BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
These foam rubber earplugs are fitted with a cord and a non-ferrous metal component. This model is 100% detectable and is highly visible thanks to its blue/orange colour. The foam conforms perfectly to the wearer's ear canal. These earplugs are primarily recommended for the food industry.
Super lightweight sportive spectacles (21g) in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. Flexible frame with soft temples (XCT). The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Prefilter as spare spart for motor unit Versaflo TR-300. No PPE.
The neoprene coated glove with Kevlar. Materials used in the glove are inherently flame resistant, even after washing. Arc Flash Hazard/Risk Category 2: helps protect workers against arc flash hazards.
Foot loop that can be deployed after a fall to remove pressure from the groin and avoid suspension trauma after falling. Not PPE.
Thin work glove with a microporous nitrile foam coated palm. This ensures a very good dry grip and protects against moisture. Oeko-Tex approved. Resistant to contact heat up to 250°C (for 15s). Sizes 5-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.2.X.X.X.X
Hi-vis Raincoat and Rain Pants. 50% Polyester/50% PVC, 110 g/m², With reflection. Raincoat: Hood with drawstring. Sleeves with adjustable Velcro closure. Two outside pockets. Rain pants: Elastic at the waist. Highly flexible seams. Two side pockets. Available colours: fluorescent yellow, fluorescent orange. Available sizes: XS-5XL. Complies with: EN 343 3.1.
Laces, black in polyester. Length: 100cm. No PPE.
High shoe in water-repellent Perwanger leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable GEOX and active carbon activated antibacterial insole. Insole EVA + TPU/Nitrile, resistant to 300°C. Sizes: 35-48.
Lightweight air hood with inegrated bumpcap. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50, with Jupiter and compressed air, NPF: 500 with TR-300, TR-600 and TR-800.
Safety glasses with a black frame with orange accents. Soft nose bridge and temples. Polycarbonate lenses for UV protection with a anti-fog coating (HydroShield).
Synthetic leather glove, Winter-lined, 0,7 mm, Synthetic leather, Polyester, Fleece, Cat. II, Black, green, Chrome free, Waterproof, Winter-lined, Velcro®, for precision work. EN 388:2003, 1121 EN 511:2006, 11X
Plug for connection USB cable of the HGAS-HTRAM CO2 detector..
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. BOA closing system. TPU-scuffcap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Dark green disposable gloves in nitrile. The profile guarantees excellent grip in dry or humid conditions. Un-powdered. Weight (size M): 6,0 g / Thickness: 0.12.-0,17mm). Applications: Light chemical applications in labs, assembly, product control, food sector. Tested for food contact (10/2011). Available sizes: S-XL.
Comfortable half-mask with sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Large field of view due to placement of filters. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5 %. NPF: dependent on the filter used.
Hood, knitted Nomex®, flame retardant, with long collar, covered face with two eye openings. Available in: beige. Sizes: 1 size.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Visor in actetate in order to be able to clean the visor with thinner. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
ABEK1P3 plastic filter housing with EasyLock connection for series 7000 and 9000 of Moldex. Protects against organic and inorganic gases and vapors with boiling point<(>&<)>gt >65 °C, sulfur dioxide, acid gases and vapors, ammonia and organic ammonia derivatives and toxic dust, mist and smoke particles. Filter Class 1: up to max concentration of 0.1%.
Trousers, MR - 65% cotton 35% polyester, canvas, 320 gr/m², zipper, 2 front pockets, 2 loose hanging pockets, 2 back pockets with press-stud, ruler pocket, thigh pocket, handy pocket, Cordura® knee pockets, belt, Cordura® reinforcements, reflective piping. No PPE.
ABEP filter for TR-600 and TR-800 motor unit. Protects against organic and inorganic gases, sulphur dioxide and particulates. Can be combined with filter cover TR-6100FC.
Low shoe in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Semi- orthopedic insole which is conform to ESD. Sizes: 38-48.
