BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Fully seamless, grey, knit gloves with grey PU coating on a white HPPE / Lycra liner. Available in: grey/white. Sizes: 7/ 8 / 9 / 10 / 11 / 12.
knitted cut resistant glove (8cm cuff) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Available sizes: 7-12. Conform: EN 388 4.X.4.2.C and EN 407:X.1.X.X.X.X.
Fully seamless, grey, knit gloves withgreyPU coating on a white Dyneema® liner. Available in: grey/white. Sizes: 8 / 9 / 10 / 11 / 12.
Cut resistant, completely seamless grey knit gloves with grey PU coating. Excellent tactility combined with highest level of cut protection. Sizes: 7/8/9/10/11. Suitable or: circumstances in which a good grip and cut, abrasion or puncture resistance are required, such as packaging, installation, assembly, automotive industry, glass and paper industry.
Glove with very high cut protection, suitable for handling very sharp parts in the glass and metal industry.
Cut resistant glove without seams with silicon-free PU coating. Wrist and forearm protection thanks to a long 15 cm cuff. The coating gives a very good grip in work requiring good dexterity in dry conditions. The glove liner is a combination of HPPE, fiberglass and nylon, and has, due to very dens knitting, a very high cut resistance. Usage: Situations where adhesion, cut resistance, tear and perforation are required, such as packaging, assembly, the automotive industry, the glass and paper industry.
The lightest and most comfortable cut resistant glove (18 gauge) thanks to the use of Dyneema Diamond Technology. A perfect synergy of high sensitivity, cut resistance and comfort. This glove has an excellent performing thin nitrile foam coating (without silicones) with an exceptionnal grip on oiled or slippery surfaces and gives contact heat protection upto 100°C. Thanks to its light weight and the Dyneema® Diamond fibre, your hands stay well ventilated and get a "cool" grip. No use of glass fibre or any other external cut resistant fibres so the cut resistant properties remain intact. Ideal for use in applications such as assembly of thin parts or montage. Available sizes: 7-11.
The lightest and most comfortable cut resistant glove thanks to the Dyneema® Diamond fibre and technology. A quality combination of high sensitivity, cut resistance and comfort. The Dynablade PU Light has a polyurethane (PU) coating which gives you exceptionnal grip. Thanks to the special Dyneema® fibre your hands are kept cool and ventilated. A no use of glassfibre guarantees a longer duration of its cut resistant properties. If you work in applications such as assembly, packaging or logistics, this glove is a must have. Available sizes: 7- 11.
Winter knitted polyamide glove in black colour. Complete coating in nitrile foam. Hand palm with nitrile dots. Foodapproved.Length 26 cm. Sizes: 7 - 11.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (18 gauge) with insulating layer nitrile foam/aqua PU in the palm, with extra coating between thumb and forefinger.Heat resistant up to 100°C contact heat. Sizes: 6-11.
Comfortable, cut resistant glove using the unique Dyneema® Diamond Technology. Its 13 gauge lining has double the cut resistance in comparison with a concurrential glove, but keeps comfort at a high level (high sensitivity and a cool feeling). It has a polyurethane coating with high grip and without silicones. Cut resistant properties are guaranteed because no glassfibre is being used. Perfect for use in dry environments with high cut risks such as paper and glass industry, assembly or logistics. Available sizes: 7-12.
Nitrile gauntlet gloves, lined with Intercept™Cut Resistance Technology that provides ISO C cut protection. Nitrile barrier provides advanced chemical protection from many frequently used chemicals. With new Grip Technology for the handling of wet or oily parts providing enhanced dexterity, grip and comfort. Finished at top withstraight-cut opening. Antistatic and suitable to use in foor environments .
