1 Emergency Response sheet. Absorption capacity: 37 litres. The absorption material in the spill kit is of UN quality.
Sterile universal dressing with four functions, especially suitable for fingers and toes. Contains one elastic bandage (6 cm x 3 m), with a sewn-in dressing (8 x 12 cm). Clear instructions on the inside of the pack.
Roll of white paper for paper roller on examination table (Art: 1006179). Dimensions: 50cm x 50m.
Protective cover disposable for air tube in PU convenient for air caps.
Bottle of 34 liters with 4 test gases for calibration of 4-gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%), H2S(25PPM) and CO (100PPM).
Model wallmounted eye/face wash including a stainless steel 11" round bowl, antimicrobially treated Axion MSR eye/face wash head to help protect against the growth of mold and mildew on the treated components. Inverted directional laminar flow and integral 3.7 and 1.3gpm flow controls, chrome-plated brass stay-open ball valve equipped with stainless steel ball and stem, and chrome-plated brass in-line 50 x 50 mesh water strainer. Unit shall also include cast-aluminum chromate protected wall bracket, tailpiece and trap, universal sign, 1/2" inlet, and 1-1/2" waste.
Drench shower for vertical installation shall include a green ABS plastic 270mm diameter showerhead with integral self-regulating 76l/min flow control, chrome-plated brass stay-open ball valve equipped with a stainless steel ball and stem. Stainless steel pull rod with triangular handle. Pictogram SP177 included
High-shoe S3, semi-orthopaedic, in full grain leather with toecap in aluminium sole with L-Protection. Equipped with 100% Nappa cowhide leather lining. Sole in Nitrile and HRO. Antibacterial insole. Sizes: 39-47.
Braces as spare spart for motor unit Versaflo. No PPE.
A heavy-duty Scraper with strong extra-wide grip to prevent sore hands and a signal red edge protector. No PPE. Replacement blades: 1024833
The 0.63 mm thick stainless steel blade is ideal for various materials. The ergonomic aluminium holder offers a high degree of stability and is suitable for right and left handers. The thumb can remain on the slider while cutting but the blade will slide back after use. Ideal for use with safety gloves. Replacement blades 199: 1016574
Dispenser with 500 pairs of disposable earplugs suitable for lower noise levels. The conical shape allows the earplug to be introduced into the ear canal easily, where the foam will expand to the ear canal's individual shape. Simply turn the knob at the bottom of the dispenser and the earplug will be dispensed into your hand. For the sake of hygiene, the container is replaced in its entirety. All Moldex products and packaging are 100% PVC-free. Wallholder available (SAP 1001186). MelLows SNR = 22 dB
Adapter for helmet, suitable for acetate and polycarbonate visors of Centurion. Not approved as PPE.
Inox scissors for cutting fabric or paper. Does not cut in skin.
Trousers, Guardian H²O polyester, flamretardant, anti-static, water and windproof, elastic in waist, 2 pockets, reflective tapes.
DIPHOTERINE® wall station, not frost free. Contents: Eyewash bottles: 2x500ml, aerosol mini DAP: 200ml, Afterwash: 200ml, DAP 5l. Dimensions: H: 725mm, L: 380mm, D: 300mm .
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Equipped with 1 D-ring. A loop can be formed by passing the webbing through the D-ring. Can also be used on vertical constructions. Length: 0.9 metre. Weight: 445gr. Anchor point for securing 1 person.
Standard Adjustable footrest Height is adjustable to two positions - Thanks to the 'floating' elevation, you can stretch your legs, stimulating blood circulation - The roughened surface massages the soles of the feet for stress reduction
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Sensors must be deactivated separately as required. LEL sensor is set for methane by default (specify if a different gas is applicable for the LEL sensor). Version: CO and LEL. IP rating 65 and Atex approved.