Functional layer 3 wind- and water repellent softshell jacket. Quilted padded lining. Two breast pockets, left with inner phone pocket. ID-card holder. Two side pockets. Sleeve pocket on left arm. Inner pocket on the left side with handsfree opening. Ventilation zippers under armpits. Extended back. Reflective piping on sleeves and back. Adjustable and detachable hood. Fleece lined collar for better comfort. Adjustable cuffs and waist. Quality: 100% polyester. Available sizes: XS - 4XL. Available colors: Black, white, navy, grey, green, sky blue and red.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
Sweatshirt with 1/2 zip and contrast colours under arms. Qualiy: 65 % Cotton and 35 % Polyester, 280g/m2. Available Colour: White, navy, grey, black, forest green, red, sky blue and black/yellow. Available Size: XS-4XL.
Hip pockets provide just that little bit more storage space for all the tools you carry with you while working. These Swing pockets are made entirely of Cordura and offer various storage options.
High shoe, metal-free safety shoe S3 in black full grain leather with 200J synthetic Duo Component toecap, protective scuffcap. BOA closing system. Fitted with a breathable textile lining. Padded tongue and removable, antistatic insole, moisture absorbent. Sole made of PUR (PU/PU): suple and lightweight, oil and petrol resistant, slipresistant. ESD: electrostatic discharge. Sizes: 38-52 (10, 11, 12).
Low shoe in black recycled microfiber/velours (50% recycled polyester), with a non metallic antiperforation sole (50% recycled polyester) and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF BioMass Balance (100% renewable sources), SRC antislip, oil and carburant resistant. Removable perforated insole Maxi-Soft Duo Green composed of a layer of PU Dynamic from BASF® with thermosensitive shape memory and a layer of BASF® BioMass Balance Elastopan, this improves weight distribution, reduces pressure points and absorbs and relieves stress on the body when standing for long periods and walks. 100% metalfree. Sizes: 35-48.
Adapter Peltor P3EV/2 for helmets with standard 30 mm slot (except G2000). This adapter can also be used for attachment of visors.
Long sweatband made of genuine leather. Available in: brown.
The Secure Fit safety spectacle is comprised of a rimless lens and fixed-length temple arm. An integrated side-shield is included for added protection. Temples also feature 3M Pressure Diffusion Temple Technology which helps diffuse pressure over the ear to enhance frame comfort across a diverse workforce. This innovative design promotes improved comfort and security of fit.
Gloves with blue nitrile layer on a jersey lining. Palm coating and safety cuff. Excellent abrasion and cut resistance, very good grip when working with oil and greases. Flexible, comfortable and ideal for use in automotive, construction and metal working industries. Application: heavy working conditions. Sizes: 8-10.
Gloves with supple neoprene coating. The knit cotton lining provides excellent perspiration absorption. Antistatic.Good grip in damp conditions.
Comfortable, lightweight safety glasses made of synthetic material. Ergonomic fit with two separate lenses and adjustable nose bridge. Light grey, scratch resistant, anti-fog polycarbonate sun lenses. Extra options: Tada glasses case and Obi glasses cord. Also available with clear lenses. For light- or medium-duty mechanical work.
ABE2K1 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point > 65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentrati on of 0.1%.
Safety boot in PVC with nitrile non-slip sole. The boot has a steel toe cap in compliance with standard EN 20345. The boot is resistant to hydrocarbons, animal fats and vegetable oils. The Guardian is very flexible and can be used in cold conditions. Sizes: 37-47.
Very comfortable Fall arrest harness with 2 mounting points on back and chest. Breast Fixation Point by D-ring. Leg and shoulder straps with quick release, very easily adjustable. Harness very easy to put on. Universal size. Weight: 1,28kg. Suitable for general industrial applications.