Fully seamless knitted glove with a black PU coating on a blue 15 gauge liner (HPPE / Polyester / fiberglass). High sensitivity, elastic, extra thin and a good grip. Sizes: 7/8/9/10/11. This glove offers the highest comfort combined with an average cut resistance level (class B). Applications: General all-round work glove, light assembly, logistics., Transport and storage. In accordance with: EN388 3.X.4.2.B
knitted cut resistant glove (cuff 13cm) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. Long for extra protection of the forearm. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Gives protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Conform: EN 388 4.X.4.2.C and EN407: X.1.X.X.X.X.
A real innovation within hand protection thanks to the use of new Black Dyneema® Diamond Technology. This new technology grants the Dynablade Foam Black a hight cut resistance level 5 without use of any other cut resistant fibre such as glass fibre or steel. All of this results in a unique and comfortable glove (13 gauge). It has a high performance foam nitrile coating (without silicones) with exceptionnal grip on oiled or slippery surfaces. Thanks to the Dyneema Diamond fibre your hands are well ventilated and the glove receives a "cool" grip. The black colour of the glove makes it a perfect solution to be used in grimy environments. Perfect for use in applications where a high cut resistance is needed, such as assembly of thin parts. Available sizes: 7-11. In line with EN 388 4.X.4.2, ISO 13997 Class D.
Knitted cut resistant glove (8cm cuff) with double nitrile coating. A gray smooth base nitrile coating on palm and three quarters back that prevents fluids can penetrate. Moreover, a black foam nitrile coating for excellent grip in dry and wet conditions. The carrier consists of highly cut resistant fibers, nylon and spandex. . Very comfortable and excellent protection against abrasion and cut risks, in many applications where oil is being used. Application: glass industry, metal assembly, plastic injection, etc. ..
Winter glove with a gray nitrile coating and warm acrylic lining. This glove is fully coated wiith a high dexterity and outstanding wearing comfort. Unique glove that can be used widely since it combines different levels of protection. It offers basic protection against cutting risks (level B), but can also be used for short contact with hot objects up to 100 ° C (EN407) and for work in cold environments (EN511). Use for general applications in colder environments. Available sizes: 7/8/9/10/11. In accordance with EN388 2016: 4.2.3.2.B, EN407: X1XXXX and EN511: 020
Soft cut resistant glove that combines confort and durability and offers a good protection agains sharp objects. The nitrile foam coating is DMF-free and breathable, so the hands of the user stay cool all day long. Touch sreen compatible.Sizes 7 - 12.
Seamless knitted Kevlar glove, with palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish.
Cut resistant glove without seams with black silicon-free PU coating. The coating gives a good grip in work requiring good dexterity in dry conditions. The glove liner is a combination of HPPE, fiberglass and nylon, and has, dueto very dens knitting, a very high cut resistance. Usage: Situationswhere adhesion, cut resistance, tear and perforation are required, suchas packaging, assembly, the automotive industry, the glass and paper industry.
Cut resistant glove made with the latest Dyneema® Diamond technology and a gray, abrasion resistant PU coating. Guaranteed cut resistance (level B) combined in a lightweight glove. (up to 30% lighter). A "breathable" glove, finger-sensitive and a good grip make this a comfortable "second skin". No use is made of glass fiber. According to EN388: 2016: 4.4.4.2.B
Impact resistant glove with cut-resistant liner and nitrile coating. Sizes: 7 (s)- 12 (3xl)
Finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 250°C for 15 sec. Gloves GS industry.
Cut resistant, completely seamless grey knit gloves with black nitrile coating. Excellent tactility combined with highest level of cut protection, even on oiled objects. Sizes: 8 / 9 / 10 / 11.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The full nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex certified.
Cut resistant knitted glove with a foam nitrile coating. The liner or support is made of HPPE, nylon and glass fibre. The foam nitril coating guarantees a fine grip on oiled surfaces. Extra reinforcement between index and thumb. This thin glove combines a medium cut-resistance level (class B) with high comfort (lightweight and dexterity). Applications: General industrial work like machine maintenance or treating sharp oiled objects. Available sizes: 7-11.
Industrial protective glove. Synthetic textile liner with a synthetic coating. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF- free, antistatic and food approved. Sizes: 6-11.
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Half nitrile coating on the palm with sand grain finish for extra grip. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.D.P
Cut protection and contact heat protection up to 100°C (15 sec) with unique design at the hand so that the sleeve stays in place and does not curl up.
Guide 6202 CPN - A cut, puncture and needle resistant glove in soft synthetic leather for good versatility and a steady grip. Alycor etechnology in the palm, over the fingertips and the upper surface of the fingertips; protects from needles and other sharp objects. Designed particularly for situations where it is vital to keep sensitivity and where there is a risk of needle puncture and cut injury. The glove is designed fully in black to achieve as low profile as possible. Suitable for police and customs officers, security guards and prison officers where there is a risk of needle puncture and cut injury. Sizes: 6-13
Heat resistant glove in full grain goatskin on the palm and full grain cowhide on the back of the hand. Fully Kevlar lined. Reinforces thumb, index and seams. Oil and water repellent. For use in harsh and moist environments. Size: 7-13.
Samurai® glove made with innovative cut-resistant Bio based Dyneema® Diamond fiber, which is partly sustainably produced based on wood pulp. Palm dipped with nitrile foam coating. This glove combines high cut resistance (class C) with excellent finger dexterity. This glove is Touch Screen compatible. Application: Fine assembly, inspection, logistics activities, machinery operation. Complies with: EN388:2016: 4.4.4.2.C
Blue knitted food approved glove from the Revillet range (per piece) in stainless steel and glass fiber with knitted cuff. This glove has excellent cut resistance, tested according to TDM standard. Prewashed, to make sure it will keep its form after nex washing cycles. Washable. Sizes: 6-11. Size 5 on demand.
Hypo-allergenic gloves. The patented PVC immersion method guarantees a high resistance to various harmful chemical products, while the Kevlar® liner provides a high resistance to cutting, abrasion and tearing. Available in: blue. Sizes: 8M / 9L / 10XL / 11 XXL.
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 457mm.
Gloves with an innovative yarn structure, in nylon, with an optimalDyneema® content on the back and a polyurethane coating on the pa lm.Very high dexterity due to 18 gauge technique.The Hyflex providesexceptional comfort due to a lycra lining and the tricot cuff as well as a long service life due to the high abrasion resistance. Available in: grey. Sizes: 6 / 7 / 8 / 9 / 10 / 11, total length: 210-265 mm.
Gloves knit from Zirnium® yarn, palm and fingers covered with cowsplit leather, 1.1 mm thick, 25 cm length, seams stitched with Kevlar® fibres.
Multifunctional glove for police task forces, secufrity guards, customs and defense. Feels like second skin due to the liquid repellent and flexible goat skin leather. The spandex nylon on the back of the hand gives high comfort and breathability. Cut and heat resistant, flameretardeant liner. Reinforcement of the crotch between index finger and thumb, Neopreen knuckle protection. Short cuff with cutout for watches. Sizes: 6-13.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The coated knuckles and the double coating in the palm provide excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides good grip. Impact-resistant backhand, 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level D, approved for contact heat level 1. ESD approved and food safe. Oeko-Tex approved. Touchscreen. Sizes : 6-12.
Cut resistant glove on seamles knit liner in HXFIBRE (18 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.
Gloves with extreme cut protection featuring INTERCEPT™ Technology while maintaining enhanced flexibility and tactility. These ultra-lightweight and ultra-thin breathable gloves are touchscreen compatible to ensure that workers do not need to change or remove gloves between tasks High dexterity combined with unmatched comfort and precision while achieving excellent abrasion resistance. Electrostatic dissipative (ESD) protection for electronic components, batteries and other sensitive equipment and parts. Tailored fit at the base of the pinky finger better matches natural hand contours Dermatologically approved by Dermatest®. Antistatic, latex free and washable at 40°C. Sizes: 6-12.