The Mizar is a TÜV-approved safety knife with automatic blade retraction that is excellent for cutting many different packaging materials, especially cardboard and foil. A high-quality plastic construction in a handy ergonomic design is the key to working efficiently. This means fatigue-free work for the user and increased productivity for the company. With its unique "3 in 1" slider, the knife can be quickly and easily unlocked for cutting when needed, securely locked for transport, and easily opened for blade replacement. With its sqeeze lever grip, both right-handed and left-handed users can cut equally well. The blade can be changed without tools, simply, quickly and safely. No PPE. Blades: 1016008
Safety helmet made out of ABS with wheel ratchet, short peak and 6-point cradle out of textile (52-63cm) with a strong absortbant Hydro-Flock sweatband. Has an integrated visor with anti-scratch and anti-fog coating. Colors: white, yellow, blue, red, green, orange, black.
Every day in many industries, people are sustaining hand and finger injuries that are preventable. Using the correct safety devise should be an essential part of everyday life. If you are working in areas where objects could hit you on the head, you would wear a hard hat. If your eyes are at risk from foreign objects or wind blown particles, you would wear safety glasses. Think about your hands in the same way! Be sure to keep them safe and out of harms way, be sure to use the Fingersaver, don’t take risks with you hands.
The new HAZMAX S5 FPA HRO boot, in green, chemical resistant HAZMAX, constructed seamlessly, equippes a 200J steel toe cap and has an antiperforation sole in stainless steel, with an even better cut resistance than your conventional safety boot. Boot is adjustable in height. Lining in knitted nylon. Aside from strong chemical resistance against chemical vapours and materials, this boot is excellent for fire fighters. Its vulcanised sole is resistant to contact heat up to 300°C, fuel, oils and is cold-isolating. Comfortable, removable and washable inlay sole up to 40°C. Sizes : 36 - 48.
Jacket, 100% polyester, PVC layer, 230 gr / m², fleece lining, concealed hood, fleece lined upper body, print opening, spacious fit, secure pockets, adjustable cuffs through Velcro. In accordance with EN 343 3.1.
Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Low shoe in waterresistant black full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRA antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
Low shoe S1P in synthetic microvelour with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12, 14: 35- 52.
Tunic, polyester / cotton, 195 g / m², height 80 cm without sleeves. Available sizes: 0-6. Available colors: Black, gray and sky blue.
Full stretch pants for more comfort and freedom of movement: • stretch in 4 directions over the thighs and buttocks • stretch at the back of the knee and calves • mesh ventilation openings with zippers • ventilation at the waist through perforated waistband • leg pockets, telephone pocket with magnetic closure • loop for badge holder • ruler pocket and pocket with knife button • 2 hammer loops • 2 pockets reinforced with Cordura® • reflective details • knee pockets with Kevlar stretch • loop for badge holder. Quality: 65% polyester, 35% cotton, 235 g / m². Available colors: Navy, Gray and Black. Available sizes: C44-C62, C146-156, D84-D120.
Brown, metallic safety glasses with polycarbonate lenses which protect against dust and impact. Adaptable nose support in silicone with antislip properties benefit wearing comfort. Lateral protection in clear polycarbonate and riveted. Suitable for light or medium mechanical work and laboratory applications.
Automatich safety knife with 3 sided slider. For work with triple-walled corrugated board boxes. MAXISAFE adapts to the type of cut required at the time, be it sideways, horizontal or straight from "up top". Designed for a minimum of effort at a maximum of efficiency. Ergonomically styled plastic handle with metal wear-protector at the blade outlet. For use by right- and lefthanders. "GS-TESTED FOR SAFETY". Easy blade change: no extra tools required. Typically, users of safety knives with automatic blade return needed to be trained to release the blade slider during the cut in order to enable the auto-retract function. Only minimal training is necessary. The ingenious mechanism within the MAXISAFE will automatically return the blade to the safe position at the end of each cut regardless of the position of the blade slider. Replacement blades: 1024827
Comfortable half-mask made of silicone rubber, compact form with good fit to the face. Fitted with adjustable head and neck bands for precise adjustment of the mask. With the quick release system it's very easy to don and remove the mask. Half-mask can also be combined with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used.