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 356mm. Breedte: 35,56cm.
Glove with palm in goat leather.Back and cuff in cotton. Kevlar liner in the palm. Protects against heat from sparks.Sizes : 8/9/10/11
Budget-friendly glove with black PU coating, large size range.
Knitted cut resistant glove (long cuff 13 cm) with a new foam nitrile coating with touch screen functionality. The lining consists of high cut-resistant PE fibers, nylon and Spandex. The nitrile coating (on the palm) provides an extremely good grip on dry, but also on wet and oiled surfaces. Very comfortable and excellent protection against abrasion and with an extra reinforcement between thumb and index finger. Also provides protection against contact heat up to 100 ° C. Application: glass industry, metal assembly, injection molding of plastics. Available sizes: 7-12. Conforms to: EN388: 4.X.4.3.D and EN407: X.1.X.X.X.X.
Sturdy puncture resistant glove with 8 layers of metal fabric in the palm and 4 layers on the underside of the fingers and over the fingertips. The top of the fingers and knuckles are also reinforced.
Glove with PE and Zirnium with PU coating and reinforcement in split leather on palm, index finger and thumb. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 7 / 8 / 9 / 10 / 11.
The ever popular medium weight cut level E 50 range is evolving into upgraded equivalent styles with higher specification providing incredible level F cut protection to EN388:2016. EN388: 2016 maximum level F cut resistance; Rhino Yarn™ cut resistant technology; EN388: 2016 4 × 4 2 F; High level of abrasion resistance; Dry PU palm coating provides secure grip; Dark colour liner hides dirt, extending life of the glove; Reinforced thumb crotch with nitrile patch.
Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Thumb and forefinger reinforced, double stitched, precurved fingers, the palm has a striking red color. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Touchscreen function on the forefinger. Sizes: 7-12. Conform: EN388:2016 3.X.4.2.D.P, EN407: X.1.X.X.X.X
The latex coated glove with steel, fiberglass, Kevlar lining and extra long knit cuff is the practical solution for a safe way to manipulate glass, metal and plastic. She is distinguished by an exceptional cut resistance, excellent overall mechanical performance and superior comfort. In wet or dry conditions, this glove an excellent grip thanks to the coating on the palm of natural rubber. The PowerFlex ® 80-658 is a unique glove on a highly efficient way to adequately protect combines with natural dexterity.
Black Zirnium yarns knitted glove with black nitrile foam coating in the palm. Excellent cut resistance and dexterity and very good grip in oily conditions Sizes: 7-11.
The new INTERCEPT™ fibre offers unrivalled cutting protection and more comfort and mobility. The coated palm design gives the user more grip, prolongs the life of the glove during abrasive work and allows the back of the hand to breathe. The silicone-free PU coating does not hinder processing of painted metal parts. The grey coating camouflages dirt when working in polluted environments.
This glove combines tough protection with natural comfort. The Intercept™ Cut Resistance Technology provides extreme cut protection, the liner made with water-based polyurethane/nitrile provides enhanced comfort and dexterity, it is solvent free and OekoTex 100 certified. The Fortix technology provides extended use with up to 4x the durability in the thumb crotch region versus the standard glove without thumb crotch reinforcements. Latex and silicone free. Sizes: 6-11.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam in the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Cut resistant 5-finger glove with palm and back in water repellent cowsplit leather. Inner lining reinforce with knitted TEKINOX®. 15cm cotton protective cuff with extra wrist protection and seams in para-aramid. Total lenght: 35 cm. Sizes: 7-11. Suitable for : metal and glass industry, heavy industrial activities. In line with. EN388:2016: 4.X.4.4.F
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. Oekotex certified.