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6300FC.
Pre-filter for TR-600. Ensures longer life of main filter.
Waistcoat in 100% polyester (125g/m²). Horizontal reflective striping, velcro closure, black border. Available sizes: S/M - XXL/3XL. Available colours: pink, bottle green, navy, black, red. No PPE.
Low shoe in white microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in Smartec Air Sanitized. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D (35-49), XD (37-49).
Charlotte made of PP and folded. After use it remains open, so one sees the difference between used or not. Available in different colors. Packed in plastic bag or dispenser box. Very good fit. Feather light and pleasant to wear. Available sizes: Universeel (52cm en XL (55cm).
High shoe in microfiber, with a synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in TPU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-47.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating ensures for a good grip. 13 gg liner and extra reinforcement along the thumb and index finger. Very high level of cut protection, approved for contact heat up to 100°C (15sec). Approved for ESD environments and food safe for all types of food. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
Hi-vis sweatshirt PW379: Knitted cloth with brushed back; Stylish unisex design; Designed with a comfortable fit; neck protector; Ribbed cuffs for warmth and comfort; Segmented reflective striping; Certified to EN ISO 20471 after 50 washes; UPF 40+ fabric blocks 98% of UV radiation. Quality: 65% Polyester, 35% Cotton, 300g/m². Available colours: Fluo orange/black <(>&<)> fluo yellow/black. Available sizes: S – 4XL. Complies with: EN ISO 20471 class 2.
This high-quality welding jacket is made of split cowhide and stitched with para-aramid thread. It provides enhanced protection to the hull during welding and is designed to last in the toughest conditions. Features: CE certified. Class 2 welding protection. Concealed easy to open closure. Velcro adjustable cuffs for snug fit. Designed to be worn under harsh conditions . In line with : EN ISO 11611 Class 2 (A1)
Compact, rechargeable, durable, and waterproof headlamp, with lighting designed for proximity vision and movement. 450 lumens
Modern spectacle. Fitted with temple ends with non-slip components, headband and an extra comfortable frame which creates a close seal to protect from particle ingress and splashes. Top choice for working environments with dust exposure. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision Extreme coating. Frame: black/grey.
Heat and cold insulating insert sole made of 100% wool. Fits in any shoe and is mainly worn in the winter. Material: 100% wool. Suit able for: general industrial applications.
Full-face mask Basic Plus is the economical version of full-face mask 3S. Mask made of very comfortable, high-quality rubber. Antifo g visor made of acetate, provides wide field of vision (80 %). Speech is conveyed via exhalation valve located just above the filter connection. The headband is easily adjustable, no carry strap for hanging the mask around the neck. Fitted with standard EN 148 thr eaded connection for filters or air hoses with matching coupling.
Black 61 cm long latex glove in an extra thick version of 2.6 mm. Provides a rolled edge to protect against leaks in damp conditions. Suitable for maintenance services, public sector, sewerage work and industrial cleaning. Sizes: 7,5-10,5.
Ergonomically shaped knee protectors made of rubber with a foam rubber cushion. The outer layer is coated with non-slip material and has a high abrasion resistance. With a handy, adjustable closure. Sizes: universal size.
Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.
Safety spectacles with wide field of vision and gray polycarbonate lenses, treated with an anti-fog coating. With soft temples and s oft nose bridge with a non-slip effect.
Safety ashtray Elite Smokers Cease Fire - Cool black Dimensions: 965mm x 305mm
Low shoe Till Low ESD in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/Rubber, resistant to fats and oils. Fitted with a scuffcap. Sizes: 36-48.
Earmuff X3 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. 'Spacers': an extra seal ring which reduces resonance. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 33dB.
Overshoe in PolyPropylene in white. Seamless at the bottom of the overshoe to prevent wear and tear. Dimensions: 42x15cm, fabric weight: 38g/m², thickness: 50 microns. No PPE. Package per 100 pieces.