Cut-resistant glove with HXFIBR fiber (18 gauge) with PU coating. Very finger sensitive. reinforcement between thumb and forefinger. Thight fit and flexible cuff, without glas fibre. ESD, touchscreen function. Free of DMF, silicone and natural latex. Oeko-Tex standard 100. Sizes: 6-12. In line ith: EN388:2016 4.X.4.2.C, EN407: X.1.X.X.X.X.
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 254mm.
Glove made from renewable raw materials: natural bamboo fibres, with flexible coating that ensures high sensitivity, comfort and effective grip. This glove adapts exactly to each individual shape of the hand after 3 to 5 minutes. Exceeds REACH regulations. CO² neutral production in Germany, short supply chain.
The neoprene coated glove with Kevlar. Materials used in the glove are inherently flame resistant, even after washing. Arc Flash Hazard/Risk Category 2: helps protect workers against arc flash hazards.
High Cut resistant glove with Nitrile Coating * High dexterity / 18 gauge * Reinforecement between thumb and index finger * Touch Screen functional * Made from black Kevlar * Highest cut resistant class F * Short protection against contact heat up to 100°C
Very comfortable high cut resistant (cut class E) glove with a gray PU coating. Highest dexterity (18 gauge). Ideal for dry applications in disassembly, handling of objects with sharp edges. Touch screen functionality. According to EN388: 4.X.4.2.E
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating ensures for a good grip. 13 gg liner and extra reinforcement along the thumb and index finger. Very high level of cut protection, approved for contact heat up to 100°C (15sec). Approved for ESD environments and food safe for all types of food. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
A supple glove with cut, puncture and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and the fingertips from needles and sharp objects. Knitted of HDPE cut-resistant fibre, which gives the whole glove cut protection level 5 according to EN 388. Liquid-proof all the way down over the knuckles, making them suitable for e.g. cleaning and wet/oily work. Extremely durable dipping. In conformity with: EN388:2016 4.X.4.3.F
Providing EN388: 2016 maximum level F cut resistance and abrasion resistance the 50-6121 has a breathable, sandy foam nitrile palm coating designed to deliver excellent grip, particularly in oily conditions. The thumb area has been reinforced with a nitrile patch to provide additional support and protection in a key high action area, extending the life of the glove. EN388: 2016 level E cut resistance; EN388: 2016 3 × 4 3 F; EN407: 2004 × 1 X X X X; Rhino Yarn™ cut resistant technology; High level of abrasion resistance and durability; Good oil and dry grip; Breathable open back and coating; Dark colour hides dirt, extending life of the glove; Reinforced thumb crotch with nitrile patch.
This glove, made with the very latest Dyneema® Diamond Technology 2.0, provides unparalleled comfort combined with high cut resistance and high fingertip sensitivity, and this for tough work. This without using glass fiber! The patented foam nitrile coating provides a solid "oil grip" and is extremely durable so that it can be worn longer in abrasive applications. The glove also offers short-term protection against contact heat up to 100 ° C. The cooling effect of the fiber provides the necessary comfort during the entire working day! Intrinsically one of the most cut resistant fibers available at the moment !! Available sizes: 7-12. Conforms to EN388: 2016: 4.X.4.3.D and EN407: X1XXXX
Very thin and light glove, 15 gauge. The INTERCEPT™ yarn provides high cut protection while providing dexterity and comfort. The nitrile palm coating design improves grip, extends glove life in abrasive conditions and allows the hand to breathe. The glove is silicone free which prevents the transfer of silicone contaminants to metal parts prior to painting. The Oeko-Tex certification guarantees that the glove does not contain any harmful substances such as DMF and other chemicals.Fiber glass free, latex free, antisttic, food approved and machine washable at40°C. Sizes: 5-12.
All-round white glove for catering operations. Mechanically strong, heat resistant and impervious for ovens, dishwashers, autoclaves, cooking activities. Nitrile glove of 45 cm with a cut resistant insert and brushed finish on the fingers. Sizes: 7 (outer size:9), 9 (outerr size: 11) and 10 (outer size 12).
